The AI561 is an analog input module for the AC500-eCo familySupply voltage: 24V DCPower Consumption: The current drawn from a 24V DC power supply is approximately 10mASurge voltage: 35V DC max for 0.5sMaximum power consumption in the module: 2.7WMounting position: horizontal or verticalCooling method: natural convection cooling, which cannot be obstructed by cable ducts or other components in the control cabinetNumber and type of input channels: 4 individually configurable voltage or current input channelsChannel grouping: 1 group of 4 channels eachResolution:Unipolar voltage: 0V...+5V, 0V... 12 bits at +10VCurrent: 0mA... 20mA、4mA... 12 bits at 20mABipolar voltage: -2.5V...+2.5V, -5V... 12 bits at +5V (signed)Input Type: DifferentialCommon-mode input range: The signal voltage plus the common-mode voltage must be within ±12VChannel input resistance: >1MΩ for voltage input, about 250Ω for current inputAnalog Value Conversion Error:Voltage: ±0.5% of full scale typicalCurrent (0mA... 20mA）：±0.5%Current (4mA... 20mA）：±0.7%Maximum: at 0°C... +60°C or ±2% of full scale with EMIInput filter time constant: 300μs for both voltage and current inputsAnalog-to-digital conversion time: 500μs typical per channelUnused Input: Open-circuitable and should be configured as "Unused"Input data length: 8 bytesOvervoltage protection: Voltage input only, up to 30V DCMaximum cable length (conductor cross-sectional area > 0.14mm²): 10m for unshielded wires and 100m for shielded wiresDimensions: Length 135mm, width 34mm, height 74mmWeight: Net weight 0.12kg, gross weight 0.16kgDegree of protection: IP20 housingOperating temperature: 0°C... +60°CStorage temperature: -40°C... +70°C

The ABB AI562 is an analog input module of the AC500-eCo series for RTD temperature measurementSupply voltage: 24V DC, permissible voltage range - 15% to + 20%.Power Consumption: The current drawn from a 24V DC supply is approximately 5mA, with an inrush current of 0.05A²s at start-up and a maximum ripple of 5%.Reverse Voltage Protection: Yes.Maximum power consumption in the module: 1.1W.Mounting position: horizontal or vertical, operating temperature range from 0°C to +60°C when installed horizontally, reduced output load to 50% per bank when installed vertically, and operating temperature range from 0°C to +40°C.Cooling method: natural convection cooling, which cannot be obstructed by cable ducts or other components in the control cabinet.Number and type of input channels: 2 configurable RTD channels.Channel grouping: 1 group of 2 channels each.Resolution: RTD of 0.1°C/0.1°F, resistance of 15 bits + sign bits.Input Type: Modular Ground Reference RTD for 2-Wire and 3-Wire RTD Temperature Detectors.Input range: support PT100, PT1000, NI100, NI1000, 150Ω, 300Ω, etc.Module update time: less than 1s for all channels.Channel input resistance: >100kΩ.Input filter attenuation: -3dB at 3.6kHz.Analog Value Conversion Error: Typical values depend on the RTD and are up to ±0.6% of full scale at 25°C and up to ±2% of full scale at 0°C to 60°C or electromagnetic interference.A/D conversion time: 140ms typical per channel.Unused Input: Openable and should be configured as Unused.Input data length: 4 bytes.Sensor internal power consumption: 1mW max.Interference suppression: can be carried out upon request.Maximum input voltage: 30V DC at the detection end and 5V DC at the source side.Basic error (resistance): 0.1% of full scale.Repeatability: 0.05% of full scale.Overvoltage Protection: Yes, up to 30V DC.Wire loop resistance: 800hPa/

Number of input points: 4 analog input channels.Input Type: Configurable as a voltage or current input.Input Range:Voltages: -10V to +10V, -5V to +5V, 0V to +10V.Current: -20mA to +20mA, -10mA to +10mA, 0mA to +20mA, 4mA to 20mA.Resolution:Voltage input: 14 bits with signed bits (bipolar) or 15 bits (unipolar).Current input: 14 bits with signed bits (bipolar) or 15 bits (unipolar).Precision:Typical: Approximately ±0.1% of full scale at voltage input; At current input, it is approximately ±0.1% of full scale.Maximum: Approximately ±0.2% of full scale at voltage or current input.Supply voltage: 24V DC, allowable voltage range from 20.4V to 28.8V.Power Consumption: The current drawn from a 24V DC power supply is approximately 10mAOperating temperature: 0°C to +60°C.Storage temperature: -40°C to +70°C.Relative humidity: 0 to 9 Degree of protection: IP20.Channel isolation: There is a certain electrical isolation between channels to reduce interference between channels.Anti-interference ability: It has a certain anti-interference ability to electromagnetic interference to ensure stable operation in industrial environments.Input Signal Conditioning: With input signal conditioning, the input analog signal can be properly conditioned to meet the needs of measurement and control.5% RH, non-condensing.

Number of input points: 4 analog input channels.Input Type: Configurable as a voltage or current input.Input Range:Voltages: -10V to +10V, -5V to +5V, 0V to +10V.Current: -20mA to +20mA, -10mA to +10mA, 0mA to +20mA, 4mA to 20mA.Resolution:Voltage input: 14 bits with signed bits (bipolar) or 15 bits (unipolar).Current input: 14 bits with signed bits (bipolar) or 15 bits (unipolar).Precision:Typical: Approximately ±0.1% of full scale at voltage input; At current input, it is approximately ±0.1% of full scale.Maximum: Approximately ±0.2% of full scale at voltage or current input.Supply voltage: 24V DC, allowable voltage range from 20.4V to 28.8V.Power Consumption: The current drawn from a 24V DC power supply is approximately 10mAOperating temperature: 0°C to +60°C.Storage temperature: -40°C to +70°C.Relative humidity: 0 to 9 Degree of protection: IP20.Channel isolation: There is a certain electrical isolation between channels to reduce interference between channels.Anti-interference ability: It has a certain anti-interference ability to electromagnetic interference to ensure stable operation in industrial environments.Input Signal Conditioning: With input signal conditioning, the input analog signal can be properly conditioned to meet the needs of measurement and control.5% RH, non-condensing.

Analog I/O modulesAnalog inputs: 4 channels, signal type is voltage (U), current (I)Analog outputs: 2 channels, signal type is voltage (U), current (I)Resolution: 12-bitConnection Type: PluggableDegree of protection: IP20Operating ambient temperature: 0°C to +60°CStorage ambient temperature: -40°C to +70°C

The ABB DC562 is the S500-eCo digital input/output moduleNumber and type of input points: 16 configurable digital input points, available as source or drain inputs, with input voltage type DC.Input Current: 5mA typical.Maximum input voltage: 0-30V.Delay time: 8ms typical.Number and type of output points: 16 transistor output points.Output voltage type: DC.Output current: 0.5A max per point, 4A max for all channels combined.Output voltage range: 20.4-28.8V.Power supply voltage: 20.4-28.8V DC.Power Consumption: The current drawn from a 24V DC power supply is approximately 10mA.Connection Type: Pluggable.Degree of protection: IP20.

Number of input points: 8 digital input channels, i.e. 8DI15.Input voltage: 24VDCWiring: PCB terminal blocks with 9-position screw wiring for easy electrical connection5Operating Temperature: Typically within the ambient temperature range of -20°C to 60°C, some special models can accommodate a wider temperature range.Humidity: Relative humidity between 5% and 95%, non-condensing.Protection level: Generally in line with the IP20 protection level standard, it can prevent dust and foreign objects from entering to a certain extent.

The DI562 is ABB's S500-eCo series of digital input modulesNumber of input points: 16 digital input channels3.Input voltage type: AC/DC.Rated input voltage: 24V DC35.Input current: Approximately 2mA per input, with a maximum input current of 5mA.Input impedance: 10kΩ.Maximum input voltage: 0V to 30V.Latency: 8 to 8ms.Response time:

The DI571 is a digital input module with 8 digital input channels and input voltages ranging from 100V AC to 240V ACIsolation characteristics: Galvanic isolation between the channels and the rest of the module, the number of isolation groups is 8, 1 channel per groupPower Consumption: The current consumption from a 24V DC power supply is approximately 10mWeight: Approx. 135g1.Installation position: It can be installed horizontally or vertically, and the natural convection cooling cannot be obstructed by the cable tray or other components in the control cabinet.Input Voltage Range: 0V AC to 264V AC (47Hz to 63Hz)Input current: 6mA (159V AC, 50Hz) per channel at 25°C typical; >7mA（159V AC，60Hz）Input type: Type 1 according to EN 61131-2Signal range: Signal 0(max.) is 20V AC; 20V AC < U < 79V AC for Undefined signal, 79V AC for Signal 1 (min.) Input Delay: 15ms typical for Signal 0 -> 1; Signal 1 -> 0 typically has a value of 30ms1.Maximum permissible leakage current: 1mA with 2-wire proximity switchMaximum cable length: 500m for shielded cables and 300m for unshielded cablesEach channel has 1 yellow LED that lights up when the input signal is high (signal 1).With terminal strip wiring, there are many types of terminal blocks to choose from, such as TA563-9, TA563-11, TA564-9, TA564-11, TA565-9, TA565-11, etcFollowing the environmental conditions in the AC500-eCo system data, the operating temperature range is typically 0°C to +60°C; Storage temperature range from -40°C to +70°C; Relative humidity of 0 to 95% RH and non-condensing

Number of input points: 16 digital input channels1.Input Voltage Type: AC, input voltage range from 100V AC to 240V AC1.Input current: Typically between 7mA (159V AC, 60Hz) per channel4.Input type: Type 14 according to EN 61131-2.Signal range: Signal 0(max.) is 20V AC; Undefined signal is 20V AC < U < 79V AC, and signal 1 (min.) is 79V AC4. Input Delay: 15ms typical for Signal 0 -> 1; Signal 1 -> 0 typically has a 30ms4.Isolation characteristics: Channels are galvanically isolated from the rest of the module, with 16 isolation groups of 1 channel each.Power Consumption: The current consumption from a 24V DC power supply is approximately 15mA.Connection Type: Pluggable.Degree of protection: IP204.Operating temperature: 0°C to +60°C; Storage temperature - 40 ° C to + 70 ° C.Humidity: 0 to 95% RH, non-condensing.Vibration resistance: 0.5g rms, 10 to 500Hz.Shock resistance: 15g, 11ms half sinusoid.Each channel has 1 yellow LED that lights up when the input signal is high (signal 1).

Number of output points: 8 digital output channels.Output Type: Relay output.Output Voltage:Maximum switching voltage: AC 250V or DC 30V.Rated operating voltage: AC 24V or DC 24V.Output Current:Current rating per point: AC 2A or DC 2A.Maximum current per point: AC 3A or DC 3A.Common Side Maximum Current: AC 8A or DC 8A.Power consumption: The current drawn from a 24V DC power supply is approximately 20mA.Operating temperature: -20°C to +60°C.Storage temperature: -40°C to +70°C.Relative humidity: 5% to 95%, non-condensing.Degree of protection: IP20.Switching frequency: typically between 1Hz and 10Hz, depending on the type and size of the load.Action time: The turn-on time and turn-off time are generally around 10ms to 20ms.Overload Protection: With overload protection function, when the output current exceeds the rated value, the protection mechanism will be triggered to prevent damage to the module and load.Short-circuit protection: It can withstand short-circuit conditions to a certain extent and avoid equipment damage caused by short-circuit, but continuous short-circuit may affect the life of the module.

Number of output points: 16 digital output channels, 3 transistor outputs.Output Voltage: Rated operating voltage is 24V DC3.Output Current: 0.5A maximum current per point, common side maximum current not mentionedPower Consumption: The current drawn from a 24V DC supply is approximately 10mA; The current consumption through the UP terminals is 20mA + 0.5A3 max per output.Isolation feature: Electrical isolation between the output group and the rest of the moduleOperating temperature: typically 0°C to +60°C; The storage temperature range is -40°C to +70°C.Relative humidity: 0 to 95% RH, non-condensing.Degree of protection: IP20.Installation position: Can be installed horizontally or vertically, natural convection cooling cannot be obstructed by cable trays or other components in the control cabinet3.Vibration resistance: 0.5g rms, 10 to 500Hz.Shock resistance: 15g, 11ms half sinusoid.

Number of output points: 16 digital output channels, 3 transistor outputs.Output Voltage: Rated operating voltage is 24V DC3.Output Current: 0.5A maximum current per point, common side maximum current not mentionedPower Consumption: The current drawn from a 24V DC supply is approximately 10mA; The current consumption through the UP terminals is 20mA + 0.5A3 max per output.Isolation feature: Electrical isolation between the output group and the rest of the moduleOperating temperature: typically 0°C to +60°C; The storage temperature range is -40°C to +70°C.Relative humidity: 0 to 95% RH, non-condensing.Degree of protection: IP20.Installation position: Can be installed horizontally or vertically, natural convection cooling cannot be obstructed by cable trays or other components in the control cabinet3.Vibration resistance: 0.5g rms, 10 to 500Hz.Shock resistance: 15g, 11ms half sinusoid.

Number of output points and type: 8 thyristor outputs: 245.Output current: 0.3A245 maximum per channel.Output Voltage: Typically operating voltage is 24V DC8.Power Consumption: The current consumption from a 24V DC power supply is approximately 30mA.Operating temperature: typically 0°C to +60°C; The storage temperature range is -40°C to +70°C.Relative humidity: 0 to 95% RH, non-condensing.Degree of protection: IP20.Isolation feature: Electrical isolation between the output group and the rest of the module.Vibration resistance: 0.5g rms, 10 to 500Hz.Shock resistance: 15g, 11ms half sinusoid.

The DO573 is a digital output module from ABB's AC500-eCo seriesNumber of output points and type: 8 normally open relay output channels 4.Output Voltage: Rated at 24V DC or 120/240V AC.Output current: 2A4 maximum per point.Power consumption: If it is AC power supply, the voltage range is between 100VAC~260V, and the current consumption is about 30mA; If it is DC power supply, the supply voltage range is 18~28V, and the typical current value is 50mA at 24VOperating temperature: typically -40°C to +70°C.Relative humidity: It has good resistance in high humidity environment.Ingress Protection: Not explicitly mentioned, but generally has some protection against dust, solid foreign objects, and splashes, and may be IP20 or similarIsolation feature: Electrical isolation between the output group and the rest of the module.Anti-vibration: It has a certain anti-vibration ability and can work stably in a vibration environment, and the specific value is not clearly given.Shock resistance: Able to withstand a certain amount of impact to ensure that there will be no failure or damage when subjected to impact, the specific value is not clearly given.

Number of input points and type: 8 digital input points, which can be used as source or drain inputs, and the input voltage type is DC.Input Current: 5mA typical.Maximum input voltage: 0-30V.Delay time: 8ms typical.Number and type of output points: 8 transistor output points.Output voltage type: DC.Output voltage: 24V.Output current: 0.5A max per point, 4A max for all channels combinedPower supply voltage: 20.4-28.8V DC.Power Consumption: The current drawn from a 24V DC power supply is approximately 10mA.Operating temperature: 0-+60°C.Storage temperature: -40-+70°C.Degree of protection: IP20.

Number of input points and type: 8 digital input points, which can be used as source or drain inputs, and the input voltage type is DC.Input Current: 5mA typical.Maximum input voltage: 0-30V.Delay time: 8ms typical.Number and type of output points: 8 relay output points5.Output Voltage: Rated at 24V DC or 120/240V AC.Output current: 2A5 maximum per pointPower supply voltage: 20.4-28.8V DC.Power Consumption: The current drawn from a 24V DC power supply is approximately 10mA.Operating temperature: 0-+60°C.Storage temperature: -40-+70°C.Degree of protection: IP20.

The MC5102 is a memory card for ABB's AC500 series PLCsMemory capacity: 8GB.Memory type: Flash EEPROM, non-volatile, data is not lost after a power failure, and user programs and data can be reliably stored for long periods of time.IP20 protection level for a certain degree of protection against dust and foreign objects.

Operating temperature: -20°C to 60°C2.Degree of protection: IP20.Memory: It has 1008KB of RAM memory, of which 256KB can be used for user program code and data.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: There are 6 digital input points of 24V DC.Digital outputs: There are 4 relay-type digital output points.Ethernet interface: 1 industrial Ethernet interface, supporting a variety of standard communication protocols, convenient for seamless connection with other devices.Other interfaces: No RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.

Processing speed: The controller processing time is 0.0002ms.Memory: It has 1008KB of RAM memory, of which 256KB can be used for user program code and data.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: There are 6 digital input points of 24V DC.Digital outputs: There are 4 transistor-type digital output points of 24V DC.Ethernet interface: 1 industrial Ethernet interface that supports multiple standard communication protocols, such as Ethernet, TCP/IP, Modbus, etc., for seamless connection with other devices2.Other interfaces: No RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.Operating temperature: -20°C to 60°C2.Degree of protection: IP20.

Memory: 5032KB, memory type is RAM.Processing speed: The controller processing time is 0.00002ms.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 6 relay-type digital output points, 2 configurable digital I/O points, relay output rated at 2A, configurable output rated at 0.5A.Ethernet interface: 1 industrial Ethernet interface, no RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.Option slots: 2.Degree of protection: IP20.

Memory: Has 5032KB of RAM memory.Processing speed: The controller processing time is 0.00002ms.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: There are 12 digital input points of 24V DC.Digital outputs: There are 8 24V DC, 0.5A transistor-based digital output points, plus 2 configurable digital I/O points.Ethernet interface: 1 industrial Ethernet interface, supporting a variety of standard communication protocols, convenient for seamless connection with other devices.Other interfaces: No RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.Degree of protection: IP20.

Memory: 4MB, memory type is RAM, actual usable memory is 7032KB.Processing speed: The controller processing time is 0.00002ms.Supply voltage: The rated voltage is DC 24V, and the supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 6 relay-type digital output points, 2 configurable digital I/O points, relay output rated at 2A, configurable output rated at 0.5A.Ethernet interface: 1 industrial Ethernet interface, no RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.Degree of protection: IP20.Option slots: 3.

Memory: Has 7032KB of RAM memory.Processing speed: The controller processing time is 0.00002ms.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 8 24V DC, 0.5A transistor digital output points, plus 2 configurable digital I/O points.Ethernet interface: 1 industrial Ethernet interface, no RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.Option slots: 2.Degree of protection: IP20.

Memory: 8MB, memory type is RAM, actual usable memory is 9100KB.Processing speed: The controller processing time is 0.00002ms.Supply voltage: The rated voltage is DC 24V, and the supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 8 x 24V DC, 0.5A transistor digital outputs, 2 configurable digital I/O points.Ethernet interfaces: 2 industrial Ethernet interfaces, no RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.Degree of protection: IP20.Option slots: 3.

Memory: 8MB, the memory type is RAM, and the actual usable memory is about 9100KB.Processing speed: The controller processing time is 0.00002ms.Supply voltage: The rated voltage is DC 24V, and the supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 8 x 24V DC, 0.5A transistor digital outputs, 2 configurable digital I/O points.Ethernet interfaces: 2 industrial Ethernet interfaces, no RS-232, RS-422, RS-485, USB, wireless, parallel, serial TTY, etc.Degree of protection: IP20.Option slots: 3.

Number of input points: 4 numeric input points.Input voltage: Typically 24V DC.Input Current: The typical input current is low, generally in the milliampere level, and the typical input current at each input point is about 3mA.Input Delay: The input signal has a short delay time, usually in the microsecond range, typically around 200μs, which can quickly respond to changes in the input signal.Bus interface: The I/O bus interface of the AC500 series is used to carry out high-speed data transmission and communication with the main controller to ensure the stable connection and data interaction between the module and the system.The electrical isolation technology is used between the input channel and the internal circuit, and the isolation voltage can generally reach 1500V AC, which effectively prevents the influence of external interference signals on the internal circuit of the module and improves the stability and reliability of the system.Operating temperature: Usually it can work well in the range of -25°C to +60°C, in some special requirements of the environment, there may be a wider or narrower temperature range.Relative humidity: Generally within the range of 5% to 95% relative humidity, but condensation is not allowed.Degree of protection: Generally IP20, it can meet the protection requirements of most industrial sites, but additional protection measures may be required in harsh environments.The module is designed for ABB AC500 series PLCs and has good compatibility with other modules and master controllers of the AC500 series, making it easy to form a complete automation control system.

Number of output points: 4 digital output points1.Output type: Usually transistor output, can be switched on and off quickly, suitable for applications that require high-frequency output.Output Voltage: The operating voltage range is generally 12V to 220V1.Output current: The output current of each output point can generally reach about 0.5A, which can directly drive small loads, such as relays, indicator lights, etc.Bus interface: The I/O bus interface of the AC500 series ensures high-speed and stable data transmission and communication with the main controller.The electrical isolation technology is used between the output channel and the internal circuit, and the isolation voltage can generally reach 1500V AC, which effectively prevents the influence of external interference signals on the internal circuit of the module and improves the stability and reliability of the system.Operating Temperature: Typically works in the range of -25°C to +60°C.Relative humidity: Generally within the range of 5% to 95% relative humidity, but condensation is not allowed.Degree of protection: Generally IP20, it can meet the protection requirements of most industrial sites, but additional protection measures may be required in harsh environments.It has an output status indicator, which can intuitively display the current status of each output point, which is convenient for on-site debugging and troubleshooting.It supports online diagnosis function, which can monitor the working status of the output channel in real time, and timely find and report fault conditions such as abnormal output signals, short circuits, and open circuits.The module is designed for ABB AC500 series PLCs and has good compatibility with other modules and master controllers of the AC500 series, making it easy to form a complete automation control system.

Number of input points: Has 2 numeric input points.Input voltage: Generally 24V DC, standard 24V DC input signal is acceptable.Input Current: The input current is small, typically around a few milliamps, to ensure a good fit with commonly used 24V DC power supplies and sensors.Input Delay: The response time of the input signal is usually in the microsecond range, such as tens to hundreds of microseconds, which can quickly detect changes in the input signal.Number of output points: Contains 2 digital output points.Output type: The output type is usually transistor output, which is suitable for application scenarios that require high-speed switching action, and its switching speed is fast.Output voltage: The operating voltage range generally covers a wide range, such as 12V to 24V DC, which can be flexibly configured according to actual usage.Output current: The rated current of each output point is usually around 0.5A, which can drive some small loads, such as small relays, indicator lights, solenoid valves, etcInterface type: The I/O bus interface matching the ABB AC500 series is used to ensure a reliable connection between the module and the main controller, and to achieve high-speed and stable data transmission.Isolation voltage: There may be a high galvanic isolation voltage between the input and output channels and the internal circuitry, such as 1500V AC, to prevent external electrical interference and ensure the safety and stability of the module.Operating temperature range: typically between -25°C and +60°C, able to accommodate the temperature conditions of most industrial environments.Relative humidity range: It can generally operate normally at a relative humidity of 5% to 95%, but condensation is not allowed to avoid short circuits or other electrical faults in the internal circuitry.Rating: Typically IP20, it protects against larger objects such as fingers for most industrial site installations, but protection against dust and moisture is relatively limited and may require additional protection in harsh environments.Status indicator: With input and output status indicators, it is convenient for users to intuitively check the status of the input signal and the activation of the output signal, which is convenient for on-site debugging and troubleshooting.Diagnostic function: It has certain online diagnosis capabilities, which can detect and report abnormal conditions in the input and output channels, such as input signal loss, output short circuit or open circuit and other faults.Mainly designed for ABB AC500 series PLC, it has good compatibility with the main controller and other modules of this series, and can be seamlessly integrated into the ABB AC500 series automation control system to jointly realize various industrial automation control tasks.

Number of input points: 2 analog input points1.Input Type: Voltage and current signals can be received, support 0V... 10V、0mA... 20mA、4mA... 20mA and other input range configurations1.Resolution: 12 bits, providing more accurate analogue measurements1.The module adopts galvanic isolation technology, and the isolation voltage is generally high, which can effectively prevent the influence of external interference signals on the internal circuit of the module, and improve the stability and reliability of the system1.Operating Temperature: Typically works in the range of -25°C to +60°C.Relative humidity: Generally within the range of 5% to 95% relative humidity, but condensation is not allowed.Degree of protection: Generally IP20, it can meet the protection requirements of most industrial sites, but additional protection measures may be required in harsh environments.It has an input status indicator that visually displays the current status of each input point, facilitating on-site commissioning and troubleshooting1.It supports online diagnosis function, which can monitor the working status of the input channel in real time, and timely find and report abnormal input signals, short circuits, open circuits and other faults.The module is designed for ABB's AC500-eCo V3 series CPU modules, and has good compatibility with other modules and master controllers of the AC500-eCo V3 series, making it easy to form a complete automation control system