Environmentally friendly material: made of plastic polyurethane material, in line with ROHS environmental protection requirements.High elasticity: small bending radius allows it to pass through tight spaces.Anti-knotting: Compared with other plastic pipes, it has a better anti-knot effect.Excellent plasticity: Withstands repeated stretching.Anti-abrasion: suitable for abrasion-prone environment, long service life.Low gas permeability: Reduces leakage and contamination problems.Good solubility resistance: no solvent will leak out, no pollution to the environment.Low compressibility: It can maintain excellent physical properties.Applicable to a wide range of media: suitable for air, water and other media.

Environmentally friendly material: made of plastic polyurethane material, in line with ROHS environmental protection requirements.High elasticity: small bending radius allows it to pass through tight spaces.Anti-knotting: Compared with other plastic pipes, it has a better anti-knot effect.Excellent plasticity: Withstands repeated stretching.Anti-abrasion: suitable for abrasion-prone environment, long service life.Low gas permeability: Reduces leakage and contamination problems.Good solubility resistance: no solvent will leak out, no pollution to the environment.Low compressibility: It can maintain excellent physical properties.Applicable to a wide range of media: suitable for air, water and other media.

Excellent material: It is made of brass, which has good corrosion resistance and strength, and can adapt to a variety of working environments to ensure the durability and reliability of the product.Convenient connection: It is a type of push-in joint, which can be quickly inserted into the joint without using tools during installation, so as to achieve quick connection, improve installation efficiency, and save time and labor costs.Reliable sealing: It has good sealing, which can ensure that gas or liquid does not leak under a certain pressure, and ensure the stability and normal operation of the system. At the same time, it will not loosen after multiple matings, and can maintain reliable connection and sealing performance for long-term use.Specification adaptation: The pipe diameter is φ8, suitable for the outer diameter of 8mm tubing, this clear specification design can meet the connection needs of specific pipe diameter tubing, and is compatible with a variety of pneumatic equipment and systems.Wide range of application: It is suitable for the pneumatic connection of all pneumatic machines or machine tools, and has a wide range of application scenarios in various pneumatic systems, and can be used to connect pneumatic components such as cylinders and solenoid valves to realize gas transmission and control.

Clear specifications: It is a quick-plug pneumatic joint for intubation, which is suitable for 8mm tubing and can meet the connection needs of specific diameter trachea.Excellent material: made of plastic, with the characteristics of light weight and corrosion resistance, suitable for a variety of working environments, can be exposed to air, water and other media, the applicable temperature range is generally -20°C to 60°C, and the pressure resistance can reach 0.8MPa.Convenient connection: quick installation, simple and dexterous, no tools can be used to quickly connect and separate the air pipe and joint, which can effectively improve the installation and maintenance efficiency, save time and labor costs.Good flowability: The flow performance is superior, and the flow rate with the same capacity as the inner diameter of the air tube can ensure the smooth transmission of gas or liquid in the pipeline and reduce pressure loss.Reliable sealing: the threaded part is coated with sealant, and the M5 metric thread is fitted with a sealing gasket to ensure that the threaded connection part is leak-free; The connection part with the air pipe is safe, reliable and durable, which can effectively prevent the leakage of the medium and ensure the stability of the system.Lightweight: The small size of the product is not only space-saving, but also lightweight and beautiful, which is easy to install and layout in various equipment and systems.

Installation convenience: As a straight-through joint with a feed-through, its design is easy to install on panels or other structures, which can realize the rapid connection and penetration of the air pipe between different spaces or components, save installation space and time, and make the pipeline layout of the pneumatic system more neat and reasonable.Exterior design: Products usually have a concise appearance that matches the overall style of various pneumatic equipment and systems, which is both aesthetically pleasing and functional. At the same time, the compact form factor design also facilitates efficient tubing connections in limited spaces.Product reliability: As a professional pneumatic equipment manufacturer, AirTAC has a strict quality control system, and PM8 joints have undergone multiple processes and strict testing in the production process to ensure that the quality and performance of the products are stable and reliable, and can work stably for a long time, reducing system downtime and maintenance costs caused by joint failure.Good interchangeability: In AirTAC's product system, the size and connection method of PM8 connectors follow industry standards and AirTAC's own specifications, and have good interchangeability. This means that when the system is maintained or upgraded, it can be easily replaced with other AirTAC couplings of the same specification or compatible third-party connectors, improving the maintainability and flexibility of the system.

Excellent material: It is made of brass, which has good corrosion resistance and strength, and can adapt to a variety of working environments to ensure the durability and reliability of the product.Convenient connection: It is a type of push-in joint, which can be quickly inserted into the joint without using tools during installation, so as to achieve quick connection, improve installation efficiency, and save time and labor costs.Reliable sealing: It has good sealing, which can ensure that gas or liquid does not leak under a certain pressure, and ensure the stability and normal operation of the system. At the same time, it will not loosen after multiple matings, and can maintain reliable connection and sealing performance for long-term use.Specification adaptation: The pipe diameter is φ8, suitable for the outer diameter of 8mm tubing, this clear specification design can meet the connection needs of specific pipe diameter tubing, and is compatible with a variety of pneumatic equipment and systems.Wide range of application: It is suitable for the pneumatic connection of all pneumatic machines or machine tools, and has a wide range of application scenarios in various pneumatic systems, and can be used to connect pneumatic components such as cylinders and solenoid valves to realize gas transmission and control.

Stable connection: The threaded connection method is adopted, the connection is tight and stable, which can effectively prevent the joint from loosening during use, ensure the tightness and stability of the system, and can withstand a certain pressure without leakage.Excellent material: usually nickel-plated copper body material, this material has good corrosion resistance and pollution resistance, can adapt to a variety of working environments, is not easy to rust and be corroded, can ensure the normal use and long service life of the joint, but also can avoid pollution to the pneumatic system due to material problems.Specification adaptation: The "12" in PG12 - 8 means that one end of the joint is suitable for the outer diameter of the 12mm tube, and the "8" means that the other end is suitable for the outer diameter of the 8mm tube, this variable diameter design can easily connect the different diameter of the tube, improve the versatility and adaptability of the joint, and is widely used in all kinds of pneumatic systems.Good flowability: The flow performance is superior, and the flow rate with the same capacity as the inner diameter of the gas pipe can ensure the smooth transmission of gas in the pipeline, reduce pressure loss, and ensure the working efficiency of the pneumatic system.

Specification adaptation: The thread specification is M5 and the pipe diameter is φ4mm, which allows it to be matched with specific pneumatic components and tubing to meet the connection needs of a variety of pneumatic systems.Excellent material: Usually made of nickel-plated copper, it has good corrosion resistance and strength, can adapt to different working environments, ensures the durability and reliability of the product, and can avoid affecting the normal operation of the pneumatic system due to rust or corrosion.Reliable connection: The external thread connection mode makes the connection between the joint and other components tight and stable, which can effectively prevent loosening and leakage, ensure the tightness and stability of the pneumatic system, and can withstand a certain working pressure without gas leakage.Convenient installation: The structure design is reasonable, the installation process is relatively simple, no need for complex tools and special skills, the installation can be completed quickly, the work efficiency is improved, and the installation time and labor cost are saved. At the same time, it can be easily disassembled when it needs to be repaired or replaced.Compact appearance: The L-shaped design saves installation space, and the appearance is light and beautiful, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume or unreasonable shape of the joint.

Specification adaptation: The thread specification is M5 and the pipe diameter is φ4mm, which allows it to be matched with specific pneumatic components and tubing to meet the connection needs of a variety of pneumatic systems.Excellent material: Usually made of nickel-plated copper, it has good corrosion resistance and strength, can adapt to different working environments, ensures the durability and reliability of the product, and can avoid affecting the normal operation of the pneumatic system due to rust or corrosion.Reliable connection: The external thread connection mode makes the connection between the joint and other components tight and stable, which can effectively prevent loosening and leakage, ensure the tightness and stability of the pneumatic system, and can withstand a certain working pressure without gas leakage.Convenient installation: The structure design is reasonable, the installation process is relatively simple, no need for complex tools and special skills, the installation can be completed quickly, the work efficiency is improved, and the installation time and labor cost are saved. At the same time, it can be easily disassembled when it needs to be repaired or replaced.Compact appearance: The L-shaped design saves installation space, and the appearance is light and beautiful, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume or unreasonable shape of the joint.

Specification adaptation: The thread specification is M5 and the pipe diameter is φ4mm, which allows it to be matched with specific pneumatic components and tubing to meet the connection needs of a variety of pneumatic systems.Excellent material: Usually made of nickel-plated copper, it has good corrosion resistance and strength, can adapt to different working environments, ensures the durability and reliability of the product, and can avoid affecting the normal operation of the pneumatic system due to rust or corrosion.Reliable connection: The external thread connection mode makes the connection between the joint and other components tight and stable, which can effectively prevent loosening and leakage, ensure the tightness and stability of the pneumatic system, and can withstand a certain working pressure without gas leakage.Convenient installation: The structure design is reasonable, the installation process is relatively simple, no need for complex tools and special skills, the installation can be completed quickly, the work efficiency is improved, and the installation time and labor cost are saved. At the same time, it can be easily disassembled when it needs to be repaired or replaced.Compact appearance: The L-shaped design saves installation space, and the appearance is light and beautiful, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume or unreasonable shape of the joint.

Specification adaptation: The thread specification is M5 and the pipe diameter is φ4mm, which allows it to be matched with specific pneumatic components and tubing to meet the connection needs of a variety of pneumatic systems.Excellent material: Usually made of nickel-plated copper, it has good corrosion resistance and strength, can adapt to different working environments, ensures the durability and reliability of the product, and can avoid affecting the normal operation of the pneumatic system due to rust or corrosion.Reliable connection: The external thread connection mode makes the connection between the joint and other components tight and stable, which can effectively prevent loosening and leakage, ensure the tightness and stability of the pneumatic system, and can withstand a certain working pressure without gas leakage.Convenient installation: The structure design is reasonable, the installation process is relatively simple, no need for complex tools and special skills, the installation can be completed quickly, the work efficiency is improved, and the installation time and labor cost are saved. At the same time, it can be easily disassembled when it needs to be repaired or replaced.Compact appearance: The L-shaped design saves installation space, and the appearance is light and beautiful, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume or unreasonable shape of the joint.

Environmentally friendly material: made of plastic polyurethane material, in line with ROHS environmental protection requirements.High elasticity: small bending radius allows it to pass through tight spaces.Anti-knotting: Compared with other plastic pipes, it has a better anti-knot effect.Excellent plasticity: Withstands repeated stretching.Anti-abrasion: suitable for abrasion-prone environment, long service life.Low gas permeability: Reduces leakage and contamination problems.Good solubility resistance: no solvent will leak out, no pollution to the environment.Low compressibility: It can maintain excellent physical properties.Applicable to a wide range of media: suitable for air, water and other media.

Connection: Threaded connection, can be closely connected with pneumatic components or pipelines with corresponding internal threads, stable connection and good sealing performance, can effectively prevent gas leakage, and ensure the stability of the pneumatic system.Material characteristics: Usually the main body is made of nickel-plated copper, which has good corrosion resistance and strength. On the one hand, it can adapt to a variety of complex working environments, is not easy to rust and corrode, and prolongs the service life of joints; On the other hand, it ensures that the joint will not be deformed or damaged when subjected to a certain pressure, ensuring the safe operation of the system.Specification size: Adapt to a specific diameter of the tubing, the "4" in PC4 - 01 generally means to fit the tubing with an outer diameter of 4mm, this clear specification design makes it able to accurately meet the requirements of the corresponding pneumatic system for the tubing connection, and has good compatibility with a variety of small pneumatic equipment and components.Easy installation: As a push-in fitting, the installation process does not require the use of complex tools, only need to accurately insert the air pipe into the joint, and the connection can be quickly realized, which greatly improves the installation efficiency and saves time and labor costs. At the same time, when the parts need to be repaired or replaced, the air pipe can also be easily pulled out, which is convenient for the maintenance and upgrade of the system.Shape design: The product is compact and lightweight, which not only saves installation space, but also is beautiful and practical, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint.

Connection: Threaded connection, can be closely connected with pneumatic components or pipelines with corresponding internal threads, stable connection and good sealing performance, can effectively prevent gas leakage, and ensure the stability of the pneumatic system.Material characteristics: Usually the main body is made of nickel-plated copper, which has good corrosion resistance and strength. On the one hand, it can adapt to a variety of complex working environments, is not easy to rust and corrode, and prolongs the service life of joints; On the other hand, it ensures that the joint will not be deformed or damaged when subjected to a certain pressure, ensuring the safe operation of the system.Specification size: Adapt to a specific diameter of the tubing, the "4" in PC4 - 01 generally means to fit the tubing with an outer diameter of 4mm, this clear specification design makes it able to accurately meet the requirements of the corresponding pneumatic system for the tubing connection, and has good compatibility with a variety of small pneumatic equipment and components.Easy installation: As a push-in fitting, the installation process does not require the use of complex tools, only need to accurately insert the air pipe into the joint, and the connection can be quickly realized, which greatly improves the installation efficiency and saves time and labor costs. At the same time, when the parts need to be repaired or replaced, the air pipe can also be easily pulled out, which is convenient for the maintenance and upgrade of the system.Shape design: The product is compact and lightweight, which not only saves installation space, but also is beautiful and practical, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint.

Easy connection: It is a quick-insert connector, which can be quickly connected with 6mm pneumatic hose, convenient installation and disassembly, which can save installation time and labor cost.Good material: usually made of copper, with good corrosion resistance and strength, can withstand a certain working pressure, to ensure stable work in the pneumatic system. Reliable sealing: The reliable sealing structure can effectively prevent gas leakage, ensure the normal operation of the pneumatic system, and reduce the energy loss and system failure caused by leakage. Strong versatility: As a common pneumatic joint model, PC8-02 has good versatility and can be used with a variety of brands and types of pneumatic components, which is easy to integrate and replace in different pneumatic systems.

Easy connection: It is a quick-insert connector, which can be quickly connected with 6mm pneumatic hose, convenient installation and disassembly, which can save installation time and labor cost.Good material: usually made of copper, with good corrosion resistance and strength, can withstand a certain working pressure, to ensure stable work in the pneumatic system. Reliable sealing: The reliable sealing structure can effectively prevent gas leakage, ensure the normal operation of the pneumatic system, and reduce the energy loss and system failure caused by leakage. Strong versatility: As a common pneumatic joint model, PC8-02 has good versatility and can be used with a variety of brands and types of pneumatic components, which is easy to integrate and replace in different pneumatic systems.

Stable connection: The threaded connection method is adopted, the connection is tight and stable, which can effectively prevent the joint from loosening during use, ensure the tightness and stability of the system, and can withstand a certain pressure without leakage.Excellent material: usually nickel-plated copper body material, this material has good corrosion resistance and pollution resistance, can adapt to a variety of working environments, is not easy to rust and be corroded, can ensure the normal use and long service life of the joint, but also can avoid pollution to the pneumatic system due to material problems.Specification adaptation: The "12" in PG12 - 8 means that one end of the joint is suitable for the outer diameter of the 12mm tube, and the "8" means that the other end is suitable for the outer diameter of the 8mm tube, this variable diameter design can easily connect the different diameter of the tube, improve the versatility and adaptability of the joint, and is widely used in all kinds of pneumatic systems.Good flowability: The flow performance is superior, and the flow rate with the same capacity as the inner diameter of the gas pipe can ensure the smooth transmission of gas in the pipeline, reduce pressure loss, and ensure the working efficiency of the pneumatic system.

Specification adaptation: The thread specification is M5 and the pipe diameter is φ4mm, which allows it to be matched with specific pneumatic components and tubing to meet the connection needs of a variety of pneumatic systems.Excellent material: Usually made of nickel-plated copper, it has good corrosion resistance and strength, can adapt to different working environments, ensures the durability and reliability of the product, and can avoid affecting the normal operation of the pneumatic system due to rust or corrosion.Reliable connection: The external thread connection mode makes the connection between the joint and other components tight and stable, which can effectively prevent loosening and leakage, ensure the tightness and stability of the pneumatic system, and can withstand a certain working pressure without gas leakage.Convenient installation: The structure design is reasonable, the installation process is relatively simple, no need for complex tools and special skills, the installation can be completed quickly, the work efficiency is improved, and the installation time and labor cost are saved. At the same time, it can be easily disassembled when it needs to be repaired or replaced.Compact appearance: The L-shaped design saves installation space, and the appearance is light and beautiful, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume or unreasonable shape of the joint.

Various specifications: Belongs to intubation thread class quick insert pneumatic joint, has a variety of sizes, can be widely used in various pneumatic systems, to meet different gas pipe connection needs. Good circulation: excellent flow performance, through the flow with the same capacity as the inner diameter of the gas pipe, can effectively ensure the smooth transmission of gas in the pneumatic system. Easy connection: Plug and plug the nozzle is simple, convenient and fast, and the connection part of the gas pipe is safe, reliable and durable, easy to install and disassemble, which can save time and labor costs. Good sealing: the thread part is coated with sealant, and the metric thread is attached with a sealing gasket to ensure that the threaded connection part has no leakage, which can effectively prevent gas leakage and ensure the normal operation of the pneumatic system. Anti-corrosion: nickel-plated copper body can prevent corrosion and pollution, improve the corrosion resistance and oxidation resistance of the joint, so that its application range is wider, can be used in different environmental conditions.

Easy connection: As a push-in fitting, the tubing can be quickly connected and separated without tools. When installing, you only need to insert the air hose accurately into the fitting, and the connection can be completed quickly; The tubing can also be easily removed when repairing or replacing components, improving installation and maintenance efficiency.Excellent material: usually made of nickel-plated copper or high-quality engineering plastics. Nickel-plated copper material has good corrosion resistance, strength and conductivity, can adapt to a variety of complex working environments, and is not easy to rust and be corroded; Engineering plastics are lightweight, insulating, and low-cost, but also have certain strength and corrosion resistance.Specification adaptation: "6" means to adapt to the trachea with an outer diameter of 6mm, which is designed to be well matched with the trachea and pneumatic components of the corresponding pipe diameter, with strong versatility, and can be widely used in various pneumatic systems to meet the connection needs of different equipment and pipelines.Good sealing: The connection parts of the joint are usually sealed design, such as O-ring sealing, etc., to ensure good sealing and effectively prevent gas leakage. Even under a certain pressure fluctuation, it can maintain a stable sealing effect and ensure the normal operation of the pneumatic system.Reasonable appearance: The T-shaped tee structure is reasonably designed, which can firmly connect the three gas pipes to ensure the smooth transmission of gas in the pipeline. The overall shape is compact and lightweight, which not only saves installation space, but also facilitates the layout and installation in different equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint. Normal operation.

Convenient and fast connection: As a push-in fitting, no tools are required, just insert the air hose alignment joint, and the connection can be quickly realized, which greatly improves the installation efficiency and saves a lot of time and labor costs when the pneumatic system needs to be quickly assembled or repaired.The material is excellent and durable: usually made of nickel-plated copper or high-quality engineering plastics. Nickel-plated copper material has good corrosion resistance, strength and conductivity, can adapt to a variety of complex working environments, and is not easy to rust and be corroded; Engineering plastic material is light weight, good insulation, low cost, but also has a certain strength and corrosion resistance, which can ensure the normal use and long service life of the joint under different conditions.Specification and size adaptation: "12" generally means to adapt to the trachea with an outer diameter of 12mm, which is designed to be well matched with the trachea and pneumatic components of the corresponding diameter, with strong versatility, and can be widely used in various pneumatic systems, which can meet the connection needs of different equipment and pipelines.Good sealing performance: The connection parts of the joint are usually sealed design, such as O-ring sealing, etc., to ensure good sealing and effectively prevent gas leakage. Even under a certain pressure fluctuation, it can maintain a stable sealing effect and ensure the normal operation of the pneumatic system.Reasonable shape design: the overall shape is compact and lightweight, which not only saves installation space, but also facilitates the layout and installation in different equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint. At the same time, its shape design is also conducive to the reasonable layout of pipelines and the smooth flow of airflow.

Easy connection: Push-in design allows for quick connection and separation of the tubing without tools. When installing, just insert the air hose alignment joint and the connection can be completed quickly; The tubing can also be easily removed when repairing or replacing components, improving installation and maintenance efficiency.Excellent material: usually made of nickel-plated copper or high-quality engineering plastics. Nickel-plated copper material has good corrosion resistance, strength and conductivity, can adapt to a variety of complex working environments, and is not easy to rust and be corroded; Engineering plastics are lightweight, insulating, and low-cost, but also have certain strength and corrosion resistance.Specification adaptation: "6" means to adapt to the trachea with an outer diameter of 6mm, which is designed to be well matched with the trachea and pneumatic components of the corresponding pipe diameter, with strong versatility, and can be widely used in various pneumatic systems to meet the connection needs of different equipment and pipelines.Good sealing: The connection parts of the joint are usually sealed design, such as O-ring sealing, etc., to ensure good sealing and effectively prevent gas leakage. Even under a certain pressure fluctuation, it can maintain a stable sealing effect and ensure the normal operation of the pneumatic system.Reasonable appearance: The Y-shaped tee structure is reasonably designed, which can firmly connect the three gas pipes to ensure the smooth transmission of gas in the pipeline. The overall shape is compact and lightweight, which not only saves installation space, but also facilitates the layout and installation in different equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint.

Easy connection: Push-in design allows for quick connection and separation of the tubing without tools. When installing, just insert the air hose alignment joint and the connection can be completed quickly; The tubing can also be easily removed when repairing or replacing components, improving installation and maintenance efficiency.Excellent material: usually made of nickel-plated copper or high-quality engineering plastics. Nickel-plated copper material has good corrosion resistance, strength and conductivity, can adapt to a variety of complex working environments, and is not easy to rust and be corroded; Engineering plastics are lightweight, insulating, and low-cost, but also have certain strength and corrosion resistance.Specification adaptation: "6" means to adapt to the trachea with an outer diameter of 6mm, which is designed to be well matched with the trachea and pneumatic components of the corresponding pipe diameter, with strong versatility, and can be widely used in various pneumatic systems to meet the connection needs of different equipment and pipelines.Good sealing: The connection parts of the joint are usually sealed design, such as O-ring sealing, etc., to ensure good sealing and effectively prevent gas leakage. Even under a certain pressure fluctuation, it can maintain a stable sealing effect and ensure the normal operation of the pneumatic system.Reasonable appearance: The Y-shaped tee structure is reasonably designed, which can firmly connect the three gas pipes to ensure the smooth transmission of gas in the pipeline. The overall shape is compact and lightweight, which not only saves installation space, but also facilitates the layout and installation in different equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint.

Connection: Threaded connection, can be closely connected with pneumatic components or pipelines with corresponding internal threads, stable connection and good sealing performance, can effectively prevent gas leakage, and ensure the stability of the pneumatic system.Material characteristics: Usually the main body is made of nickel-plated copper, which has good corrosion resistance and strength. On the one hand, it can adapt to a variety of complex working environments, is not easy to rust and corrode, and prolongs the service life of joints; On the other hand, it ensures that the joint will not be deformed or damaged when subjected to a certain pressure, ensuring the safe operation of the system.Specification size: Adapt to a specific diameter of the tubing, the "4" in PC4 - 01 generally means to fit the tubing with an outer diameter of 4mm, this clear specification design makes it able to accurately meet the requirements of the corresponding pneumatic system for the tubing connection, and has good compatibility with a variety of small pneumatic equipment and components.Easy installation: As a push-in fitting, the installation process does not require the use of complex tools, only need to accurately insert the air pipe into the joint, and the connection can be quickly realized, which greatly improves the installation efficiency and saves time and labor costs. At the same time, when the parts need to be repaired or replaced, the air pipe can also be easily pulled out, which is convenient for the maintenance and upgrade of the system.Shape design: The product is compact and lightweight, which not only saves installation space, but also is beautiful and practical, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint.

Connection: Threaded connection, can be closely connected with pneumatic components or pipelines with corresponding internal threads, stable connection and good sealing performance, can effectively prevent gas leakage, and ensure the stability of the pneumatic system.Material characteristics: Usually the main body is made of nickel-plated copper, which has good corrosion resistance and strength. On the one hand, it can adapt to a variety of complex working environments, is not easy to rust and corrode, and prolongs the service life of joints; On the other hand, it ensures that the joint will not be deformed or damaged when subjected to a certain pressure, ensuring the safe operation of the system.Specification size: Adapt to a specific diameter of the tubing, the "4" in PC4 - 01 generally means to fit the tubing with an outer diameter of 4mm, this clear specification design makes it able to accurately meet the requirements of the corresponding pneumatic system for the tubing connection, and has good compatibility with a variety of small pneumatic equipment and components.Easy installation: As a push-in fitting, the installation process does not require the use of complex tools, only need to accurately insert the air pipe into the joint, and the connection can be quickly realized, which greatly improves the installation efficiency and saves time and labor costs. At the same time, when the parts need to be repaired or replaced, the air pipe can also be easily pulled out, which is convenient for the maintenance and upgrade of the system.Shape design: The product is compact and lightweight, which not only saves installation space, but also is beautiful and practical, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint.

Easy connection: As a quick connector, the air pipe can be quickly connected and separated without tools, which greatly improves the efficiency of installation and maintenance. Simply insert the tubing into the fitting exactly for quick connection and easy removal when it is time to replace the tubing or repair the equipment.Excellent material: usually made of nickel-plated copper or high-quality engineering plastics. Nickel-plated copper material has good corrosion resistance, strength and conductivity, can adapt to a variety of complex working environments, and is not easy to rust and be corroded; Engineering plastic materials have the advantages of light weight, good insulation, low cost, etc., and also have certain strength and corrosion resistance.Specification adaptation: "10" generally means to adapt to the trachea with an outer diameter of 10mm, which is designed to be well matched with the trachea and pneumatic components of the corresponding diameter, and has strong versatility and can be widely used in various pneumatic systems.Stable structure: The T-shaped tee structure is reasonably designed, which can firmly connect the three gas pipes to ensure the smooth transmission of gas in the pipeline, and can withstand a certain pressure without deformation or leakage. At the same time, the connection parts of the joint are usually sealed design, such as O-ring sealing, etc., to ensure good sealing and effectively prevent gas leakage.Compact appearance: The overall shape design is compact and lightweight, which not only saves installation space, but also facilitates the layout and installation in different equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint.

Convenient and fast connection: As a push-in fitting, no tools are required, just insert the air hose alignment joint, and the connection can be quickly realized, which greatly improves the installation efficiency and saves a lot of time and labor costs when the pneumatic system needs to be quickly assembled or repaired.The material is excellent and durable: usually made of nickel-plated copper or high-quality engineering plastics. Nickel-plated copper material has good corrosion resistance, strength and conductivity, can adapt to a variety of complex working environments, and is not easy to rust and be corroded; Engineering plastic material is light weight, good insulation, low cost, but also has a certain strength and corrosion resistance, which can ensure the normal use and long service life of the joint under different conditions.Specification and size adaptation: "12" generally means to adapt to the trachea with an outer diameter of 12mm, which is designed to be well matched with the trachea and pneumatic components of the corresponding diameter, with strong versatility, and can be widely used in various pneumatic systems, which can meet the connection needs of different equipment and pipelines.Good sealing performance: The connection parts of the joint are usually sealed design, such as O-ring sealing, etc., to ensure good sealing and effectively prevent gas leakage. Even under a certain pressure fluctuation, it can maintain a stable sealing effect and ensure the normal operation of the pneumatic system.Reasonable shape design: the overall shape is compact and lightweight, which not only saves installation space, but also facilitates the layout and installation in different equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint. At the same time, its shape design is also conducive to the reasonable layout of pipelines and the smooth flow of airflow.

Convenient and fast connection: As a push-in fitting, no tools are required, just insert the air hose alignment joint, and the connection can be quickly realized, which greatly improves the installation efficiency and saves a lot of time and labor costs when the pneumatic system needs to be quickly assembled or repaired.The material is excellent and durable: usually made of nickel-plated copper or high-quality engineering plastics. Nickel-plated copper material has good corrosion resistance, strength and conductivity, can adapt to a variety of complex working environments, and is not easy to rust and be corroded; Engineering plastic material is light weight, good insulation, low cost, but also has a certain strength and corrosion resistance, which can ensure the normal use and long service life of the joint under different conditions.Specification and size adaptation: "12" generally means to adapt to the trachea with an outer diameter of 12mm, which is designed to be well matched with the trachea and pneumatic components of the corresponding diameter, with strong versatility, and can be widely used in various pneumatic systems, which can meet the connection needs of different equipment and pipelines.Good sealing performance: The connection parts of the joint are usually sealed design, such as O-ring sealing, etc., to ensure good sealing and effectively prevent gas leakage. Even under a certain pressure fluctuation, it can maintain a stable sealing effect and ensure the normal operation of the pneumatic system.Reasonable shape design: the overall shape is compact and lightweight, which not only saves installation space, but also facilitates the layout and installation in different equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume of the joint. At the same time, its shape design is also conducive to the reasonable layout of pipelines and the smooth flow of airflow.

Easy connection: As a quick-insert connector, no tools are required during installation, and the gas pipe can be quickly inserted into the connector to achieve reliable connection, which can effectively improve installation efficiency and save installation time and labor cost.Good sealing: The use of high-quality sealing materials and precision processing technology to ensure that the pneumatic system can withstand a certain pressure without leakage, to ensure the stability and reliability of the system.Excellent material: Usually the main body is made of copper or stainless steel and other materials, with good corrosion resistance and wear resistance, can adapt to different working environments, extend the service life.Compact shape: compact structure design, small space, easy to install and layout in a variety of pneumatic equipment and systems, is conducive to optimizing the space utilization of the system. Strong versatility: the size specifications meet industry standards, and can be used with a variety of different brands and models of gas pipes and pneumatic components, with high versatility and interchangeability.

Stable and reliable connection: the threaded connection method can be closely connected with the pneumatic components or pipelines with corresponding internal threads, and the connection is tight and stable, which can effectively prevent loosening and leakage, and ensure the tightness and stability of the pneumatic system.Excellent and durable material: Usually the main body is made of nickel-plated copper, which has good corrosion resistance and strength, can adapt to a variety of complex working environments, is not easy to rust and be corroded, and can ensure the normal use and long service life of the joint.Specification and size adaptation: Adapt to a specific diameter of the tube, "16" means that one end of the joint is suitable for the tube with an outer diameter of 16mm, and "04" may mean that the other end is suitable for the tube with an outer diameter of 4mm (the specific need to be defined according to the product specification of AirTAC), this variable diameter design can easily connect the tube with different diameters, and improve the versatility and adaptability of the joint.Convenient and efficient installation: As a push-in fitting, there is no need to use complex tools during the installation process, and the connection can be quickly realized by accurately inserting the air hose into the joint, which greatly improves the installation efficiency and saves time and labor costs. At the same time, when the parts need to be repaired or replaced, the air pipe can also be easily pulled out, which is convenient for the maintenance and upgrade of the system.Reasonable appearance design: L-shaped elbow design saves installation space, and the appearance is light and beautiful, which is conducive to reasonable layout and installation in various pneumatic equipment and systems, and will not affect the compactness and aesthetics of the overall structure due to the excessive volume or unreasonable shape of the joint.