Product type: Single relay that is part of a PLC - RPT relay module.Electrical characteristicsInput data: Rated input voltage is 24V DC and input voltage range is 18.5V DC to 33.6V DC at 20°C. At the rated input voltage, the typical input current is 9mA, the typical response time is 5ms, and the typical release time is 8ms. With polarity protection diode and damping diode, the operating voltage is shown as a yellow LED.Output data: 1 changeover contact for contact switching type, single contact type for switching contact, contact material for AgSnO. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the maximum inrush current is 10A (4s), and the minimum switching current is 10mA (at 12V). The switching capacitances are 2A (at 24V, 13 VDC), 0.2A (110 V, 13 DC), 0.1 A (220 V, 13 DC13), 3A (24 V, AC15), 3A (120 V, AC15), and 3A (230 V, AC15).

Product type: A single relay, which is a miniature power relay with plug-in connection for easy installation and maintenance.Electrical characteristicsInput data: The input voltage is rated at 12V DC and the input voltage range is from 7.2V DC to 33V DC. The drive is monostable and non-polarized, with a typical input current of 14mA, a typical response time of 5ms, a typical release time of 2.5ms, a coil resistance of 848Ω±10% at 20°C, and a maximum power consumption of 0.17W at rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, contact material of AgSnO, hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limiting continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the minimum switching current is 10mA (at 12V), the maximum rated power value (resistance load) will change accordingly, such as 140W (24V DC), 20W (48V DC), 18W (60V DC), etc., and the switching capacity is 2A (at 24V, DC13), 0.2A (at 110V, DC13), etc.

Product type: A single relay, which is a miniature power relay with plug-in connection for easy installation and maintenance.Electrical characteristicsInput data: The input voltage is rated at 18V DC and the input voltage range is 10.8V DC to 49.5V DC. The drive is monostable and non-polarized, with a typical input current of 9mA, a typical response time of 5ms, a typical release time of 2.5ms, a coil resistance of 1906Ω±10% at 20°C, and a maximum power consumption of 0.16W at rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, contact material of AgSnO, hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limiting continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the minimum switching current is 10mA (at 12V), and the maximum power rating value (resistive load) will change accordingly, such as 140W (24V DC), 20W (48V DC), 18W (60V DC), 23W (110V DC), 40W (220V DC), 1500VA (250V AC), The switching capacitances are 2A (at 24V, DC13), 0.2A (at 110V, DC13), 0.1A (at 220V, DC13), 3A (at 120V, AC15), 3A (at 230V, AC15).

Electrical characteristicsInput Voltage: Rated input voltage 24V DC, input voltage range from 14.4V DC to 66V DC.Typical input current: 7mA at rated input voltage, coil resistance 3390Ω±10% at 20°C.Response and release time: Typical response time is 5ms, typical release time is 2.5ms.Output contact: with 1 changeover contact, contact material is AgSnO, hard gold plated, maximum switching voltage 30V AC or 36V DC, minimum switching voltage 100mV (at 10mA), limited continuous current 50mA, maximum starting current 50mA, minimum switching current 1mA (at 24V), maximum power rating (resistive load) 1.2W (24V DC). When the plating layer is destroyed, the maximum switching voltage becomes 250V AC, the minimum switching voltage is 5V (at 100mA), the continuous current is limited to 6A, the minimum switching current is 10mA (at 12V), and the maximum power rating (resistive load) is 140W (24V DC).

Product Type: Single Relay.Electrical characteristicsInput data: Rated input voltage of 24V DC, input voltage range from 15.6V DC to 57.6V DC, and drive mode is monostable and non-polarized. At the rated input voltage, the typical input current is 17mA, the typical response time is 7ms, the typical release time is 3ms, and the coil resistance is 1440Ω±10% at 20°C.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, AgNi of the contact material. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 12V (at 10mA), the limited continuous current is 16A, the maximum inrush current is 50A (20ms), and the minimum switching current is 10mA (at 12V). The switching capacitances are 2A at 24V, DC13, 0.2A at 110V, DC13, 0.2A at 250V, DC13, 6A at 24V, AC15, 6A at 120V, AC15, and 6A at 250V, AC15. UL 508 compliant motor loads are 1/2HP, 120V AC (normally open contacts), 1HP, 240V AC (normally open contacts), 1/3HP, 120V AC (normally closed contacts), 3/4HP, 240V AC (normally closed contacts), 1/4HP, 200-250V AC.

Product type: Single relay, miniature power relay with plug-in connection with multi-layer gold-plated contacts.Electrical characteristicsInput data: The input voltage is rated at 48V DC and the input voltage range is 28.8V DC to 132V DC. The drive is monostable and non-polarized, with a typical input current of 8mA at a rated input voltage, a coil resistance of 6000Ω±10% at 20°C, and a maximum power consumption of 0.17W under the specified conditions.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, contact material of AgSnO, hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limited continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the minimum switching current is 10mA (at 12V), the maximum rated power value (resistive load) will change accordingly, such as 140W (24V DC), 20W (48V DC), etc., and the switching capacity is 2A (at 24V, DC13), 0.2A (at 110V, DC13), etc.

Product Type: Single relay, which belongs to the miniature power relay type, with plug-in connection, easy to install and maintain.Electrical characteristicsCoil side: Rated input voltage is 60V DC and input voltage range is 36V DC to 165V DC. The drive mode is monostable and bipolar. At the rated input voltage, the typical input current is 3mA, the typical response time is 5ms, the typical release time is 2.5ms, the coil resistance is 20500Ω±15% at 20°C, and the power consumption is 0.18W under the specified conditions.Contact side: 1 changeover contact type, single contact type for switching, contact material for AgSnO hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limiting continuous current and start-up current are both 50mA, the minimum switching current is 1mA (at 24V), and the rated power value (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the minimum switching current is 10mA (at 12V), the rated power value (resistance load) will change accordingly, such as 140W (24V DC), 20W (48V DC), 18W (60V DC), etc., and the switching capacity is 2A (at 24V, DC13), 0.2A (at 110V, DC13), etc.

Product type: Plug-in miniature power relay, which belongs to a single relay.Electrical characteristicsInput data: The rated input voltage is 24V DC, the input voltage range is 15.6V DC to 59.52V DC, and the drive mode is monostable and nonpolarized. At the rated input voltage, the typical input current is 17mA, the typical response time is 7ms, the typical release time is 3ms, and the coil resistance is 1440Ω±10% at 20°C.Output data: 2 changeover contacts for contact switching type, single contact type for switching contact, contact material for AgNi. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 10mA), the limited continuous current is 8A, the maximum inrush current is 25A (20ms), and the minimum switching current is 10mA (at 5V). Switching capacitance of 2A (at 24V, DC13), also up to 3A (at 24V, AC15), 3A (at 120V, AC15), and 3A (at 250V, AC15)

Product Type: Single Relay.Electrical characteristicsInput Data: The input voltage is rated at 24V DC and the input voltage range is from 14.4V DC to 66V DC. At the rated input voltage, the typical input current is 7mA, the typical response time is 5ms, the typical release time is 2.5ms, and the coil resistance is 3390Ω±10% at 20°C.Output data: 1 changeover contact for contact switching type, single contact type for switching contact, contact material for AgSnO. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the maximum inrush current is 10A (4s), and the minimum switching current is 10mA (at 12V). The switching capacitances are 2A (at 24V, 13 VDC), 0.2A (110 V, 13 DC), 0.1 A (220 V, 13 DC13), 3A (24 V, AC15), 3A (120 V, AC15), and 3A (230 V, AC15). The motor load per UL 508 is 1/4HP, 240 - 277V AC (normally open contact), 1/6HP, 240 - 277V AC (normally closed contact).

Product type: A single relay, which is a miniature power relay with plug-in connection for easy installation and maintenance.Electrical characteristicsInput data: Rated input voltage is 4.5V DC and input voltage range is 2.7V DC to 12.4V DC. The drive is monostable and non-polarized, with a typical input current of 38mA, a typical response time of 5ms, a typical release time of 2.5ms, a coil resistance of 119Ω±10% at 20°C, and a maximum power consumption of 0.17W at rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, contact material of AgSnO, hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limited continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the minimum switching current is 10mA (at 12V), the maximum power rating value (resistance load) will change accordingly, such as 140W (24V DC), 20W (48V DC), 18W (60V DC), etc., and the switching capacity is 2A (at 24V, DC13), 0.2A (at 110V, DC13), 0.1A (at 220V, DC13), etc.

Product type: Relay module, equipped with miniature switch relay, belongs to the plug-in relay.Electrical characteristicsInput data: Rated input voltage is 24V AC/DC with input voltage range of 19.2V AC/DC to 26.4V AC/DC AT 20°C. The drive mode is monostable and polarized, with a typical input current of 21mA, a typical response time of 7ms, and a typical release time of 11ms (at DC) at the rated input voltage. The protection circuit is a bridge rectifier, a varistor, and a working voltage indicator (LED indicator).Output data: 1 changeover contact (1PDT) for contact switching, single contact type for switching, AgNi contact material. The maximum switching voltage is 250V AC/DC, the limited continuous current is 6A, the maximum inrush current is 8A, and the open circuit rating (resistive load) is up to 95W (at 24V DC), 50W (at 48V DC), 45W (at 60V DC), 35W (at 110V DC), 55W (at 220V DC), 1500VA (at 250V AC).

Product type: Single relay, miniature power relay with plug-in connection with multi-layer gold-plated contacts.Electrical characteristicsInput data: The input voltage is rated at 12V DC and the input voltage range is from 7.8V DC to 29.76V DC. The drive is monostable and non-polarized, with a typical input current of 33mA, a typical response time of 7ms, a typical release time of 3ms, a coil resistance of 360Ω±10% at 20°C, and a maximum power consumption of 0.4W at rated input voltage.

Product Type: Single relay, a miniature power relay with plug-in connection for easy installation and maintenance, with multi-layer gold-plated contacts for manual operation.Electrical characteristicsInput data: The input voltage is rated at 12V DC and the input voltage range is from 7.2V DC to 33V DC. The drive is monostable and non-polarized, with a typical input current of 14mA, a typical response time of 5ms, a typical release time of 2.5ms, a coil resistance of 848Ω±10% at 20°C, and a maximum power consumption of 0.17W at rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, contact material of AgSnO, hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limiting continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limiting continuous current is 6A, the minimum switching current is 10mA (at 12V), the maximum rated power value (resistive load) will change accordingly, such as 140W (24V DC), 20W (48V DC), etc., and the switching capacity is 2A (at 24V, DC13), 0.2A (at 110V, DC13), etc.

Product type: Single relay, product family 3RH11.Electrical characteristicsInput Data: The input voltage is rated at 12V DC and the input voltage range is from 7.8V DC to 28.8V DC. The drive is monostable and non-polarized, with a typical input current of 33mA, a typical response time of 7ms, a typical release time of 3ms, and a coil resistance of 360Ω ±10% at 20°C at the rated input voltage. The protection circuit is a freewheeling diode and the status is shown as a yellow LED.

Product type: Single relay, miniature power relay with plug-in connection, multi-layer gold-plated contacts, 2 changeover contacts (2PDT).Electrical characteristicsInput data: Rated input voltage is 24V AC and power supply frequency is 50/60Hz. Typical input currents are 32mA at 50Hz, 24mA at 60Hz at rated input voltage. Typical response times are 3ms - 12ms (phase dependent), typical release time ranges are 2ms - 9ms (phase dependent), coil resistance is 350Ω±10% at 20°C, and power consumption is 0.77W under spection.Output data: Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the minimum switching current is 1mA (at 24V), the maximum inrush current and the limiting continuous current are both 50mA, and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 8A, the maximum impulse current is 50A (20ms), and the minimum switching current is 10mA (at 5V), and the maximum power rating value (resistance load) will change accordingly, such as 190W (24V DC), 85W (48V DC), 60W (60V DC), 44W (110V DC), 60W (220V DC), 2000VA（250V AC）。 The switching capacitances are 2A (at 24V, DC13), 0.2A (at 110V, DC13), 0.2A (at 250V, DC13), 2A (at 24V, AC15), 2A (at 120V, AC15), 2A (at 250V, AC15).

Product Type: Single Relay.Contact Information: With multi-layer gold contacts, 2 changeover contacts (DPDT), contact material is AgNi, hard gold plating.Electrical Characteristics:Input: Rated input voltage 24V DC, input voltage range 15.6V DC - 59.52V DC, monostable, non-polarized drive mode, typical input current 17mA at rated voltage, typical response time 7ms, typical release time 3ms, coil resistance 1440Ω±10% (at 20°C).Outputs: Maximum switching voltage 30V AC, 36V DC, minimum switching voltage 100mV (at 10mA), limited continuous current 50mA, maximum inrush current 50mA, minimum switching current 1mA (at 24V), switching capacity 2A (at 24V, DC13). When the gold layer is destroyed, the maximum switching voltage is 250V AC/DC, the continuous current is limited to 8A, the switching capacity is 2A (at 24V, AC15), etc.Connection: plugging / soldering connection

Product Type: Single Relay.Contact Information: With multi-layer gold contacts, 1 changeover contact.Operation function: Manual operation function, input voltage is 24V DC.Electrical Characteristics: Rated input voltage 24V DC, input voltage range 19.2V DC - 52.8V DC, typical input current of 18mA at rated voltage, typical response time of 9ms, typical release time of 6ms. The contact material is AgNi, hard gold coating, maximum switching voltage 30V AC, 36V DC, minimum switching voltage 12V (at 1mA), limited continuous current 50mA, maximum inrush current 50mA, minimum switching current 1mA (at 12V), switching capacity 1.5A (at 240V, AC15).Connection: plugging / soldering connection.

Basic information: It is a plug-in miniature power relay, and the product type is a single relay, which can be connected by plugging or welding.Electrical characteristicsInput Data: Rated input voltage of 24V DC, wide input voltage range of 15.6V DC to 57.6V DC, monostable, non-polarized drive, typical input current of 17mA at rated input voltage, typical response time of 7ms, typical release time of 3ms, coil resistance of 1440Ω±10% at 20°C.Output data: 1 changeover contact for contact switching type, single contact type for switching contact, contact material for AgNi, hard gold plating, maximum switching voltage of 30V AC or 36V DC with gold plating intact, 250V AC/DC after gold plating failure, 50mA limit continuous current at gold plating intact and 16A after failure.

Product Type: Single Relay.Electrical characteristicsInput Data: The input voltage is rated at 24V DC and the input voltage range is 15.6V DC to 57.6V DC. The drive is monostable and non-polarized, with a typical input current of 17mA, a typical response time of 7ms, a typical release time of 3ms, and a coil resistance of 1440Ω±10% at 20°C.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, AgNi of the contact material. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 12V (at 10mA), the limited continuous current is 16A, the maximum inrush current is 50A (20ms), and the minimum switching current is 10mA (at 12V). The switching capacitances are 2A at 24V, DC13, 0.2A at 110V, DC13, 0.2A at 250V, DC13, 6A at 24V, AC15, 6A at 120V, AC15, and 6A at 250V, AC15.

Product type: Single relay, miniature power relay with plug-in connection, with multi-layer gold-plated contacts, 2 changeover contacts (2PDT).Electrical characteristicsInput data: The input voltage is rated at 48V DC and the input voltage range is 31.2V DC to 119V DC. The drive is monostable and non-polarized, with a typical input current of 8.7mA, a typical response time of 7ms, a typical release time of 3ms, a coil resistance of 5520Ω±10% at 20°C, and a maximum power consumption of 0.42W at rated input voltage.

Product type: Single relay, miniature power relay with plug-in connection with multi-layer gold-plated contacts.Electrical characteristicsInput data: The input voltage is rated at 60V DC and the input voltage range is 39V DC to 148.8V DC. The drive is monostable and non-polarized, with a typical input current of 8.2mA, a typical response time of 7ms, a typical release time of 3ms, a coil resistance of 7340Ω±15% at 20°C, and a maximum power consumption of 0.49W at rated input voltage.Output data: 2 changeover contacts for contact switching type, single contact type for switching contact, contact material AgNi with hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limiting continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limiting continuous current is 8A, the maximum impulse current is 15A (300ms), the minimum switching current is 10mA (at 5V), and the maximum rated power value (resistive load) will change accordingly, such as 190W (24V DC), 85W (48V DC), 60W (60V DC), etc. The switching capacitance is 2A (at 24V, DC13), 0.2A (at 110V, DC13), 0.2A (at 250V, DC13), etc.

Product type: Single relay, a miniature power relay with plug-in connection and multiple layers of gold-plated contacts for manual operation.Electrical characteristicsInput data: The input voltage is rated at 60V DC and the input voltage range is 36V DC to 165V DC. The drive is monostable and non-polarized, with a typical input current of 3mA, a typical response time of 5ms, a typical release time of 2.5ms, a coil resistance of 20500Ω±15% at 20°C, and a maximum power consumption of 0.18W at rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, contact material of AgSnO, hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limiting continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 6A, the minimum switching current is 10mA (at 12V), the maximum power rating value (resistance load) will change accordingly, such as 140W (24V DC), 20W (48V DC), 18W (60V DC), etc., and the switching capacity is 2A (at 24V, DC13), 0.2A (at 110V, DC13), 0.1A (at 220V, DC13), etc.

Product Type: Single Relay.Electrical characteristicsInput data: The input voltage is rated at 24V DC and the input voltage range is 16.8V DC to 54V DC. The drive is monostable and non-polarized, with a typical input current of 17mA, a typical response time of 8ms, and a typical release time of 6ms at the rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, AgNi of the contact material. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 24mA), the limited continuous current is 16A, the maximum inrush current is 30A (300ms), the minimum switching current is 10mA (at 12V), and the maximum power rating (resistance load) is 384W (24V DC), 58W (48V DC), 48W (60V DC), 50W (110V DC), 80W (220V DC), 4000VA (250V). AC), with a switching capacity of 2A (at 24V, DC13), 1.5A (at 230V, AC15).

Product Type: Single Relay.Electrical characteristicsInput Data: Rated input voltage is 24V DC and input voltage range is 19.2V DC to 52.8V DC. The drive is monostable and non-polarized, with a typical input current of 18mA, a typical response time of 9ms, and a typical release time of 6ms at the rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, AgNi of the contact material. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 12V (at 10mA), the limited continuous current is 16A, the maximum inrush current is 32A (20ms), and the minimum switching current is 10mA (at 12V). The switching capacities are 2A (at 24V, DC13), 3A (at 24V, AC15), 3A (at 120V, AC15), and 3A (at 240V, AC15). UL 508 compliant motor loads are 1/2HP, 120V AC (normally open contact), 1HP, 240V AC (normally open contact), 1/3HP, 120V AC (normally closed contact), 1/2HP, 240V AC (normally closed contact).

Product type: Single relay, miniature power relay with plug-in connection with multi-layer gold-plated contacts.Electrical characteristicsInput Data: The input voltage is rated at 110V DC and the input voltage range is 71.5V DC to 272.8V DC. The drive is monostable and non-polarized, with a typical input current of 4.1mA, a typical response time of 7ms, a typical release time of 3ms, a coil resistance of 26600Ω±15% at 20°C, and a maximum power consumption of 0.45W at rated input voltage.Output data: 2 changeover contacts for contact switching type, single contact type for switching contact, contact material AgNi with hard gold plating. Under normal conditions, the maximum switching voltage is 30V AC, 36V DC, the minimum switching voltage is 100mV (at 10mA), the limiting continuous current and the maximum inrush current are both 50mA, the minimum switching current is 1mA (at 24V), and the maximum power rating (resistive load) is 1.2W (24V DC). When the gold plating layer is destroyed, the maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 100mA), the limited continuous current is 8A, the maximum impulse current is 50A (20ms), and the minimum switching current is 10mA (at 5V), the maximum power rating value (resistance load) will change accordingly, such as 190W (24V DC), 85W (48V DC), 60W (60V DC), 44W (110V DC), etc., and the switching capacity is 2A (24V, DC13), 0.2A (110V, DC13), 0.2A (250V, DC13), etc

Product Type: Single Relay.Electrical characteristicsInput Data: Rated input voltage is 24V DC and input voltage range is 19.2V DC to 52.8V DC. The drive is monostable and non-polarized, with a typical input current of 18mA, a typical response time of 9ms, and a typical release time of 6ms at the rated input voltage.Output data: 2 changeover contacts for contact switching type, single contact type for switching contact, contact material for AgNi. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 12V (at 10mA), the limited continuous current is 8A, the maximum inrush current is 16A (20ms), and the minimum switching current is 10mA (at 12V). The switching capacitances are 1A (at 24V, DC13), 1.5A (at 24V, AC15), 1.5A (at 120V, AC15), and 1.5A (at 240V, AC15). UL 508 compliant motor loads are 1/4HP, 120V AC (normally open contact), 1/2HP, 240V AC (normally open contact), 1/4HP, 120V AC (normally closed contact), 1/3HP, 240V AC (normally closed contact).

Product Type: Single Relay.Electrical characteristicsInput data: The input voltage is rated at 24V DC and the input voltage range is 16.8V DC to 54V DC. The drive is monostable and non-polarized, with a typical input current of 17mA, a typical response time of 8ms, and a typical release time of 6ms at the rated input voltage.Output data: 2 changeover contacts for contact switching type, single contact type for switching contact, contact material for AgNi. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 10mA), the limited continuous current is 8A, the maximum inrush current is 12A (20ms), the minimum switching current is 10mA (at 5V), and the maximum power rating (resistive load) is 190W (24V DC), 85W (48V DC), 60W (60V DC), 44W (110V DC), 60W (220V DC), 2000VA (250V AC), The switching capacity is 2A (at 24V, DC13), 1.5A (at 230V, AC15).

Product Type: Single Relay.Electrical characteristicsInput data: The input voltage is rated at 24V DC and the input voltage range is 18.7V DC to 59.5V DC. The drive is monostable and non-polarized, with a typical input current of 17mA, a typical response time of 7ms, a typical release time of 3ms, and a coil resistance of 1440Ω±10% at 20°C.Output data: 2 changeover contacts for contact switching type, single contact type for switching contact, contact material for AgNi. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 10mA), the limited continuous current is 8A, the maximum inrush current is 25A (20ms), and the minimum switching current is 10mA (at 5V). The switching capacitances are 2A (at 24V, DC13), 0.2A (at 250V, DC13), 3A (at 24V, AC15), 3A (at 120V, AC15), and 3A (at 250V, AC15).

Product type: Plug-in miniature power relay, which belongs to a single relay.Electrical characteristicsInput data: Rated input voltage of 24V DC, input voltage range from 18.7V DC to 57.6V DC, drive mode is monostable and non-polarized. At the rated input voltage, the typical input current is 17mA, the typical response time is 9ms, and the typical release time is 6ms.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, AgNi contact material, hard gold plating. The maximum switching voltage is 30V AC or 36V DC with the gold plating intact and 250V AC/DC when the gold plating is broken. The limiting continuous current is 50mA when the gold plating is intact and 16A after failure. The minimum switching voltage is 12V (at 1mA), the minimum switching current is 1mA (at 12V), and the maximum inrush current is 50mA. The switching capacity is 3A (at 240V, AC15) and can also reach 2A (at 24V, DC13).

Product type: A single relay, which is a miniature power relay with plug-in connection for easy installation and maintenance.Electrical characteristicsInput data: The input voltage is rated at 24V DC and the input voltage range is 16.8V DC to 54V DC. The drive is monostable and non-polarized, with a typical input current of 17mA, a typical response time of 8ms, and a typical release time of 6ms at the rated input voltage.Output data: 1 changeover contact of the contact switching type, single contact of the switching contact type, AgNi of the contact material. The maximum switching voltage is 250V AC/DC, the minimum switching voltage is 5V (at 24mA), the limited continuous current is 16A, the maximum inrush current is 30A (300ms), and the minimum switching current is 10mA (at 12V). The maximum power ratings (resistive load) are 384W at 24V DC, 58W at 48V DC, 48W at 60V DC, 50W at 110V DC, 80W at 220V DC, and 4000VA at 250V AC, with switching capacitances of 2A at 24V, DC13, 1.5A at 230V, AC15.