The DLC - 02 series is a DALI - 2 compliant controller. By matching with DALI input devices and DALI drivers, it forms a DALI digital lighting control system. The DLC - 02 software can scan and configure the devices on the DALI bus. Through two independent DALI buses, the DLC - 02 can connect up to 128 DALI drivers at most. DLC - 02 can directly supply power to DALI bus, so there is no need for an additional DALI bus power supply. The device has 4 built - in relays, which can be used for home applications and non - dimmable ON/OFF control. Besides, the DLC - 02 can support a series of events and functions for user - defined input devices. The DLC - 02 has a built - in battery, so the device's clock will keep running even if the AC power fails. The clock on the DLC - 02 can be synchronized with the local time, so users can set timing functions through the device to achieve cyclic event and sequence control, which is very suitable for other factory - made controls. In addition, the built - in Modbus TCP/IP

The LCM - 25 series is a 25W AC - DC constant - current LED driver. The output current can be selected via DIP switches. Models in this series can operate with an input voltage of 180 - 277VAC and offer models with different output currents ranging from 350mA to 1050mA. With a conversion efficiency of up to 88%, it adopts a fanless design. The entire series can work under natural air cooling within an ambient temperature range of - 30°C to + 85°C. LCM - 25 has multiple functions (such as over - voltage protection and over - current protection), enabling synchronous dimming, making it an ideal choice for LED lighting systems.

The LCM - 40 series is a 40W AC - DC constant - current LED driver. The output current can be selected via DIP switches. Models in this series can operate with an input voltage of 180 - 295VAC and offer models with different output currents ranging from 350mA to 1050mA. With a conversion efficiency of up to 92%, it adopts a fanless design. The entire series can work under natural air cooling within an ambient temperature range of - 30°C to + 90°C. LCM - 40 has multiple functions (such as over - voltage protection and over - current protection), enabling synchronous dimming, making it an ideal choice for LED lighting systems.

The LCM - 60 series is a 60W AC - DC constant - current LED driver. The output current can be selected via DIP switches. Models in this series can operate with an input voltage of 180 - 295VAC and offer models with different output currents ranging from 500mA to 1400mA. With a conversion efficiency of up to 92% and a fanless design, the entire series can operate under natural air cooling within an enclosure temperature range of - 30°C to + 90°C. The LCM - 60 is equipped with multiple functional options (such as dimming and synchronization functions), providing the best design flexibility for LED lighting systems.

The NGE100 series is a 100W gallium nitride (GaN) fast - charging universal charger. Two models are planned for this product. The international version, NGE100, can be equipped with 7 types of AC plugs (European, American, British, Australian, Chinese, Korean, Indian), which is very suitable for commercial use. The American - standard version, NGE100U, is equipped with a 90 - degree vertically foldable plug, suitable for countries using 2 - pin flat - headed plugs.The NGE100 (using gallium nitride technology) is designed to meet the international energy - efficiency regulations of Level VI. It has a no - load standby power consumption of <0.3W and an efficiency of up to 88%. With a compact size of only 62×30×85.5mm, it is equipped with four charging ports, including USB - C×2 and USB - A×2, which can charge multiple devices simultaneously. It supports multiple fast - charging protocols such as PD3.0 and QC3.0. When a charging device is plugged into the port, it can automatically identify the charging voltage of various electronic devices like 5V/9V/12V/15V/20V and adjust the charging power. And all ports can independently fast - charge. The USB - C1 or C2 port also supports 100W ultra - fast charging, which can be used immediately when plugged in, suitable for various mobile phones, tablets, laptops, game consoles, cameras, AirPods, etc.In addition, this product not only has built - in short - circuit/over - current/over - temperature protection functions. The case is made of 94V - 0 high - grade flame - retardant material. It has passed multiple national safety certifications such as CB / DEKRA / UL / PSE / BSMI / CCC / RCM / KC / BIS / EAC / CE / UKCA / FCC and comes with a 3 - year warranty.

The DLP - 04 is a high - efficiency DALI power supply with a small case that can supply 240mA current to DALI control devices and DALI equipment without built - in power supplies, and its wide operating temperature range of - 20°C to + 60°C can meet various application scenarios. With over 30 years of experience in manufacturing reliable industrial power supplies, it is especially suitable for driving DALI - compliant environments to ensure stable operation.

The DLP - 04 is a high - efficiency DALI power supply with a small case that can supply 240mA current to DALI control devices and DALI equipment without built - in power supplies, and its wide operating temperature range of - 20°C to + 60°C can meet various application scenarios. With over 30 years of experience in manufacturing reliable industrial power supplies, it is especially suitable for driving DALI - compliant environments to ensure stable operation.

The LCM-40U series is a 35W AC-DC constant-current LED driver. The output current can be selected via DIP switches. Models in this series operate with an input voltage of 90–132VAC and offer different output current options ranging from 350mA to 1050mA. With a conversion efficiency of up to 87.5% and a fanless design, the entire series functions under natural air cooling within an enclosure temperature range of -30°C to +90°C. The LCM-40U is equipped with multiple functional options (such as dimming and synchronization), serving as an ideal choice for LED lighting system design.

The LCM - 60 series is a 50W AC - DC LED driver. The output current can be selected via DIP switches. Models in this series operate with an input voltage of 90–132VAC and offer different output current options ranging from 500mA to 1400mA. With a conversion efficiency of up to 89% and a fanless design, the entire series functions under natural air cooling within an enclosure temperature range of -30°C to +90°C. The LCM - 60 is equipped with multiple functional options (such as dimming and synchronization functions), providing optimal design flexibility for LED lighting systems.

The NGE100 series is a 100W gallium nitride (GaN) fast - charging universal charger. Two models are planned for this product. The international version, NGE100, can be equipped with 7 types of AC plugs (European, American, British, Australian, Chinese, Korean, Indian), which is very suitable for commercial use. The American - standard version, NGE100U, is equipped with a 90 - degree vertically foldable plug, suitable for countries using 2 - pin flat - headed plugs.The NGE100 (using gallium nitride technology) is designed to meet the international energy - efficiency regulations of Level VI. It has a no - load standby power consumption of <0.3W and an efficiency of up to 88%. With a compact size of only 62×30×85.5mm, it is equipped with four charging ports, including USB - C×2 and USB - A×2, which can charge multiple devices simultaneously. It supports multiple fast - charging protocols such as PD3.0 and QC3.0. When a charging device is plugged into the port, it can automatically identify the charging voltage of various electronic devices like 5V/9V/12V/15V/20V and adjust the charging power. And all ports can independently fast - charge. The USB - C1 or C2 port also supports 100W ultra - fast charging, which can be used immediately when plugged in, suitable for various mobile phones, tablets, laptops, game consoles, cameras, AirPods, etc.In addition, this product not only has built - in short - circuit/over - current/over - temperature protection functions. The case is made of 94V - 0 high - grade flame - retardant material. It has passed multiple national safety certifications such as CB / DEKRA / UL / PSE / BSMI / CCC / RCM / KC / BIS / EAC / CE / UKCA / FCC and comes with a 3 - year warranty.

The XLN - 60 series is a 60W LED power supply with constant - power and constant - voltage output. Models in this series can operate with an input voltage of 100 - 305VAC and offer models with different currents ranging from 900mA to 1700mA. The output current can be adjusted via NFC. With a high conversion efficiency of up to 90%, the entire series can work within a case temperature range of - 25°C to + 90°C under natural air cooling. The XLN - 60 follows the latest Triac - and DALI - 2 isolated dimming designs, and can also be adjusted simply by push - type dimming, providing the best design flexibility for LED lighting systems.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese) (Note 1). It has a two-stage charging characteristic. It has a universal international full-range AC input. It has an active PFC function with PF > 0.97. The no-load power consumption is < 0.5W. It has a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). Protection types include: short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling. It has a fully enclosed plastic housing. A 2-color LED indicates the charging status. Certifications: UL / PSE / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese) (Note 1). It has a two-stage charging characteristic. It has a universal international full-range AC input. It has an active PFC function with PF > 0.97. The no-load power consumption is < 0.5W. It has a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). Protection types include: short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling. It has a fully enclosed plastic housing. A 2-color LED indicates the charging status. Certifications: UL / PSE / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese) (Note 1). It has a two-stage charging characteristic. It has a universal international full-range AC input. It has an active PFC function with PF > 0.97. The no-load power consumption is < 0.5W. It has a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). Protection types include: short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling. It has a fully enclosed plastic housing. A 2-color LED indicates the charging status. Certifications: UL / PSE / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese). It has a two-stage charging characteristic. It features a universal international full-range AC input. It is equipped with an active PFC function with PF > 0.94. The no-load power consumption is less than 1W. It has a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). Protection types include short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling. It has a fully enclosed plastic housing. A 2-color LED indicates the charging status. Certifications: UL / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese). It has a two-stage charging characteristic. It features a universal international full-range AC input. It is equipped with an active PFC function with PF > 0.94. The no-load power consumption is less than 1W. It has a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). Protection types include short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling. It has a fully enclosed plastic housing. A 2-color LED indicates the charging status. Certifications: UL / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese). It has a two-stage charging characteristic. It features a universal international full-range AC input. It is equipped with an active PFC function with PF > 0.94. The no-load power consumption is less than 1W. It has a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). Protection types include short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling. It has a fully enclosed plastic housing. A 2-color LED indicates the charging status. Certifications: UL / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese). It has a two-stage charging characteristic. With a universal international full-range AC input, it is equipped with an active PFC function, and the power factor PF > 0.90. The no-load power consumption is less than 1W. It is equipped with a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). The protection types include short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling and has a fully enclosed plastic housing. A two-color LED indicates the charging status. Certifications: UL / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese). It has a two-stage charging characteristic. With a universal international full-range AC input, it is equipped with an active PFC function, and the power factor PF > 0.90. The no-load power consumption is less than 1W. It is equipped with a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). The protection types include short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling and has a fully enclosed plastic housing. A two-color LED indicates the charging status. Certifications: UL / TUV / EAC / CB / FCC / CE / UKCA.

It can charge lead-acid batteries (flooded type, gel type, and absorbed glass mat type) and lithium batteries (lithium-iron, lithium-manganese). It has a two-stage charging characteristic. With a universal international full-range AC input, it is equipped with an active PFC function, and the power factor PF > 0.90. The no-load power consumption is less than 1W. It is equipped with a 3-pole AC IEC320-C14 input interface. It is a Class I power supply (with a grounding pin). The protection types include short circuit, overload, overvoltage, and overtemperature. It adopts natural air cooling and has a fully enclosed plastic housing. A two-color LED indicates the charging status. Certifications: UL / TUV / EAC / CB / FCC / CE / UKCA.

The LCM - 25DA series is a 25W AC - DC LED driver. The output current can be adjusted via toggle switches. It has a DALI interface and complies with IEC62386. Models in this series can operate with an input voltage of 180 - 277VAC and offer models with different output currents ranging from 350mA to 1050mA. With a conversion efficiency of up to 86% and a fanless design, the entire series can work under natural air cooling within an enclosure temperature range of - 30°C to + 85°C. The LCM - 25DA is equipped with multiple functional options (such as push - button dimming and synchronization functions) for LED lighting systems, providing design flexibility.

The LCM - 40DA series is a 40W AC - DC LED driver. The output current can be adjusted via toggle switches. It has a DALI interface and complies with IEC62386. Models in this series can operate with an input voltage of 180 - 295VAC and offer models with different output currents ranging from 350mA to 1050mA. With a conversion efficiency of up to 91% and a fanless design, the entire series can work under natural air cooling within an enclosure temperature range of - 30°C to + 90°C. The LCM - 40DA is equipped with multiple functional options (such as push - button dimming and synchronization functions), providing flexibility for LED lighting systems.

The LCM - 40 series is a 40W AC - DC constant - current LED driver. The output current can be selected via DIP switches. Models in this series can operate with an input voltage of 180 - 295VAC and offer models with different output currents ranging from 350mA to 1050mA. With a conversion efficiency of up to 92%, it adopts a fanless design. The entire series can work under natural air cooling within an ambient temperature range of - 30°C to + 90°C. LCM - 40 has multiple functions (such as over - voltage protection and over - current protection), enabling synchronous dimming, making it an ideal choice for LED lighting systems.

The LCM - 40TW series is a 40W constant - power output LED driver. It has two output channels, enabling brightness and color temperature adjustment functions. Models in this series can operate with an AC input voltage of 180 - 277V. The output current range is 500mA - 1050mA, and the output current can be set via DIP switches. With a conversion efficiency of 87%, this series can operate under natural heat dissipation within an enclosure temperature range of - 30°C to + 85°C. The LCM - 40TW is based on DALI - 2 D8 for color temperature adjustment functions and also supports independent DT6 applications for two - group lighting. It can be adjusted by push - button switches, providing flexibility for LED lighting system design.

The LCM - 60DA series is a 60W AC - DC LED driver. The output current can be adjusted via toggle switches. It has a DALI interface and complies with IEC62386. Models in this series can operate with an input voltage of 180 - 295VAC and offer models with different output currents ranging from 500mA to 1050mA. With a conversion efficiency of up to 92% and a fanless design, the entire series can work under natural air cooling within an enclosure temperature range of - 30°C to + 90°C. The LCM - 60DA is equipped with multiple functional options (such as push - button dimming and synchronization functions), providing the best design flexibility for LED lighting systems.

The LCM - 60 series is a 60W AC - DC constant - current LED driver. The output current can be selected via DIP switches. Models in this series can operate with an input voltage of 180 - 295VAC and offer models with different output currents ranging from 500mA to 1400mA. With a conversion efficiency of up to 92% and a fanless design, the entire series can operate under natural air cooling within an enclosure temperature range of - 30°C to + 90°C. The LCM - 60 is equipped with multiple functional options (such as dimming and synchronization functions), providing the best design flexibility for LED lighting systems.

DC/DC step - down converter, constant - current output ranging from 300mA to 700mA, wide input voltage of 9 - 36VDC, wide output LED series - connection voltage of 2 - 32VDC, efficiency of up to 95%. It has a built - in EMI filter circuit, complies with BS EN/EN55015 and FCC part15, and no additional input filters or capacitors are required. It features PWM and remote on/off. Protection types include short - circuit and over - temperature protection. Natural air cooling. Both pin - type and wire - type are fully potted and meet IP67 rating. Compact size, low - cost and highly reliable. Suitable for LED lighting drive applications.

DC/DC step - down converter, constant - current output ranging from 300mA to 700mA, wide input voltage of 9 - 36VDC, wide output LED series - connection voltage of 2 - 32VDC, efficiency of up to 95%. It has a built - in EMI filter circuit, complies with BS EN/EN55015 and FCC part15, and no additional input filters or capacitors are required. It features PWM and remote on/off. Protection types include short - circuit and over - temperature protection. Natural air cooling. Both pin - type and wire - type are fully potted and meet IP67 rating. Compact size, low - cost and highly reliable. Suitable for LED lighting drive applications.

DC/DC step - down converter, constant - current output ranging from 300mA to 700mA, wide input voltage of 9 - 36VDC, wide output LED series - connection voltage of 2 - 32VDC, efficiency of up to 95%. It has a built - in EMI filter circuit, complies with BS EN/EN55015 and FCC part15, and no additional input filters or capacitors are required. It features PWM and remote on/off. Protection types include short - circuit and over - temperature protection. Natural air cooling. Both pin - type and wire - type are fully potted and meet IP67 rating. Compact size, low - cost and highly reliable. Suitable for LED lighting drive applications.

DC/DC step - down converter, constant - current output ranging from 300mA to 700mA, wide input voltage of 9 - 36VDC, wide output LED series - connection voltage of 2 - 32VDC, efficiency of up to 95%. It has a built - in EMI filter circuit, complies with BS EN/EN55015 and FCC part15, and no additional input filters or capacitors are required. It features PWM and remote on/off. Protection types include short - circuit and over - temperature protection. Natural air cooling. Both pin - type and wire - type are fully potted and meet IP67 rating. Compact size, low - cost and highly reliable. Suitable for LED lighting drive applications.