ModelR-5TypeMicro-reflectorApplicable productPZ2-61/PZ-M61

ModelPQ-01TypeThrubeam Short-detecting distanceDetecting distance100 mm 3.94"Light sourceInfrared LEDDetectable object1 mm 0.04" dia. min. opaquematerialsMinimum detectable object0.5 mm 0.02" dia. copper wireResponse time1 ms max.Operation modeDARK-ON *1Indicator lampOutput： Red LEDControl outputNPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. *2Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumption30 mA or lessEnvironmental resistanceEnclosure ratingIP64Ambient lightIncandescent lamp: 3,000 lux max., Sunlight: 10,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsMaterialAmplifi er： Polysulfone, Sensor head： PolyarylateWeightApprox. 48 g (including 2m 6.6' cable)*1 For the LIGHT-ON operation mode, contact KEYENCE.*2 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNPoutput converter.

ModelPQ-02TypeThrubeam Middle-detecting distanceDetecting distance300 mm 11.81"Light sourceInfrared LEDDetectable object2 mm 0.08" dia min. opaquematerialsMinimum detectable object0.9 mm 0.04" dia. copper wireResponse time1 ms max.Operation modeDARK-ON *1Indicator lampOutput： Red LEDControl outputNPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. *2Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumption30 mA or lessEnvironmental resistanceEnclosure ratingIP64Ambient lightIncandescent lamp: 3,000 lux max., Sunlight: 10,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsMaterialAmplifi er： Polysulfone, Sensor head： PolyarylateWeightApprox. 48 g (including 2m 6.6' cable)*1 For the LIGHT-ON operation mode, contact KEYENCE.*2 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNPoutput converter.

ModelPS-52*1TypeThin, small, ThrubeamDetecting distanceTURBO600 mm 23.62"*2FINE300 mm 11.81"Light sourceInfrared LEDSmallest detectable objectTURBO0.3 dia.*3FINEEnvironmental resistanceEnclosure rating-Ambient temperature-10 to +60 °C 14 to 140 °F (No freezing)Relative humidity35 to 85 % RHWeightApprox. 30 g (including 2-m 6.6' cable)*1 Models with a (C) come with plug-in connectors. (For other models, use the connector included with the amplifier.)*2 Use FINE MODE for models which do not feature TURBO MODE.*3 Gives the size of the object which can be detected at the maximum detecting distance.

ModelPS-58*1TypeCylindrical, ThrubeamDetecting distanceTURBO-FINE700 mm 27.56"Light sourceInfrared LEDSmallest detectable objectTURBO-FINE0.5 dia.*2Environmental resistanceEnclosure ratingIP67Ambient temperature-10 to +60 °C 14 to 140 °F (No freezing)Relative humidity35 to 85 % RHWeightApprox. 30 g (including 2-m 6.6' cable)*1 Models with a (C) come with plug-in connectors. (For other models, use the connector included with the amplifier.)*2 Gives the size of the object which can be detected at the maximum detecting distance.

ModelPX-10TypeCable typeOutputNPNResponse time500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)Output selectionLIGHT-ON/DARK-ONIndicator lamp- Operation indicator：Red LED x 2, DSC orange LED x 1- Dual digital monitor：Dual 7-segment display[Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together,current value range：0 to 65504, excess gain：0 P to 999 P]- Hold function：Possible to display both peak and bottom hold values. Selectable from 5 variations.- Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)]- Scaling displayDetection modeLight intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]Shift functionVariable between –1999 and 9999Timer functionTimer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shotTimer duration selectable：1 ms to 9999 msMaximum error against the setting value：10% max.Control outputNPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.External inputInput time 2 ms (ON)/20 ms (OFF) min.Interference preventionUp to 4 units (in all power modes)*1RatingPower voltage12 to 24 VDC, Ripple (P-P) 10 % or less, Class2*2Power consumptionStandard mode：50 mA max. at 24 V/55 mA max. at 12 VPower saving mode：40 mA max. at 24 V/45 mA max. at 12 VEnvironmental resistanceEnclosure ratingIEC: IP67/JEM: IP67/NEMA: 4XAmbient temperature-10 to +55 °C 14 to 131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing：PBT, display：PSU, display cover/connector cover：SUS304, radiator plate：SUS304, gasket：NBRWeightApprox. 100 g (Including cable)*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affectedsomewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts.*2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72).*3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below.2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

ModelCZ-H32TypeAdjustable spotDetecting area50 to 95 mm 1.97" to 3.74" (Reco mmended: 70 mm 2.76")Smallest spot diameterSmall: 3 mm 0.12"dia.Medium: 4.5 mm 0.18"dia.Large: 5.5 mm 0.22"dia.at respective reference distance*1Light sourceRed LED (665 nm)/Green LED (520 nm)/Blue LED (465 nm)Minimum bend radius of fi ber25 mm 0.98"Environmental resistanceEnclosure ratingIP40Ambient lightIncandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axisMaterialHousing：Fiberglass reinforced plastic , Lens cover：PolyarylateWeightApprox. 40 g*1 Reference distance: 65 mm 2.56” for Small, 60 mm 2.36” for Medium, and 50 mm 1.97” for Large

ModelCZ-H52TypeFluorescence detection UVDetecting area25 to 55 mm 0.98" to 2.17" (Reco mmended: 35 mm 1.38")Smallest spot diameterApprox. 10 mm 0.39 dia. at reference distance of 25 mm 0.98""Light sourceUV (ultraviolet) LED (375 nm) *1Minimum bend radius of fi ber―Receivable wavelength (Receiver)425 to 550 nmEnvironmental resistanceEnclosure ratingIP40Ambient lightIncandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axisMaterialHousing：Fiberglass reinforced plastic , Lens cover：GlassWeightApprox. 40 g*1 The CZ-H52 emits ultraviolet light from the transmitter. Do not directly look at the lightsource while in operation.

ModelLR-W70TypeSmall/Dual Spot Type2 m 6.56' cable typeDetecting distance30 to 70 mm 1.18" to 2.76"Min. spot diameterApprox. 1.6 x 2.9mm at 50 mm 0.06" × 0.11" at 1.97"Light sourceWhite LEDMutual interference reduction functionUp to 2 units when alternate frequencies setTimerOFF/ON delay/OFF delay/One-shotResponse time1-Spot Mode: 200 µs, 1 ms, 10 ms, 100 ms, 500 ms selectable2-Spot Mode, Difference Monitoring: 500 µs, 2.5 ms, 20 ms, 200 ms, 999 ms selectable2-Spot Mode, 2-Point Matching: 400 µs, 2 ms, 20 ms, 200 ms, 999 ms selectable*1I/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, remaining voltage: 2 V or lessN.O./N.C. selectable*2External inputTuning /Transmission OFF selectableShort circuit current: 1 mA or less for NPN/2 mA or less for PNPFor the applied voltage, see the wiring diagrams in the instruction manual.For the input times, see the time charts in the instruction manual.*2Protection circuitProtection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connectionPower supplyPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption60 mA or less (without load) at 24 VDC;110 mA or less (without load) at 12 VDC)*3Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or lessAmbient temperature-20 to +50 °C -4 to 122 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover: PPSU, Buttons: PES,Lens cover and display: PMMA (scratch-resistant coating),Cable bushing: PBT, Cable: PVCWeightApprox. 130 g (including cable)*1 When alternate frequencies are set, the response time increases by approximately 20%.*2 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*3 180 mA or less (at 10 V, with load)

ModelLR-X50TypeCable TypeDetecting Distance25.0 to 50.0 mm 0.98" to 1.97"Standard Detectable Deviation0.5  mm 0.02"Display Resolution0.1 mm 0.004"Spot SizeApprox. 0.2 mm × 1.5 mm 0.008" × 0.06"(at a detecting distance of 50 mm 1.97")Response Time500 µs*1/1 ms/3 ms/10 ms/200 ms SelectableLight SourceTypeGreen laser (505 nm)Laser ClassClass 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2)IO-LinkSpecification v1.1/COM2 (38.4 kbps)FunctionsTimer FunctionTimer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shotI/OControl OutputNPN open collector/PNP open collector, N.O./N.C selectable.  *330 VDC or lower, 50 mA or lower, Residual voltage 2 V or lowerExternal InputExternal Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable  *3Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lowerInput time 3 ms or more ON, 20 ms or more OFF(25 ms or more ON, 25 ms or more OFF when External Set is selected only)Protection CircuitProtection against reverse power connection, protection against output overcurrent,protection against output surge, protection against reverse output connectionPower supplyPower voltage16 to 30 VDC (including 10% ripple (P-P) or less), class 2Power consumptionDuring normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current)ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current)Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp: 16000 lux or lessSunlight: 16000 lux or lessAmbient temperature-10°C to +50°C 14°F to + 122°F (no freezing)Relative humidity35 to 85% RH (no condensation)Vibration resistance10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axesShock resistance1000 m/s2 (100G) 6 times each for X, Y, and Z axesMaterialHead Case: SUS316L; Head Lens Cover: PSUHead Gasket: FKM (lens cover), EVM (cable)Cable: PVCAmplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POMAccessoriesInstruction manual, laser warning labelWeightApprox. 90 g*1 If 500 µs is selected, the following limitations apply.· Only 2-point calibration can be performed.· The detection range masking is set during calibration. (Manual setting of the masking range is not supported.)· Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used.*2 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No. 56.*3 The I/O can be selected from the following combinations. Control output × 2, Control output + External input

ModelLR-XB1AppearanceFine-Tuning Mounting Bracket (Includes Sensor Head Fastening Screws × 2 Mounting Bracket Locking Screws × 2/Plate Nut × 1)MaterialZinc Nickel Plating SUS304 PPS OtherWeightApprox. 30 g

ModelMU-CB2TypePower cableApplicable productMU-N SeriesCable endCable end: 2-core loose wires, Controller side: ConnectorLength2 m 6.56'MaterialPVC (Polyvinyl chloride)NoteExpansion unitWeightApprox. 100 g

ModelMU-CB8TypePower cableApplicable productMU-N SeriesCable endCable end: 8-core loose wires, Controller side: ConnectorLength2 m 6.56'MaterialPVC (Polyvinyl chloride)NoteMain unitWeightApprox. 150 g

ModelMU-N11Main unit/Expansion unitMain unitResponse timeDepends on the connected sensor model*1Expansion unitsUp to 4 expansion units*2I/OControl output4 max.,NPN open collector/PNP open collector selectable,24 V or less,Main unit: 50 mA or less*3,Expansion unit: 20 mA or less,Residual voltage: 2 V or less,N.O./N.C. selectable*1*4External input5 max.,Short-circuit current: NPN: 1 mA or less,PNP: 2 mA or less,For the applied voltage, see wiring diagrams(page 3 of the instruction manual)*1*4Analog output1 max.,Current output/ Voltage output selectable,Current output: 4 to 20 mA,Max. load resistance: 450 Ω,Voltage output: 0 to 10 V,External load resistance: 5 kΩ or more*1*4Protection circuitProtection against reverse power connection,power supply surge, output overcurrent,output surge, and reverse output connectionPower supplyPower voltage24 VDC, ripple (P-P) 10% or less, Class 2 or LPSCurrent consumption70 mA or less (without load)*5SensorconnectionspecificationAllowable sensor current150 mA or lessN-busconnectionspecificationAllowable passingcurrent1200 mA or lessEnvironmental resistanceAmbient temperature-20 to +50 °C -4 to 122 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase and dust cover: PolycarbonateButtons: PolyacetalDisplay panel: PMMAWeightApprox. 70 g*1 The response time, as well as the types and number of inputs and outputs that are available, vary depending on the connected sensor model.For details, see the specific "MU-N Series User's Manual" for the model that will be connected.*2 Up to 5 N-bus devices, including the main unit (or network unit), can be linked together.*3 20 mA or less: When using the expansion unit.*4 For more information on Control output, External input, and Analog output wire allocation, please refer to the table of "Power Cable Pin Layout" on page 3 of this manual.*5 1500 mA or less when a sensor is attached, 4 outputs (with loads) are used, and expansion units are connected.

ModelMU-N12Main unit/Expansion unitExpansion unitResponse timeDepends on the connected sensor model*1Expansion unitsUp to 4 expansion units*2I/OControl output4 max.,NPN open collector/PNP open collector selectable,24 V or less,Main unit: 50 mA or less*3,Expansion unit: 20 mA or less,Residual voltage: 2 V or less,N.O./N.C. selectable*1*4External input5 max.,Short-circuit current: NPN: 1 mA or less,PNP: 2 mA or less,For the applied voltage, see wiring diagrams(page 3 of the instruction manual)*1*4Analog output-Protection circuitProtection against reverse power connection,power supply surge, output overcurrent,output surge, and reverse output connectionPower supplyPower voltage24 VDC, ripple (P-P) 10% or less, Class 2 or LPSCurrent consumption55 mA or less (without load)*5SensorconnectionspecificationAllowable sensor current150 mA or lessN-busconnectionspecificationAllowable passingcurrent900 mA or lessEnvironmental resistanceAmbient temperature-20 to +50 °C -4 to 122 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase and dust cover: PolycarbonateButtons: PolyacetalDisplay panel: PMMAWeightApprox. 70 g*1 The response time, as well as the types and number of inputs and outputs that are available, vary depending on the connected sensor model.For details, see the specific "MU-N Series User's Manual" for the model that will be connected.*2 Up to 5 N-bus devices, including the main unit (or network unit), can be linked together.*3 20 mA or less: When using the expansion unit.*4 For more information on Control output, External input, and Analog output wire allocation, please refer to the table of "Power Cable Pin Layout" on page 3 of this manual.*5 1185 mA or less when a sensor is attached, 4 outputs (with loads) are used, and expansion units are connected.

ModelPS-N10TypeZero lineOutput-Main unit/Expansion unitExpansion unitI/OControl outputsNone*1External inputNoneOutput selectionLIGHT-ON/DARK-ON (switch-selectable)Timer functionTimer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9999 ms, Maximum error against the setting value: ±10% max.Control output―Number of interference prevention units4 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled)Response time500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)External inputInput time 2 ms (ON)/20 ms (OFF) or more*2Case sizeH 32.6 mm 1.28"× W 9.8 mm 0.39" × L 78.7 mm 3.1"Unit expansionUp to 16 units (Up to 17 units including 1 main unit can be connected in total.)Protection circuitReverse polarity protection, Over-current protection, Surge absorberRatingPower voltage24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPSPower consumptionNormal: 810 mW or less (at 30V. 28 mA max. at 24 V, 34 mA max. at 12 V)Eco on mode: 700 mW or less (at 30V. 24 mA max. at 24 V, 27 mA max. at 12 V) Eco Full mode: 490 mW or less (at 30V. 17 mA max. at 24 V, 20 mA max. at 12 V)Environmental resistanceAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsMaterialCaseMain unit and cover material: PolycarbonateCablePVCWeightApprox. 20 g*1 Counted as one output when added to a NU Series communication unit.*2 Input time is 25 ms (ON)/25 ms (OFF) when the external calibration time is selected.*3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a unit.One or two more units connected: -20 to +55 °C -4 to 131 °F; 3 to 10 more units connected: -20 to +50 °C -4 to 122 °F; 11 to 16 more units connected: -20 to +45 °C -4 to 113 °F.

ModelPX-10CTypeConnector typeOutputNPNResponse time500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)Output selectionLIGHT-ON/DARK-ONIndicator lamp- Operation indicator：Red LED x 2, DSC orange LED x 1- Dual digital monitor：Dual 7-segment display[Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together,current value range：0 to 65504, excess gain：0 P to 999 P]- Hold function：Possible to display both peak and bottom hold values. Selectable from 5 variations.- Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)]- Scaling displayDetection modeLight intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]Shift functionVariable between –1999 and 9999Timer functionTimer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shotTimer duration selectable：1 ms to 9999 msMaximum error against the setting value：10% max.Control outputNPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.External input―Interference preventionUp to 4 units (in all power modes)*1RatingPower voltage12 to 24 VDC, Ripple (P-P) 10 % or less, Class2*2Power consumptionStandard mode：50 mA max. at 24 V/55 mA max. at 12 VPower saving mode：40 mA max. at 24 V/45 mA max. at 12 VEnvironmental resistanceEnclosure ratingIEC: IP67/JEM: IP67/NEMA: 4XAmbient temperature-10 to +55 °C 14 to 131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing：PBT, display：PSU, display cover/connector cover：SUS304, radiator plate：SUS304, gasket：NBRWeightApprox. 50 g*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affectedsomewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts.*2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72).*3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below.2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

ModelPX-10PTypeCable typeOutputPNPResponse time500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)Output selectionLIGHT-ON/DARK-ONIndicator lamp- Operation indicator：Red LED x 2, DSC orange LED x 1- Dual digital monitor：Dual 7-segment display[Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together,current value range：0 to 65504, excess gain：0 P to 999 P]- Hold function：Possible to display both peak and bottom hold values. Selectable from 5 variations.- Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)]- Scaling displayDetection modeLight intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]Shift functionVariable between –1999 and 9999Timer functionTimer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shotTimer duration selectable：1 ms to 9999 msMaximum error against the setting value：10% max.Control outputPNP open-collector 30 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.External inputInput time 2 ms (ON)/20 ms (OFF) min.Interference preventionUp to 4 units (in all power modes)*1RatingPower voltage12 to 24 VDC, Ripple (P-P) 10 % or less, Class2*2Power consumptionStandard mode：50 mA max. at 24 V/55 mA max. at 12 VPower saving mode：40 mA max. at 24 V/45 mA max. at 12 VEnvironmental resistanceEnclosure ratingIEC: IP67/JEM: IP67/NEMA: 4XAmbient temperature-10 to +55 °C 14 to 131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing：PBT, display：PSU, display cover/connector cover：SUS304, radiator plate：SUS304, gasket：NBRWeightApprox. 100 g (Including cable)*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affectedsomewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts.*2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72).*3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below.2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

ModelPX-H61TypeM12 Reflective StandardLight source LEDRed 4-element LED (Wavelength：635 nm)Detecting distanceTURBO400 mm 15.7"SUPER600 mm 23.6"ULTRA1200 mm 47.2"MEGA2000 mm 78.7"Detectable object―Spot diameterApprox. 15 x 15 mm 0.59"at 100 mm 3.94"Approx. 65 x 65 mm 2.56"at 500 mm 19.69"Environmental resistanceEnclosure ratingIEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69KAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7AccessoriesScrew nut x 2,toothed washer x 1WeightApprox. 80 g*1 (Including cable)*1 The PX-H71G, H72G and H61G have SUS304 spiral protective tube on the cables.

ModelPX-H71*1TypeM8 Thrubeam StandardLight source LEDRed 4-eleant LED (Wavelength：635 nm)Detecting distanceTURBO4 m 13.1'SUPER6 m 19.7'ULTRA12 m 39.4'MEGA20 m 65.6'Detectable objectø4 mm ø0.16" Opaque materialsSpot diameter―Environmental resistanceEnclosure ratingIEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69KAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7AccessoriesScrew nut (SUS303) x 4, toothed washer (SUS304) x 2WeightApprox. 80 g (Including cable)*1 The PX-H71 and the H71TZ are available with a 10 m 32.8' cable for both transmitter and receiver.

ModelPX-H72*1TypeM12 Thrubeam StandardLight source LEDInfrared LED (Wavelength：870 nm)Detecting distanceTURBO10 m 32.8'SUPER15 m 49.2'ULTRA30 m 98.4'MEGA40 m 131.2'Detectable objectø7.5 mm ø0.30"Opaque materialsSpot diameter―Environmental resistanceEnclosure ratingIEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69KAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7AccessoriesScrew nut (SUS303) x 4, toothed washer (SUS304) x 2WeightApprox. 90 g (Including cable)*1 The PX-H71 and the H71TZ are available with a 10 m 32.8' cable for both transmitter and receiver.

ModelPZ-B61TypeL-shaped mounting bracket (Tough)Applicable productFor the standard (square) cable typeNumber included1 unitMaterialMounting bracket: SUS304Screw: Stainless steelWeightApprox. 90 g

PZ-M11

PZ-M31

PZ-M61

ModelPZ2-42TypeDiffuse-reflective Short-rangeDetection distance100 mm 3.94" (100 x 100 mm 3.94" x 3.94" white mat paper)Light sourceRed LEDDetectable objectTransparent and opaqueHysteresis(of detecting distance)20 % max.Sensitivity adjustment1-turn trimmer (240°)Response time1 ms max.Operation modeLIGHT-ON/DARK-ON (switch-selectable)Indicator lampOutput and power*1: Red LED, Stable operation: Green LEDControl outputNPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max.Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumption35 mA or lessEnvironmental resistanceEnclosure ratingIP67Ambient lightIncandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsCase materialGlass-fiber reinforced plasticAccessoriesMounting bracket x 1, Mounting screws x 2, Plate nut x 1WeightApprox. 50 g (including 2-m 6.6' connector cable)*1 The power indicator is equipped with the PZ2-51 only.

ModelPZ2-51TypeThrubeamDetection distance7 m 23.0'Light sourceRed LEDDetectable objectOpaque material with an area of 30 mm2 or moreHysteresis(of detecting distance)-Sensitivity adjustment1-turn trimmer (240°)Response time1.5 ms max.Operation modeLIGHT-ON/DARK-ON (switch-selectable)Indicator lampOutput and power*1: Red LED, Stable operation: Green LEDControl outputNPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max.Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumptionTransmitter: 20 mA or less, Receiver: 25 mA or lessEnvironmental resistanceEnclosure ratingIP67Ambient lightIncandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsCase materialGlass-fiber reinforced plasticAccessoriesMounting bracket x 2, Mounting screws x 4, Plate nut x 2WeightApprox. 50 g (including 2-m 6.6' connector cable)*1 The power indicator is equipped with the PZ2-51 only.

ModelPZ2-61TypeRetro-reflective PolarizedDetection distance2,5 m 98.43" (with R-2)Light sourceRed LEDDetectable objectOpaque material with an area of 30 mm2 or moreHysteresis(of detecting distance)-Sensitivity adjustment1-turn trimmer (240°)Response time1 ms max.Operation modeLIGHT-ON/DARK-ON (switch-selectable)Indicator lampOutput and power*1: Red LED, Stable operation: Green LEDControl outputNPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max.Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumption35 mA or lessEnvironmental resistanceEnclosure ratingIP67Ambient lightIncandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsCase materialGlass-fiber reinforced plasticAccessoriesreflector (R-2) x 1, Mounting bracket x 1, Mounting screws x 2, Plate nut x 1WeightApprox. 50 g (including 2-m 6.6' connector cable)*1 The power indicator is equipped with the PZ2-51 only.