ModelN-R2InterfaceRS-232CCode reader power supply5 VDC ±5% (650 mA)Terminal blockInputNumber of inputs2 inputs (IN1 and IN2)Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current1 mAOutputNumber of outputs4 outputs (OUT1 to 4)Output typePhoto MOS relay outputRated load30 VDC, 100 mALeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessCommunicationspecificationsHead portNumber of inputs1 (12-pin, round connector)Supported communication standardsRS-232C compliantCommunication speed4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bpsData bit length7 or 8 bitsStop bit length1 bit or 2 bitsParity checkNone, odd, evenCommunication specificationsCommunication standardRS-232C compliantConnector1 (D-sub 9-pin connector)CommunicationspecificationsOutput interfaceTotal extension length15 m or less (including the head cable)RatingPower voltage24 VDC +10 %, -20 % Current consumption380 mA or lessEnvironmental resistanceAmbient temperature0 to +50 °C 32 to 122 °F (No freezing)Storage temperature-20 to +60 °C -4 to 140 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsWeightApprox. 135 g

ModelN-L20InterfaceEthernet*1Display I/F11-point LED display (Head RD, Head SD, Ethernet Link, Power (Capable of multi-color representation), 6 I/O terminals, Error)Code reader power supply5 VDC ±5% (650 mA)Terminal blockInputNumber of inputs2 inputs (IN1 and IN2)Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current1 mAOutputNumber of outputs4 outputs (OUT1 to 4)Output typePhoto MOS relay outputRated load30 VDC, 100 mALeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessCommunication specificationsCommunication standardEthernet: IEEE 802.3 compliant, 10BASE-T/100BASE-TXUSB: USB2.0 Full Speed compliantSupported protocolEthernet: TCP, UDP, FTP, BOOTP, EtherNet/IP®, PROFINET, KV STUDIO, MC protocol, OMRON PLC linkConnectorUSB: 1 point (Mini-B)RatingPower voltage24 VDC +10 %, -20 % Current consumption380 mA or lessEnvironmental resistanceAmbient temperature0 to +50 °C 32 to 122 °F (No freezing)Storage temperature-20 to +60 °C -4 to 140 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 0.3 mm 0.01", 2 hours in each of the X, Y, and Z directionsWeightApprox. 150 g*1 Supported protocol: TCP, UDP, FTP, BOOTP, EtherNet/IP®, PROFINET, KV STUDIO, MC protocol, OMRON PLC link.

ModelSR-H6W*1Operating SystemWindows 10 Professional or later, 32 bit/64 bitWindows 8 Professional or later, 32 bit/64 bit (Except for Windows RT)Windows 7 Professional or later, 32 bit/64 bitWindows Vista Business/Ultimate SP2 or later, 32 bit*2CPU2.0 GHz or betterMemory capacity1 GB (32 bit) / 2 GB (64 bit)Display1024 × 768 or betterNoteDVD-ROM drive (during installation)*1 .NET Framework 3.5 SP1 or later installedInternet connectivity for Windows 8/10 machines with .NET 3.5 installedControl panel operability for Windows 8/10 machines with .NET 3.5 installed*2 SR-2000/G100 products do not support Windows Vista.

ModelSR-700TypeClose-range typeLaser pointerLight sourceVisible semiconductor laser (Wavelength : 660 nm)Output60 µWPulse duration200 µsLaser classClass 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)LightingLight sourceHigh intensity red LEDReadingSupported codeBarcodeCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128,GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC,Trioptic CODE39, CODE39 Full ASCII, Pharmacode2D codeQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, Micro PDF417, GS1 Composite (CC-A, CC-B, CC-C)Minimum resolutionBarcode0.127 mm 0.005"2D codeReading distance (typical examples)Barcode30 to 100 mm 1.18" to 3.94" (Narrow bar width = 0.33 mm 0.01")2D code40 to 80 mm 1.57" to 3.15" (Cell size = 0.25 mm 0.01")Focal distance60 mm 2.36"Field of view (Typical example at focal distance)42 mm × 27 mm 1.65" × 1.06"I/OControl input2 inputs (IN1 and IN2), non-voltage input (contact, solid-state)Control output4 NPN open collector outputs (OUT1 to 4)30 mA or less (24 V or less)Residual voltage 0.8 V or less, leakage current 0.1 mA or lessRS-232CTransmission speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNo-protocol, MC protocol, SYSWAY, KV STUDIOUSBUSB 2.0 Full Speed compliantRatingPower voltage5 VDC +5 %, -10 % Current consumption630 mA or lessEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °F (No freezing)Relative humidity35 to 95 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 3 hours in each of the X, Y, and Z directionsWeightApprox. 160 g (including cable)*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.

ModelSR-710TypeMiddle-range typeLaser pointerLight sourceVisible semiconductor laser (Wavelength : 660 nm)Output60 µWPulse duration200 µsLaser classClass 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)LightingLight sourceHigh intensity red LEDReadingSupported codeBarcodeCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128,GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC,Trioptic CODE39, CODE39 Full ASCII, Pharmacode2D codeQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, Micro PDF417, GS1 Composite (CC-A, CC-B, CC-C)Minimum resolutionBarcode0.127 mm 0.005"2D code0.19 mm 0.008"Reading distance (typical examples)Barcode45 to 195 mm 1.77" to 7.68" (Narrow bar width = 0.5 mm 0.02")2D code45 to 165 mm 1.77" to 6.50" (Cell size = 0.5 mm 0.02")Focal distance100 mm 3.94"Field of view (Typical example at focal distance)70 mm × 45 mm 2.76" × 1.77"I/OControl input2 inputs (IN1 and IN2), non-voltage input (contact, solid-state)Control output4 NPN open collector outputs (OUT1 to 4)30 mA or less (24 V or less)Residual voltage 0.8 V or less, leakage current 0.1 mA or lessRS-232CTransmission speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNo-protocol, MC protocol, SYSWAY, KV STUDIOUSBUSB 2.0 Full Speed compliantRatingPower voltage5 VDC +5 %, -10 % Current consumption630 mA or lessEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °F (No freezing)Relative humidity35 to 95 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 3 hours in each of the X, Y, and Z directionsWeightApprox. 160 g (including cable)*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.

ModelSR-750TypeClose-range typeReceiverSensorCMOS Image SensorNumber of pixels752 x 480 pixelsLightingLight sourceRed LEDLaser pointerVisible semiconductor laser, Wavelength 660 nmOutput60 µWPulse duration200 µsLaser classClass 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)Reading specificationsMinimum resolution2D0.127 mm 0.005"BarcodeSupported symbol2DQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C)BarcodeGS1DataBar,CODE39,ITF,NW-7 (Codabar),CODE128,GS1-128,JAN/EAN/UPC,CODE39 FullASCII,CODE93,2of5 (Industrial 2of5),COOP 2of5,Trioptic CODE39Reading distance (typical examples)DataMatrix QR40 to 80 mm 1.58" to 3.15" (Cell size = 0.25 mm 0.01")Barcode30 to 100 mm 1.18" to 3.94" (Narrow bar width = 0.33 mm 0.013")Focal distance60 mm 2.36"Field of view (at focal distance)42.5 x 27.1 mm 1.67" x 1.07"I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mA or lessControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standard10BASE-T/100BASE-TXSupported protocolTCP/IP, FTP, SNTP, BOOTP, EtherNet/IPⓇ*2, PROFINET*3, MC protocol, KV STUDIOSerial communicationCommunication standardRS-232C compliantTransmission speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNon-procedural, MC protocol, SYSWAY, KV STUDIORatingPower voltageControl port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)*4Current consumptionControl port: 220 mA (When 24 VDC power supply is used)Ethernet port: PoE Power Class 2*5Environmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °FRelative humidity35 to 95 % RH (No condensation)Storage relative humidityOperating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directionsWeightApprox. 160 g*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 EtherNet/IPⓇ is a trademark or registered trademark of ODVA.*3 PROFINET is a trademark or registered trademark of PROFIBUS International.*4 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply meeting the following criteria:- provides Class 2 output as defined in the CEC and NEC, or- evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.*5 Peak operating current for PoE Power Class 2: 210 mA maximum.

ModelSR-751TypeMiddle-range typeReceiverSensorCMOS Image SensorNumber of pixels752 x 480 pixelsLightingLight sourceRed LEDLaser pointerVisible semiconductor laser, Wavelength 660 nmOutput60 µWPulse duration200 µsLaser classClass 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)Reading specificationsMinimum resolution2D0.19 mm 0.007"Barcode0.127 mm 0.005"Supported symbol2DQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C)BarcodeGS1DataBar,CODE39,ITF,NW-7 (Codabar),CODE128,GS1-128,JAN/EAN/UPC,CODE39 FullASCII,CODE93,2of5 (Industrial 2of5),COOP 2of5,Trioptic CODE39Reading distance (typical examples)DataMatrix QR45 to 165 mm 1.77" to 6.50" (Cell size = 0.5 mm 0.02")Barcode45 to 195 mm 1.77" to 7.68" (Narrow bar width = 0.5 mm 0.02")Focal distance100 mm 3.94"Field of view (at focal distance)70.6 x 45.0 mm 2.78" x 1.77"I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mA or lessControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standard10BASE-T/100BASE-TXSupported protocolTCP/IP, FTP, SNTP, BOOTP, EtherNet/IPⓇ*2, PROFINET*3, MC protocol, KV STUDIOSerial communicationCommunication standardRS-232C compliantTransmission speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNon-procedural, MC protocol, SYSWAY, KV STUDIORatingPower voltageControl port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)*4Current consumptionControl port: 220 mA (When 24 VDC power supply is used)Ethernet port: PoE Power Class 2*5Environmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °FRelative humidity35 to 95 % RH (No condensation)Storage relative humidityOperating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directionsWeightApprox. 160 g*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 EtherNet/IPⓇ is a trademark or registered trademark of ODVA.*3 PROFINET is a trademark or registered trademark of PROFIBUS International.*4 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply meeting the following criteria:- provides Class 2 output as defined in the CEC and NEC, or- evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.*5 Peak operating current for PoE Power Class 2: 210 mA maximum.

ModelSR-752TypeLong-range typeReceiverSensorCMOS Image SensorNumber of pixels752 x 480 pixelsLightingLight sourceRed LEDLaser pointerVisible semiconductor laser, Wavelength 660 nmOutput60 µWPulse duration200 µsLaser classClass 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)Reading specificationsMinimum resolution2D0.19 mm 0.007"0.33 mm 0.013" (When SR-75L4 is mounted)0.5 mm 0.02" (When SR-75L6 is mounted)Barcode0.17 mm 0.007"0.22 mm 0.009" (When SR-75L4 is mounted)0.33 mm 0.013" (When SR-75L6 is mounted)Supported symbol2DQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C)BarcodeGS1DataBar,CODE39,ITF,NW-7 (Codabar),CODE128,GS1-128,JAN/EAN/UPC,CODE39 FullASCII,CODE93,2of5 (Industrial 2of5),COOP 2of5,Trioptic CODE39Reading distance (typical examples)DataMatrix QR180 to 305 mm 7.09" to 12.01" (Cell size = 0.5 mm 0.02")300 to 490 mm 11.81" to 19.29" (Cell size = 0.5 mm 0.02") (When SR-75L4 is mounted)460 to 690 mm 18.11" to 27.17" (Cell size = 0.5 mm 0.02") (When SR-75L6 is mounted)Barcode180 to 330 mm 7.09" to 12.99" (Narrow bar width = 0.5 mm 0.02")250 to 540 mm 9.84" to 21.26" (Narrow bar width = 0.5 mm 0.02") (When SR-75L4 is mounted)400 to 760 mm 15.75" to 29.92" (Narrow bar width = 0.5 mm 0.02") (When SR-75L6 is mounted)Focal distance250 mm 9.84"400 mm 15.75" (When SR-75L4 is mounted)600 mm 23.62" (When SR-75L6 is mounted)Field of view (at focal distance)65.0 x 41.5 mm 2.56" x 1.63"108 x 69 mm 4.25" x 2.72" (When SR-75L4 is mounted)165 x 106 mm 6.50" x 4.17" (When SR-75L6 is mounted)I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mA or lessControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standard10BASE-T/100BASE-TXSupported protocolTCP/IP, FTP, SNTP, BOOTP, EtherNet/IPⓇ*2, PROFINET*3, MC protocol, KV STUDIOSerial communicationCommunication standardRS-232C compliantTransmission speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNon-procedural, MC protocol, SYSWAY, KV STUDIORatingPower voltageControl port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)*4Current consumptionControl port: 220 mA (When 24 VDC power supply is used)Ethernet port: PoE Power Class 2*5Environmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °FRelative humidity35 to 95 % RH (No condensation)Storage relative humidityOperating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directionsWeightApprox. 175 gApprox. 185 g (When SR-75L4/L6 is mounted)*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 EtherNet/IPⓇ is a trademark or registered trademark of ODVA.*3 PROFINET is a trademark or registered trademark of PROFIBUS International.*4 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply meeting the following criteria:- provides Class 2 output as defined in the CEC and NEC, or- evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.*5 Peak operating current for PoE Power Class 2: 210 mA maximum.

ModelSR-H7W*1*2*3Operating SystemWindows 10 Professional or higher 32-bit/64-bitWindows 8 Professional or higher 32-bit/64-bit (excluding Windows RT)Windows 7 Professional or higher 32-bit/64-bitRunning environmentProcessor 2.0 GHz or higher, Memory 8 GB or more,Required free space on hard disk 1 GB or more (space is also required for saving SR Management Tool data)DVD-ROM drive required for installation, Screen resolution 1440 × 1080 or higher*1 .NET Framework 4.6.1 or higher is installed.*2 Microsoft Visual C++ redistributable packages (x86) for Visual Studio 2015, 2017, and 2019 are installed.*3 Windows, Visual Studio, Microsoft Edge, Internet Explorer, and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

ModelSR-H8W *1*2*3Operating SystemWindows 10 Pro or later, 32 bit/64 bitWindows 8 Pro or later, 32 bit/64 bit (excluding Windows RT)Running environmentProcessor: 2.0 GHz or better, Memory: 8 GB or more, Free space on hard disk drive: 1 GB or more (free space for saving other data is also required),DVD-ROM drive: Required during installation, Screen resolution: 1440 × 1080 or higher*1 .NET Framework 4.6.1 or later must be installed.*2 Microsoft Visual C++ Redistributable Package (x86) for Visual Studio 2015, 2017, and 2019 must be installed.*3 Windows, Visual Studio, Microsoft Edge, Internet Explorer, and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

ModelSR-PN1TypePROFINET communication unitNetwork SpecificationsCompatible NetworksPROFINETCommunication Speed100 MbpsConnectorM12, 4-pin, female, D-codeSupported profileConformance Class CPower Supply SpecificationsConnector TypeIN: M12, 5-pin, male, L-code OUT: M12, 5-pin, female, L-codePower Voltage24 VDC, -20 to +25%Allowable CurrentV1, V2: Max. 16 A each; Total: 24 A *1Power ConsumptionApprox. 1.6 WEnvironmental resistanceEnclosure ratingIP65/67 (IEC 60529)Ambient temperature0 to +45°C 32°F to 113°FStorage temperature-10 to +50°C 14°F to 122°FRelative humidity35 to 85% RH (no condensation)Storage relative humidityWeightApprox. 270 g 9.53 oz*1 Use a load of 12 A or less for each of V1 and V2 and a total load of 20 A or less when using OP-88782 to OP-88787 power cables.

ModelSR-UR1Operating SystemWindows 10 Pro or later, 32 bit/64 bitWindows 8 Pro or later, 32 bit/64 bit (excluding Windows RT)Windows 7 Professional or later, 32 bit/64 bitCode reader power supply5 VDC + 5%, − 15% (peak: 700 mA)Display LEDs4 (status display, POWER, SD, RD)Head interfaceConnector1 (D-sub 9-pin connector)Communication standardRS-232C compliantCommunication speed9600, 19200, 38400, 57600, 115200 bpsData bit length7/8 bitsParity checkNone/even/oddStop bit length1/2 bitsUSBConnector1 (Mini-B)Communication standardUSB 2.0 Full SpeedInterfaceUSB-COM, USB keyboardRatingVoltage4.5 to 5.25 VCurrent consumption500 mAEnvironmental resistanceAmbient temperature−20 to +50°CStorage temperature−20 to +60°CRelative humidity20 to 95%RH (no condensation)Storage relative humidityOperating environmentNo dust or corrosive gas presentDimensions67 × 86 × 33 mmWeightApprox. 100 g

SR-XLP

ModelBL-1300TypeStandard typeTypeReading directionFrontScanning methodSingleLaserLight sourceVisible semiconductor laser (wavelength: 660 nm)Control output85 µWPulse duration112 µsLaser classClass 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)ReadingSupported codesCODE39, ITF, Industrial2of5, Standard2of5, COOP2of5, CODABAR, CODE128, GS1-128, CODE93, UPC/EAN, GS1 DataBarNumber of readable digits74 digits (148 digits for CODE128 with start character C)Readable bar width0.125 mm0.005"Reading distance65 to 500 mm 2.56" to 19.69"*2 (narrow bar width 1.0 mm 0.04")Focal point120 mm 4.72"Largest readable label width339 mm 13.35"*2 (distance: 350 mm 13.78", narrow bar width: 1.0 mm 0.04")PCS0.4 or moreScanning rate500 to 1,300 scans/sec. (in units of 100 scans)I/O specificationsInput terminalsNumber of inputs2 (IN1 and IN2)Input formatNo-voltage inputOutput terminalsNumber of outputs4 (OUT1, OUT2, OUT3, and OUT4)OutputNPN open collectorRated load24 VDC, 30 mALeakage current (at OFF)0.1 mA or lessResidual voltage (at ON)0.5 V or lessSerial interfaceCommunication methodConforms to EIA RS-232CCommunication speed600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bpsSynchronization between the transmitter and receiverAsynchronousData bit length7 or 8 bitsStop bit length1 bit or 2 bitsParity checkNone, odd, evenRatingPower voltage5 VDC ±5 % Voltage consumption400 mA or lessEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-20 to +60 °C -4 to 140 °FRelative humidity35 to 85 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsWeightApprox. 115 g*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Specifications for 500-scan/second operationUse the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1.Internal body settings are written in the internal memory area (can be rewritten 100,000 times).

ModelBL-1301TypeStandard typeTypeReading directionFrontScanning methodRasterLaserLight sourceVisible semiconductor laser (wavelength: 660 nm)Control output85 µWPulse duration112 µsLaser classClass 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)ReadingSupported codesCODE39, ITF, Industrial2of5, Standard2of5, COOP2of5, CODABAR, CODE128, GS1-128, CODE93, UPC/EAN, GS1 DataBarNumber of readable digits74 digits (148 digits for CODE128 with start character C)Readable bar width0.125 mm0.005"Reading distance65 to 500 mm 2.56" to 19.69"*2 (narrow bar width 1.0 mm 0.04")Focal point120 mm 4.72"Largest readable label width339 mm 13.35"*2 (distance: 350 mm 13.78", narrow bar width: 1.0 mm 0.04")PCS0.4 or moreScanning rate500 to 1,300 scans/sec. (in units of 100 scans)I/O specificationsInput terminalsNumber of inputs2 (IN1 and IN2)Input formatNo-voltage inputOutput terminalsNumber of outputs4 (OUT1, OUT2, OUT3, and OUT4)OutputNPN open collectorRated load24 VDC, 30 mALeakage current (at OFF)0.1 mA or lessResidual voltage (at ON)0.5 V or lessSerial interfaceCommunication methodConforms to EIA RS-232CCommunication speed600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bpsSynchronization between the transmitter and receiverAsynchronousData bit length7 or 8 bitsStop bit length1 bit or 2 bitsParity checkNone, odd, evenRatingPower voltage5 VDC ±5 % Voltage consumption400 mA or lessEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-20 to +60 °C -4 to 140 °FRelative humidity35 to 85 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsWeightApprox. 115 g*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Specifications for 500-scan/second operationUse the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1.Internal body settings are written in the internal memory area (can be rewritten 100,000 times).

ModelBL-1370TypeLong-rangeTypeReading directionFrontScanning methodSingleLaserLight sourceVisible semiconductor laser (wavelength: 660 nm)Control output85 µWPulse duration112 µsLaser classClass 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)ReadingSupported codesCODE39, ITF, Industrial2of5, Standard2of5, COOP2of5, CODABAR, CODE128, GS1-128, CODE93, UPC/EAN, GS1 DataBarNumber of readable digits74 digits (148 digits for CODE128 with start character C)Readable bar width0.15 mm 0.006"Reading distance160 to 600 mm 6.30" to 23.62"*2 (narrow bar width 1.0 mm 0.04")Focal point230 mm 9.06"Largest readable label width404 mm 15.91"*2 (distance: 420 mm 16.54", narrow bar width: 1.0 mm 0.04")PCS0.4 or moreScanning rate500 to 1,300 scans/sec. (in units of 100 scans)I/O specificationsInput terminalsNumber of inputs2 (IN1 and IN2)Input formatNo-voltage inputOutput terminalsNumber of outputs4 (OUT1, OUT2, OUT3, and OUT4)OutputNPN open collectorRated load24 VDC, 30 mALeakage current (at OFF)0.1 mA or lessResidual voltage (at ON)0.5 V or lessSerial interfaceCommunication methodConforms to EIA RS-232CCommunication speed600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bpsSynchronization between the transmitter and receiverAsynchronousData bit length7 or 8 bitsStop bit length1 bit or 2 bitsParity checkNone, odd, evenRatingPower voltage5 VDC ±5 % Voltage consumption400 mA or lessEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-20 to +60 °C -4 to 140 °FRelative humidity35 to 85 % RH (No condensation)Operating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsWeightApprox. 115 g*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Specifications for 500-scan/second operationUse the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1.Internal body settings are written in the internal memory area (can be rewritten 100,000 times).

ModelNX-C03RTypeAdvanced RFID System Extension CableApplicable productBL-1300 Series, SR-500 Series, RF-500 SeriesLength3 m 9.84'NoteThe communication units that will connect are NV-50 Series, N-R2/R4/UB/L1.

ModelNX-C05RTypeAdvanced RFID System Extension CableApplicable productBL-1300 Series, SR-500 Series, RF-500 SeriesLength5 m 16.40'NoteThe communication units that will connect are NX-50 Series, N-R2/R4/UB/L1.

ModelNX-C08RTypeAdvanced RFID System Extension CableApplicable productBL-1300 Series, SR-500 Series, RF-500 SeriesLength8 m 26.25'NoteThe communication units that will connect are NX-50 Series, N-R2/R4/UB/L1.

ModelSR-1000TypeStandard typeReceiverSensorCMOS Image SensorNumber of pixels1280 × 1024 pixelsFocusAutofocus*1Light emitterLight sourceHigh intensity red LEDPointer light sourceHigh intensity green LEDReading specificationsSupported symbol2D codeQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, Micro PDF417, GS1 Composite (CC-A, CC-B, CC-C)BarcodeCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128,GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC,Trioptic CODE39, CODE39 Full ASCII, PharmacodeMinimum resolution2D code0.063 mm 0.002"Barcode0.082 mm 0.003"Reading distance110 to 1000 4.33" to 39.37"Field of view for reading122 × 97 mm 4.80" x 3.82"(Typical example at 400 mm 15.75")I/O specificationsControl inputNumber of Inputs2Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mA or lessControl outputNumber of Outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current1 output : 50 mA or less, Total of 3 outputs : 100 mA or lessLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standardIEEE 802.3 compliant, 10BASE-T/100BASE-TXSupported protocolTCP/IP, SNTP, FTP, BOOTP, MC Protocol, Omron PLC link, KV STUDIO, EtherNet/IPⓇ, PROFINETSerial communicationCommunication standardRS-232C compliantCommunication speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNo-protocol, MC Protocol, SYSWAY, KV STUDIOUSBCommunication standardUSB 2.0 Full Speed compliantRatingPower voltage24 VDC ±10 % Current consumptionApprox. 700 mAEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °FRelative humidity35 to 85 % RH (No condensation)Storage relative humidityOperating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 0.75 mm 0.030", 3 hours in each of the X, Y, and Z directionsWeightApprox. 200 g*1 The focal position can be adjusted automatically during installation.

ModelSR-2000TypeFull-range modelReceiverSensorCMOS image sensorNumber of pixels2048 × 1536FocusAuto*1Light emitterLight sourceHigh-intensity red LEDPointer light sourceHigh-intensity green LEDReading specificationsSupported symbol2D codeQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C), DotCodeBarcodeCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal (Japan Postal, IMB)Minimum resolution2D code0.040 mm 0.0016"Barcode0.082 mm 0.0032"Reading distance100 to 2000 mm 3.94" to 78.74"Field of view for readingat 800 mm 31.50": 263 × 197 mm 10.35" × 7.76"I/O specificationsControl inputNumber of Inputs2Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mAControl outputNumber of Outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load currentSingle output: 50 mA or less, 3-output total: 100 mA or lessLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standardIEEE 802.3-compliant, 10BASE-T/100BASE-TXSupported protocolTCP/IP, SNTP, FTP, BOOTP, EtherNet/IPⓇ, PROFINET, KV STUDIO, MC Protocol, OMRON PLC LinkSerial communicationCommunication standardRS-232C-compliantCommunication speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNo-protocol, KV STUDIO, MC protocol, SYSWAYUSBCommunication standardUSB 2.0 Full Speed-compliantRatingPower voltage24 VDC ±10 % Current consumptionApprox. 1,600 mAEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °FRelative humidity35 to 85 % RH (No condensation)Storage relative humidityOperating environmentNo dust or corrosive gas presentVibration resistance10 to 55 Hz: Double amplitude 0.75 mm 0.03", 3 hours each in X, Y and Z directionsWeightApprox. 300 g*1 The focal position can be adjusted automatically during installation or tuning.

ModelSR-20ALTypeLighting attachmentApplicable productSR-2000 SeriesNotePackage content: Lighting attachment × 1, Screw (M3) × 2

ModelSR-5000*1ReceiverSensorCMOS image sensorNumber of pixels2448 × 2048 pixels(5.0 megapixels)FocusAuto*2Light emitterLight source48 high-intensity white LEDsPointer light source2 high-intensity green LEDsLED classRisk Group 1 (IEC 62471)Reading specificationsSupported symbol2D codeQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C), DotCode, MaxiCode, AztecCodeBarcodeCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar,CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 (Full ASCII), Pharmacode, Postal (Japan Postal, IMB)Minimum resolution2D code0.060 mm 0.002"Barcode0.10 mm 0.004"Reading distance100 to 2000 mm 3.94" to 78.74"I/O specificationsControl inputNumber of Inputs3Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage8 V DCMaximum OFF current0.2 mAControl outputNumber of Outputs4Output typePhotoMOS relay outputMaximum rating30 VDCMaximum load currentSingle output: 50 mA or less, 4-output total: 100 mA or lessLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standard1000BASE-T/100BASE-TXSupported protocolTCP/IP, SNTP, FTP, BOOTP, EtherNet/IPⓇ, PROFINET, KV STUDIO, MC protocol, OMRON PLC linkSerial communicationCommunication standardRS-232C compliantCommunication speed600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bpsSupported protocolNo protocol, KV STUDIO, MC protocol, SYSWAYUSBCommunication standardUSB 2.0 High Speed compliantRatingsPower voltage24 VDC ±10%Current consumptionApprox. 1800 mAEnvironmental resistanceEnclosure ratingIP65Ambient lightSunlight:10000 lux, Incandescent light: 6000 lux, Fluorescent light: 2000 luxAmbient temperature0 to 45°C 32 to 113°FStorage temperature-10 to 50°C 14 to 122°FRelative humidity35 to 85% RH (no condensation)Storage relative humidityOperating environmentNo dust, no corrosive gasVibration resistance10 to 55 Hz: Double amplitude 0.3 mm 0.01"/ 2 hours each in X, Y, and Z directionsWeightApprox. 3.0 kg*1 ROM rewrites: 100,000*2 The focus position can be automatically adjusted during installation or tuning.

SR-50AP

ModelSR-X100 *1*2TypeStandard type (1.4 megapixels)ReceiverSensorCMOS image sensorNumber of pixels1360 × 1024FocusAuto*3EmitterIllumination light sourceHigh-intensity red LED*4Pointer light sourceHigh-intensity green LED*4Reading specificationsSupported symbols2D codesQR, MicroQR, DataMatrix(ECC200), DMRE, GS1 DataMatrix, PDF417, MicroPDF417,GS1 Composite (CC-A/CC-B/CC-C), DotCode, Maxi Code, Aztec CodeBarcodesCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93,JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal (Japan Postal, IMB)Minimum resolution2D codes0.024 mm 0.0009"Barcodes0.082 mm 0.0032"Reading distance70 to 1000 mm 2.76" to 39.37"Reading field of view74 × 55 mm 2.91" × 2.17"(at a distance of 300 mm 11.81")I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating30 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mAControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current50 mA or less for 1 output, or 100 mA or less in total for 3 outputsLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standardIEEE 802.3-compliant 100BASE-TXSupported protocolsTCP/IP, SNTP, FTP, SFTP, HTTP, HTTPS, BOOTP, EtherNet/IP®, PROFINET, KV STUDIO, MC protocol, OMRON PLC linkSerial communicationCommunication standardRS-232C-compliantCommunication speed600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bpsSupported protocolsNo-protocol, KV STUDIO, MC protocol, SYSWAYUSBCommunication standardUSB 2.0 High Speed compliantRatingsPower voltage24 VDC +25%/-20%Current consumptionApprox. 650 mAEnvironmental resistanceEnclosure ratingIP65/IP67 (IEC60529)*5Ambient temperature0 to +45°C 32 to 113°FStorage temperature-10 to +50°C 14 to 122°FRelative humidity35 to 85% RH (No condensation)Storage relative humidityWeightApprox. 180 g 6.35 oz*1 SR-X100 series does not support the AI filter function.*2 System ROM rewrites: 100000*3 The focal position can be adjusted automatically during installation or tuning.*4 LEDs and lamps are classified as shown below according to IEC 62471 (JIS C 7550).• Exempt group: Objects that do not cause any photobiological damage.• Risk group 1 (low risk): Objects that do not cause damage that makes constraints on normal actions necessary.• Risk group 2 (moderate risk): Objects that do not cause damage accompanied by unpleasant feelings and thermal discomfort.• Risk group 3 (high risk): Objects that cause damage even due to temporary or short-term exposure.The risk groups for this product are listed below.Pointer light source (Green): Risk group 1Illumination light source (Red): Risk group 1Illumination light source (White), Advance only: Risk group 1*5 Attach a USB port cover to meet the protective structural specification.

ModelSR-X300 *1TypeSR-X300: Standard type (2.3 megapixels)SR-X300 + SR-XHR: High-resolution typeReceiverSensorCMOS image sensorNumber of pixels1920 × 1200FocusAuto*2EmitterIllumination light sourceHigh-intensity red/white LED*3Pointer light sourceHigh-intensity green LED*3Reading specificationsSupported symbols2D codesQR, MicroQR, DataMatrix(ECC200), DMRE, GS1 DataMatrix, PDF417, MicroPDF417,GS1 Composite (CC-A/CC-B/CC-C), DotCode, Maxi Code, Aztec CodeBarcodesCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93,JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal (Japan Postal, IMB)Minimum resolution2D codesSR-X300: 0.024 mm 0.0009"SR-X300 + SR-XHR: 0.010 mm 0.0004"Barcodes0.082 mm 0.0032"Reading distanceSR-X300: 70 to 1000 mm 2.76" to 39.37"SR-X300 + SR-XHR: 32 to 47 mm 1.26" to 1.85"Reading field of viewSR-X300: 104 × 65 mm 4.09" × 2.56"(at a distance of 300 mm 11.81")SR-X300 + SR-XHR: 12.3 × 7.7 mm 0.48" × 0.30"(at a distance of 47 mm 1.85")I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating30 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mAControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current50 mA or less for 1 output, or 100 mA or less in total for 3 outputsLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standardIEEE 802.3-compliant 100BASE-TXSupported protocolsTCP/IP, SNTP, FTP, SFTP, HTTP, HTTPS, BOOTP, EtherNet/IP®, PROFINET, KV STUDIO, MC protocol, OMRON PLC linkSerial communicationCommunication standardRS-232C-compliantCommunication speed600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bpsSupported protocolsNo-protocol, KV STUDIO, MC protocol, SYSWAYUSBCommunication standardUSB 2.0 High Speed compliantRatingsPower voltage24 VDC +25%/-20%Current consumptionApprox. 750 mAEnvironmental resistanceEnclosure ratingIP65/IP67 (IEC60529)*4Ambient temperature0 to +45°C 32 to 113°FStorage temperature-10 to +50°C 14 to 122°FRelative humidity35 to 85% RH (No condensation)Storage relative humidityWeightSR-X300: Approx. 200 g 7.06 ozSR-X300 + SR-XHR: Approx. 225 g 7.94 oz*1 System ROM rewrites: 100000*2 The focal position can be adjusted automatically during installation or tuning.*3 LEDs and lamps are classified as shown below according to IEC 62471 (JIS C 7550).• Exempt group: Objects that do not cause any photobiological damage.• Risk group 1 (low risk): Objects that do not cause damage that makes constraints on normal actions necessary.• Risk group 2 (moderate risk): Objects that do not cause damage accompanied by unpleasant feelings and thermal discomfort.• Risk group 3 (high risk): Objects that cause damage even due to temporary or short-term exposure.The risk groups for this product are listed below.Pointer light source (Green): Risk group 1Illumination light source (Red): Risk group 1Illumination light source (White), Advance only: Risk group 1*4 Attach a USB port cover to meet the protective structural specification.

SR-XESD

ModelOP-51580TypeMiniB USB CableLength2 m 6.56'NoteIncluded with the NR-600/NR-500.

OP-80616