The DAP - 04 series is a converter that converts DALI signals into PWM signals. It is especially effective when used with MEAN WELL's AC - DC light strip power supplies with three - in - one dimming functions (1 - 10Vdc/PWM signal/resistor).

The ERG - 5000 series is a grid - connected energy recovery inverter, providing a rated input of 5kW and a maximum input of 6kW, with a maximum efficiency of up to 91%. CC and CV modes are selectable. With a 4 - input - channel design, the channels can be used independently or connected in series or parallel, offering flexible combinations for various applications. In addition, the ERG - 5000 also provides remote control and monitoring functions, using CMU2A or CANBus protocol for data analysis and remote monitoring. The ERG - 5000 offers an input voltage range of 10 - 60VDC, and the ERG - 5000H

The ERS - 1400 series is a DC energy recovery power supply device with a rated input of 1400W, and its maximum efficiency can reach 91%. It offers selectable CC (Constant Current) and CV/CP (Constant Voltage/Constant Power) modes. With a design of 4 input channels, they can be used independently or connected in series or parallel, providing flexible combinations for various applications. In addition, the system also provides remote control and monitoring functions, using the CMU2A or CANBus protocol for data analysis and remote monitoring. The ERS - 1400 provides an input voltage of 10 - 60VDC, and the ERS - 1400H （the content is incomplete here, unable to translate the rest ）

The KAA - 8R universal switch actuator has 8 independent channels built - in. Each channel output uses high - quality independent relays to meet switch and window control or any other mixed applications. With a small - size design and a width of only 4SU (72mm), it is very suitable for installation in KNX/EIB applications on 35mm DIN rails. This actuator is connected to the KNX bus through dedicated bus connection terminals. The new version complies with the KNX regulation "KNX Data Secure". "KNX Data Secure" can prevent building automation from being remotely manipulated and can be configured for enabling in ETS. The built - in switch relays are very suitable for inductive loads, capacitive loads, and LED lighting on - off control, and are also suitable for resistive loads, such as the motor control of electric windows.

The LCM25KN series is a 25W AC/DC constant - current LED driver. The output current level can be set via DIP switches, and it has a built - in KNX interface to directly connect to the KNX system, eliminating the need for expensive KNX - DALI gateways. Models in this series can operate within a voltage range of 180 - 277VAC, and the current level can be set in the range of 350mA - 1050mA. Thanks to its high - efficiency of over 85% and passive cooling design, the entire series of models can operate reliably within a temperature range of - 30°C to + 85°C. In addition, the LCM25KN series also provides open - loop dimming and synchronous dimming control functions, thus offering lighting system integration with high flexibility.

The LCM - 40KN series is a 40W AC/DC constant - current LED driver. The output current level can be set via DIP switches, and it has a built - in KNX interface for direct connection to the KNX system, eliminating the need for expensive KNX - DALI gateways. Models in this series can operate within a voltage range of 180 - 295VAC, and the current level can be set in the range of 350mA - 1050mA. Thanks to its high - efficiency of over 90% and passive cooling design, the entire series of models can operate reliably within a temperature range of - 30°C to + 90°C. In addition, the LCM - 40KN series also provides open - loop dimming and synchronous dimming control functions, thus offering high flexibility for lighting system integration.

The LCM - 60KN series is a 60W AC/DC constant - current LED driver. The output current level can be set via DIP switches, and it has a built - in KNX interface for direct connection to the KNX system, eliminating the need for expensive KNX - DALI gateways. Models in this series can operate within a voltage range of 180 - 295VAC, and the current level can be set in the range of 500mA - 1400mA. Thanks to its high - efficiency of over 91% and passive cooling design, the entire series of models can operate reliably within a temperature range of - 30°C to + 90°C. In addition, the LCM - 60KN series also provides open - loop dimming and synchronous dimming control functions, thus offering flexibility for LED lighting system integration.

The DAP - 04 series is a converter that converts DALI signals into PWM signals. It is especially effective when used with MEAN WELL's AC - DC light strip power supplies with three - in - one dimming functions (1 - 10Vdc/PWM signal/resistor).

The DLC - 02 - KN is a KNX to DALI gateway that can perform signal conversion between the DALI system and the KNX system. This device converts switch and dimming commands from the KNX system into DALI commands, and feedbacks the switch status and dimming status from the DALI bus back to the KNX system. Through two independent DALI buses, the DLC - 02 - KN can connect up to 128 DALI actuators. The DLC - 02 - KN can directly supply power to the DALI bus, so there is no need for an additional DALI line power supply. This device has multiple built - in illuminators, which are applicable to non - professional lighting control scenarios.In addition, the DLC - 02 - KN is equipped with many functions. The Sequence function allows users to customize multiple brightness values and color changes with a periodicity of 1 - 255 cycles or an infinite cycle, which is very suitable for entertainment and lighting applications. The DLC - 02 - KN has a built - in battery. Even if the AC power is cut off, the device's time and operation will continue to run. DLC - 02 - KN is applicable to scenarios where the time is relevant, so it can be used for time - setting applications, such as implementing loop operations and motion control. Besides, in combination with the KNX switch actuator (like KAA - 8R - S), it can achieve the function of turning off the lighting when the standby switch - off condition is met. When all DALI devices are turned off, the DLC - 02 - KN can notify the KNX controller (KBA - DALI) to control the AC input to enter a standby state.

The ERG - 5000 series is a grid - connected energy recovery inverter, providing a rated input of 5kW and a maximum input of 6kW, with a maximum efficiency of up to 91%. CC and CV modes are selectable. With a 4 - input - channel design, the channels can be used independently or connected in series or parallel, offering flexible combinations for various applications. In addition, the ERG - 5000 also provides remote control and monitoring functions, using CMU2A or CANBus protocol for data analysis and remote monitoring. The ERG - 5000 offers an input voltage range of 10 - 60VDC, and the ERG - 5000H

The ERS - 1400 series is a DC energy recovery power supply device with a rated input of 1400W, and its maximum efficiency can reach 91%. It offers selectable CC (Constant Current) and CV/CP (Constant Voltage/Constant Power) modes. With a design of 4 input channels, they can be used independently or connected in series or parallel, providing flexible combinations for various applications. In addition, the system also provides remote control and monitoring functions, using the CMU2A or CANBus protocol for data analysis and remote monitoring. The ERS - 1400 provides an input voltage of 10 - 60VDC, and the ERS - 1400H （the content is incomplete here, unable to translate the rest ）

The ERG - 5000 series is a grid - connected energy recovery inverter, providing a rated input of 5kW and a maximum input of 6kW, with a maximum efficiency of up to 91%. CC and CV modes are selectable. With a 4 - input - channel design, the channels can be used independently or connected in series or parallel, offering flexible combinations for various applications. In addition, the ERG - 5000 also provides remote control and monitoring functions, using CMU2A or CANBus protocol for data analysis and remote monitoring. The ERG - 5000 offers an input voltage range of 10 - 60VDC, and the ERG - 5000H

The KAA - 4RV - S dimming actuator has 4 independent channels built - in, and each channel output uses high - quality bistable (locked) relays, which is suitable for matching with various LED driver power supplies of MEAN WELL brand. The product specifications clearly indicate the maximum recommended number of LED driver power supplies for each channel, facilitating system designers to configure and plan LED luminaires for building projects. Based on the KNX architecture, KNX system engineers can easily perform programming and configuration according to users' needs or system specifications when planning and using the system. The KAA - 4RV - S dimming actuator has 4 green LED indicators on its front - panel buttons to show the on/off status. With a miniaturized module design of only 4SU (72mm) in width, it greatly reduces the installation space requirements and can be quickly installed on a 35mm standard rail. This device is connected to the KNX bus through dedicated bus connection terminals. The new version meets the KNX regulation "KNX Data Secure". "KNX Data Secure" can prevent building automation from being remotely manipulated and can be enabled and configured in ETS. Each channel of this product has a built - in "KNX Dimming Curve 0(1)" - 10V digital dimming control function, and the dimming curve can be selected as linear or logarithmic, providing users with an excellent dimming experience. Similarly, it is also very suitable for matching with various motion sensors in building control applications to achieve full - function control. This dimming actuator is powered by the EIB/KNX bus, without the need for additional power supply, and has multiple functions and high reliability, which can meet the current needs of modern building design in various aspects.

The KAA - 8R universal switch actuator has 8 independent channels built - in. Each channel output uses high - quality independent relays to meet switch and window control or any other mixed applications. With a small - size design and a width of only 4SU (72mm), it is very suitable for installation in KNX/EIB applications on 35mm DIN rails. This actuator is connected to the KNX bus through dedicated bus connection terminals. The new version complies with the KNX regulation "KNX Data Secure". "KNX Data Secure" can prevent building automation from being remotely manipulated and can be configured for enabling in ETS. The built - in switch relays are very suitable for inductive loads, capacitive loads, and LED lighting on - off control, and are also suitable for resistive loads, such as the motor control of electric windows.

The KAA - 8R universal switch actuator has 8 independent channels built - in. Each channel output uses high - quality independent relays to meet switch and window control or any other mixed applications. With a small - size design and a width of only 4SU (72mm), it is very suitable for installation in KNX/EIB applications on 35mm DIN rails. This actuator is connected to the KNX bus through dedicated bus connection terminals. The new version complies with the KNX regulation "KNX Data Secure". "KNX Data Secure" can prevent building automation from being remotely manipulated and can be configured for enabling in ETS. The built - in switch relays are very suitable for inductive loads, capacitive loads, and LED lighting on - off control, and are also suitable for resistive loads, such as the motor control of electric windows.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60E is a 60W AC - DC class II (without FG) external power supply with moisture - resistant features. The plastic shell is filled with silicone inside to improve heat dissipation. Meanwhile, it enables the main body of the OWA - 60E to reach an IP67 protection rating, making this series a dedicated external power supply for applications requiring moisture resistance, humidity resistance, and dust prevention. The OWA - 60E complies with the latest energy - efficiency requirements and meets EU ErP and Code of Conduct (CoC) Version 5. The no - load loss is less than 0.15W. It has passed the EN61558 - 2 - 16 certification, and selected models can also meet EN60335 - 1, which can simplify the design of home appliance and similar application systems.The OWA - 60E uses an input voltage range of 90VAC - 264VAC, has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60U is a 60W single - output external LED power supply series. It adopts a North American - style AC plug and a globally - compatible DC connector. Its working mode is similar to that of an adapter. Simply connecting it to an LED luminaire is sufficient without the need for additional wires. The entire series has UL finished product certification and can operate in both dry and humid environments. The OWA - 60U is designed as class II (without FG). Its outer shell is made of 94V - 0 fire - rated flame - retardant plastic, and the interior is filled with silicone to enhance heat dissipation. It has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60U is a 60W single - output external LED power supply series. It adopts a North American - style AC plug and a globally - compatible DC connector. Its working mode is similar to that of an adapter. Simply connecting it to an LED luminaire is sufficient without the need for additional wires. The entire series has UL finished product certification and can operate in both dry and humid environments. The OWA - 60U is designed as class II (without FG). Its outer shell is made of 94V - 0 fire - rated flame - retardant plastic, and the interior is filled with silicone to enhance heat dissipation. It has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60U is a 60W single - output external LED power supply series. It adopts a North American - style AC plug and a globally - compatible DC connector. Its working mode is similar to that of an adapter. Simply connecting it to an LED luminaire is sufficient without the need for additional wires. The entire series has UL finished product certification and can operate in both dry and humid environments. The OWA - 60U is designed as class II (without FG). Its outer shell is made of 94V - 0 fire - rated flame - retardant plastic, and the interior is filled with silicone to enhance heat dissipation. It has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60U is a 60W single - output external LED power supply series. It adopts a North American - style AC plug and a globally - compatible DC connector. Its working mode is similar to that of an adapter. Simply connecting it to an LED luminaire is sufficient without the need for additional wires. The entire series has UL finished product certification and can operate in both dry and humid environments. The OWA - 60U is designed as class II (without FG). Its outer shell is made of 94V - 0 fire - rated flame - retardant plastic, and the interior is filled with silicone to enhance heat dissipation. It has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60U is a 60W single - output external LED power supply series. It adopts a North American - style AC plug and a globally - compatible DC connector. Its working mode is similar to that of an adapter. Simply connecting it to an LED luminaire is sufficient without the need for additional wires. The entire series has UL finished product certification and can operate in both dry and humid environments. The OWA - 60U is designed as class II (without FG). Its outer shell is made of 94V - 0 fire - rated flame - retardant plastic, and the interior is filled with silicone to enhance heat dissipation. It has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.

The OWA - 60U is a 60W single - output external LED power supply series. It adopts a North American - style AC plug and a globally - compatible DC connector. Its working mode is similar to that of an adapter. Simply connecting it to an LED luminaire is sufficient without the need for additional wires. The entire series has UL finished product certification and can operate in both dry and humid environments. The OWA - 60U is designed as class II (without FG). Its outer shell is made of 94V - 0 fire - rated flame - retardant plastic, and the interior is filled with silicone to enhance heat dissipation. It has an operating efficiency of up to 91%, uses natural air cooling, and has an operating temperature range of - 35°C to + 70°C.