The Bently Nevada 3500 Bentley module is used for vibration monitoring of large and medium-sized rotating machinery such as steam turbines, compressors, fans, pumps, coal mills, gearboxes, motors, etc., and is widely used in many industries such as steel, electric power, metallurgy, chemical, petrochemical, etc.

The 3500 Internal Barrier is an intrinsically safe interface that provides explosion protection for sensor systems directly connected to the 3500 Machinery Protection System.The internal barrier is fully compatible with the 3500 system, providing a convenient and cost-effective solution for installing all types of transducer systems in hazardous areas.The internal barriers of the 3500 rack are integrated in special monitor I/O modules.These barriers provide explosion protection for sensor systems connected to the 3500 system. The intrinsically safe (IS) grounding module provides an IS grounding connection through the 3500 system backplane.The IS Earth Module requires a dedicated I/O module location and it is forbidden to use this monitor location for other 3500 system modules. This limits the standard 19-inch rack to 13 monitor positions.

Bently 3500/05 frame common model3500/05-01-01-00-00-013500/05-01-02-00-00-013500/05-02-04-00-00-013500/05-01-01-00-00-003500/05-01-02-00-00-003500/05-02-04-00-00-00The Bently 3500 frame is used to install all the monitor modules and frame power supplies. It provides backplane communication for the 3500 frames to communicate with each other and provides the required power to each module.The 3500 frame is available in two sizes:1 Full-size frame – 19" EIA frame with 14 module slots available2 Mini frame – 12-inch frame with 7 module slots availableThe 3500 frame is available in three order forms:1 Panel Mounting – Mount the 3500 frame in a rectangular opening in the panel and fasten it with the clamps provided with the frame. Wiring and accessing I/O modules from the back of the frame.2 Frame Mounting – Mount the 3500 frame in a 19" EIA rail. Wiring and accessing I/O modules from the back of the frame.3 Wall Plate Mounting – Mounts the 3500 frame on a wall or in a panel that cannot be attached from the back. Wiring and accessing I/O modules from the front of the frame. The 3500/05 Mini frame does not have this option.The power supply and frame interface modules must be installed in the two leftmost slots. The remaining 14 frame positions (or the remaining 7 for mini frames) can be used to install any module.Bently 3500/05 frame ordering information3500/05-AXX-BXX-CXX-DXX-EXXA Frame size: 0 1 19 inch frame (14 module slots)0 2 12" miniature frame (7 module slots)B Mounting Options: 0 1 panel mounting options, full size frame0 2 Frame Mounting Options, Full Size Frame (Mounted in 19" EIA Frame)0 3 Wall Plate Mounting Options (not available for miniature frames)0 4 Panel Mounting Options, Miniature Frame0 5 Frame Mounting Options, Miniature Frame

Bently 3500/15 ordering information and model descriptions are as follows:3500/15-AXX-BXX-CXX option descriptionA: Power supply type (upper notch)01 Low Voltage AC (85-132 Vac rms)02 High Voltage AC (175-264 Vac rms)03 High Voltage DC (88-140 Vdc)04 Low Voltage DC (20-30 Vdc)05 Universal AC Power Supply (85-264 Vac rms) (NEW)B: Power supply type (lower notch)00 No power supply (only for cases where a single power supply is required)01 Low Voltage AC (85-132 Vac rms)02 High Voltage AC (175-264 Vac rms)03 High Voltage DC (88-140 Vdc)04 Low Voltage DC (20-30 Vdc)05 Universal AC Power Supply (85-264 Vac RMS) (New)C: Approve unit options00 None01 CSA/NRTL/C02 ATEX/IECEx/CSA (Class 1, Zone 2)CN ChinaThe specific models are as follows:3500/15 (Front Panel 127610-01, Rear Panel 125840-01)3500/15-02-02-00, upper notch & lower notch are installed, so it is dual power supply,3500/15-02-00-00, the upper slot is installed, the lower slot is not installed, so it is a single power supply3500/15-05-05-00, upper notch & lower notch are installed, so it is a dual power supply

Bently 3500/15-05-00-00 is a universal AC power supply, installed in the Bently 3500/05 frame power supply, used for steam turbines, compressors, fans, pumps, coal mills, gearboxes, motors and other large and medium-sized rotating machinery vibration monitoring, widely used in steel, electric power, metallurgy, chemical, petrochemical and many other industries. The Bently 3500/15 power module is a low-profile module and must be installed in the leftmost slot of the Bently 3500/05 frame. The 3500/05 frame can be fitted with one or two AC AC or DC DC power modules in any combination; Each power module can supply power to the entire frame individually. If two power modules are installed, they are one primary and one standby. When two power supplies are installed in a single rack, the lower slot is used as the main power supply, and the other slot is located in the upper slot as a backup power supply. As long as the standby power module is installed, plugging and unplugging the main power module will not interrupt the operation of the frame. The 3500 power module accepts a wide range of input voltages and converts them to the operating voltage acceptable to the 3500 module. The 3500 monitoring system provides 3 types of power modules: 1. AC power; 2. High voltage DC power supply; 3. Low-voltage DC power supply universal AC power supply and PIM (power input module) are not compatible with traditional 3500 AC power supply, high-voltage AC PIM and low-voltage AC PIM. High voltage and low voltage DC power supplies and PIM (Power Entry Module) are not compatible with the traditional 3500 high voltage and low voltage DC power supplies and PIM.

Bently 3500/15 ordering information and model descriptions are as follows:3500/15-AXX-BXX-CXX option descriptionA: Power supply type (upper notch)01 Low Voltage AC (85-132 Vac rms)02 High Voltage AC (175-264 Vac rms)03 High Voltage DC (88-140 Vdc)04 Low Voltage DC (20-30 Vdc)05 Universal AC Power Supply (85-264 Vac rms) (NEW)B: Power supply type (lower notch)00 No power supply (only for cases where a single power supply is required)01 Low Voltage AC (85-132 Vac rms)02 High Voltage AC (175-264 Vac rms)03 High Voltage DC (88-140 Vdc)04 Low Voltage DC (20-30 Vdc)05 Universal AC Power Supply (85-264 Vac RMS) (New) C: Approve unit options00 None01 CSA/NRTL/C02 ATEX/IECEx/CSA (Class 1, Zone 2)CN ChinaThe specific models are as follows:3500/15 (Front Panel 127610-01, Rear Panel 125840-01)3500/15-02-02-00, upper notch & lower notch are installed, so it is dual power supply,3500/15-02-00-00, the upper slot is installed, the lower slot is not installed, so it is a single power supply3500/15-05-05-00, upper notch & lower notch are installed, so it is a dual power supply

Bently 3500/22M transient data interfaceCommonly used models3500/22-01-01-003500/22-01-01-01The 3500 Transient Data Interface (TDI) is the interface between the 3500 Monitoring System and Bently Nevada System 1TM machinery management software. TDI combines the functionality of the 3500/20 Framework Interface Module (RIM) with a communication processor such as TDXnet. TDI operates in RIM slots in the 3500 frame and works with M-Series monitors (3500/40M, 3500/42M, etc.) to continuously acquire steady-state and transient waveform data and transmit the data to host computer software via Ethernet. TDI has standard static data acquisition, but with an optional channel-enable disk, transient or dynamic data can also be acquired. Compared with the previous communication processor, TDI has several other improvements in addition to integrating the functions of the communication processor into the 3500 framework. TDI provides common functionality for all frameworks, but is not a group of critical monitoring channelspart, without affecting the correct and routine operation of the entire monitoring system. Each frame requires one TDI or RIM. TDI occupies only one slot in the frame and must be in the first slot (immediately next to the power module). For Triple Module Redundancy (TMR) applications, the 3500 system requires TDI in the form of TMR. In addition to all the standard TDI features, the TMR TDI also features a "Monitor Channel Comparison Function". Install the feature by selecting the monitor option, 3500The TMR configuration performs the function of monitoring and voting. In this way, the TMR TDI continuously compares the outputs of three redundant monitors. If TMR TDI detects that the output of one of the monitors is not equal to the other two monitors (within the percentage of configuration), it sends an error indication to the monitor and adds an event to the system event list.Spare parts138607-01 Standard Transient Data Interface Module138607-02 TMR Transient Data Interface Module146031-01 10/100 Base T I/O Module.()146031-02 100 Base FX (Optical) Input/Output Module.()147364-01 3500 buffer signal output module.()161580-01 3500/22M TDI Operation and Maintenance Manual00580441 Connector, internal terminal, 3-pos., green00580436 Connector, internal terminal, 6-pos., greenHost computer to 3500 frame cable, RS232 130118

Bently 3500/22M transient data interfaceCommonly used models3500/22-01-01-003500/22-01-01-01The 3500 Transient Data Interface (TDI) is the interface between the 3500 Monitoring System and Bently Nevada System 1TM machinery management software. TDI combines the functionality of the 3500/20 Framework Interface Module (RIM) with a communication processor such as TDXnet. TDI operates in RIM slots in the 3500 frame and works with M-Series monitors (3500/40M, 3500/42M, etc.) to continuously acquire steady-state and transient waveform data and transmit the data to host computer software via Ethernet. TDI has standard static data acquisition, but with an optional channel-enable disk, transient or dynamic data can also be acquired. Compared with the previous communication processor, TDI has several other improvements in addition to integrating the functions of the communication processor into the 3500 framework. TDI provides common functionality for all frameworks, but is not a group of critical monitoring channelspart, without affecting the correct and routine operation of the entire monitoring system. Each frame requires one TDI or RIM. TDI occupies only one slot in the frame and must be in the first slot (immediately next to the power module). For Triple Module Redundancy (TMR) applications, the 3500 system requires TDI in the form of TMR. In addition to all the standard TDI features, the TMR TDI also features a "Monitor Channel Comparison Function". Install the feature by selecting the monitor option, 3500The TMR configuration performs the function of monitoring and voting. In this way, the TMR TDI continuously compares the outputs of three redundant monitors. If TMR TDI detects that the output of one of the monitors is not equal to the other two monitors (within the percentage of configuration), it sends an error indication to the monitor and adds an event to the system event list.Spare parts138607-01 Standard Transient Data Interface Module138607-02 TMR Transient Data Interface Module146031-01 10/100 Base T I/O Module.()146031-02 100 Base FX (Optical) Input/Output Module.()147364-01 3500 buffer signal output module.()161580-01 3500/22M TDI Operation and Maintenance Manual00580441 Connector, internal terminal, 3-pos., green00580436 Connector, internal terminal, 6-pos., greenHost computer to 3500 frame cable, RS232 130118

Bently 3500/25 improved keyphasor moduleCommonly used models3500/25-01-01-003500/25-02-01-003500/25-01-03-003500/25-01-01-013500/25-02-01-013500/25-01-03-01The improved keyphasor module is an updated and upgraded 3500 System Module. It extends the key phase signal processing capabilities while retaining the form of the existing key phase.3500/25 The improved key phase module is a half-height, 2-channel module used to provide the key phase signal to the monitor module in the 3500 frame. The module receives an input signal from an eddy-current sensor or electromagnetic sensor and converts this signal into a digital key phase signal that indicates when a key phase mark on the shaft passes through the key phase probe. The 3500 mechanical protection system can receive 4 key phase signals.

Bently 3500/32 relay moduleCommonly used models3500/32-01-003500/32-01-01The Bently 3500 four-channel relay module provides the output of four relays. Any number of 4-channel relay modules can be placed in any of the slots to the right of the frame interface module. Each output of the 4-channel relay module can be programmed independently to execute the required voting logic. Each relay used in a 4-channel relay module has an "alarm drive logic". This alarm actuation logic can be programmed with "and" and "or gate" logic and can utilize the alarm input (warning or hazard) provided by any monitor channel in the frame or a combination of any of the monitor channels. The alarm-driven logic application framework is configured with software programming to meet the specific needs of the application.3500/32 -AXX-BXXDescription of the optionA: Output module 0 1 4 channel relay I/O moduleB: Approve the Institution Option0 0 No 0 1 CSA/NRTL/CSpare parts125712-01 4 Channel Relay Module Spare Part.()125720-01 4 Channel Relay I/O Module Spare Part04425545 Grounding Bracelet (Single Purpose)132319-01 TOUGHNESS IC04400037 IC removal tool00580436 connector, internal terminal, 6-pos., green129771-01 4-Channel Relay Module ManualIn addition to any alarm relay, a universal system OK Relay 2 is also available in the frame. This relay is located in the RIM and is connected to the OK circuit of all modules in the frame. These circuits monitor the operating status of each module. The OK relay will notify you of any malfunction in the field wiring of the module and its sensors or associated sensors, which is a single pole double throw (SPDT) type, usually live, and provides an additional notification function when the main power supply fails.

The 3500/33 16-channel relay module is a full-height module that provides 16 relay outputs.You can place any number of 16-channel relay modules in any slot to the right of the transient data interface (TDI) module.Each output of the 3500/33 16-channel relay module can be independently programmed to execute voting logic.Each relay of the module contains alarm drive logic.Alarm driver logic is programmed using AND and OR logic, and the following can be used! Alarm Inputs (Alarm and Danger Status)Indeterminate statusA single measurement variable from any monitoring channel or any combination of monitoring channels on a rack can be programmed using the 3500 rack configuration software.

The Bently 3500/40 Proximitor monitor is a 4-channel monitor that takes input from and utilizes the Proximitor sensor. to drive the warning device. The 3500/40 Proximitor monitors can be programmed with the 3500 Rack Configuration Software to perform any of the following functions: radial vibration, axial displacement, eccentricity, and differential expansion. The main purpose of the Model 3500/40 monitor is to provide: continuous comparison of the current machine vibration value with the set warning value, so as to sound an alarm and achieve machine protection; 2) Machine vibration information required by operators and maintenance personnel. Warning setpoints can be configured using the 3500 Rack Configuration Software. Alarm setpoints can be configured for each valid proportional value, and hazard setpoints can be configured for two of the proportional values. The 3500/40 monitor is shipped factory unconfigured. When necessary, the 3500/40 monitor can be mounted in the 3500 rack and configured to accomplish the required monitoring functions. This allows users to purchase only one monitor and use it for a variety of different purposes. The module can receive input from a variety of replacement sensors, including the following Bently Nevada sensors:The 3300X is 8 mm long3300 RAM3300 5 mm and 8 mm3300 16 mm HTPS7200 5, 8, 11 and 14 mm3000Common models:3500/40-01-00，3500/40-03-00，3500/40-01-01，3500/40-03-01The spare parts are as follows:140734-01 3500/40M Proximitor® Displacement Monitor125680-01 Proximitor I/O Module with internal terminals126615-01 Proximitor I/O Module with External Terminals135489-04 Proximitor I/O Module with Internal Barrier and Internal Terminals149716-01 TMR Proximitor I/O Module with External Terminals143488-01 3500/40M Monitor Manual00580434 connector, internal terminal, 8-pos., green00502133 connector, internal terminal, 12-pos., blue

The main functions of Bently 3500/42M displacement/velocity and acceleration monitor are: to provide 1) continuous comparison of the current mechanical vibration and configuration alarm set points to drive the alarm to protect the machinery, 2) to provide basic mechanical vibration information to the operation personnel and maintenance personnel. The alarm set points are configured by means of the 3500 frame configuration software. Alarm setpoints can be configured for each valid proportional value, while only two of all valid proportional values can be configured for dangerous setpoints. When issued from the manufacturing plant, the 3500/42 is not configured. When required, the 3500/42M can be installed in the 3500 frame and configured to perform the required monitoring functions. This allows you to store a single monitor for use in a variety of different applications. The 3500/42 monitor is a quad-channel monitor that receives an input from an eddy-current displacement sensor and a proximitor and seismic transducer and drives an alarm based on this input. The 3500/42 can be programmed with the 3500 frame configuration software to perform the following measurement functions: radial vibration, axial position, eccentricity, differential expansion, acceleration, velocity. The module can receive input from a variety of sensors, including the following Bently Nevada sensors:Bently 3500/42-AXX-BXXI/O module type01 Displacement/Velocity Acceleration I/O Module with Internal Terminals02 Displacement/velocity acceleration I/O module with external terminals03 Triple redundant (TMR) I/O module with external terminals04 I/O module with internal barrier (4 × displacement/acceleration channels) and internal terminals05 I/O module with internal barrier (2× displacement/acceleration + 2× speedometer channels) and internal terminals06 I/O module with internal barrier (4 × speedometer channels) and internal terminals07 Shaft absolute vibration I/O module with internal terminals08 Shaft absolute vibration I/O module with external terminals09 Displacement/velocity meter I/O module with internal terminals10 Displacement/velocity meter I/O module with external terminals