Basic parametersCompatible motor power: Compatible with 55kW motors, it can provide stable and efficient drive for motors in this power class.Rated output current: The rated output current is about 105A, which determines the amount of continuous power that the inverter can provide to the motor to ensure the stable operation of the motor under rated working conditions.Power supply specifications: support three-phase AC 380 - 500V power input, can adapt to the grid voltage standards in different regions, and enhance the versatility and applicability of the product. The power supply frequency range is 50/60Hz, which is compatible with different power supply frequency environments.Overload capacity: Similar to the same series of frequency converters, it can withstand 150% of the rated current for a short time (e.g. 60 seconds) and 125% of the rated current during continuous operation, which can cope with motor start-up or short load fluctuations.Output Frequency Range: In V/F control mode, the output frequency range is typically 0 - 600Hz; In VFC (Vector Control) mode, the output frequency range is generally 0 - 150Hz, which can meet the diverse needs of different equipment for motor speed.

SEW MC07B0075 - 5A3 - 4 - 00 is a MOVITRAC B-series inverter, the following are its detailed specifications and description:Basic parametersApplicable motor power: 7.5kW.Rated output current: 16A, 20A at 125% rated current.Power specification: three-phase 380 - 500V, frequency 50 - 60Hz±5%.Overload capability: 125% typically in continuous operation and up to 150% for short periods of time (e.g., at least 60 seconds).Output frequency range: 0 - 150Hz in VFC mode and 0 - 600Hz in V/F mode.Product Description:Control function: Adopt SVC current vector control without speed sensor, the control accuracy is 5%, and the steady speed control accuracy is ±7.5rpm. Wide speed range, high low-frequency load capacity, 150% load at 0.5Hz in SVC mode and 150% load at 1.0Hz in VVF mode. It has two modes: linear acceleration and deceleration and S-curve acceleration and deceleration, which can independently enter the optimal adjustment state of overvoltage stall and overrun, and effectively control the output current and voltage.I/O configuration: 1 analog input, 6 digital inputs, 3 digital outputs (including 1 relay output). Integrated TF (PTC Temperature Sensor) voltage supply and evaluation for monitoring motor temperature, as well as TH evaluation.Protection function: It has protection functions such as overcurrent, ground fault, overload, inverter overheating, motor overheating (TF/TH), etc., and is equipped with 5 error memories to record the operating data at the time of error.Mechanical characteristics: The dimensions are 105×335×238mm, the weight is about 5kg, it is a modular structure, compact design, which can save space in the control cabinet.Other features: Integrated EMC line filters for different limit classes according to EN 61800 - 3. It has a STO (Safe Torque Off) safety function and has passed the relevant safety certifications. It supports a variety of communication protocols, and can be connected to the host computer or other devices through the optional communication module.

Basic parametersApplicable motor power: 0.37kW.Rated output current: AC1.6A.Power supply: Support three-phase power supply with a rated voltage of 380V.Frequency range: 0-600Hz.Product Description:Series: Part of the MOVITRAC B-series drives, compact and versatile with their sleek modular design.Applications: Simple basic operation, quick to use, efficient for a wide range of tasks such as fan applications, material handling, and basic positioning. Ideal for DR.. Series motors to control asynchronous and explosion-proof EDR. The speed of the motor.Other features:Operating temperature: 0-55°C is generally required, in order to ensure safety and reliability, it is recommended to control below 40°C.Environmental requirements: When the ambient temperature changes greatly, condensation should be prevented, and the control box should be made closed and ventilated in the environment with a large concentration of corrosive gas, and attention should be paid to avoid mechanical vibration and impact of the control cabinet.

Basic parametersApplicable motor power: 0.55kW.Rated output current: AC3.3A.Rated voltage: three-phase AC380-500V.Power frequency: 50Hz-60Hz±5%.Product Description:Series: Part of the MOVITRAC B-series drives, compact and versatile with their sleek modular design.Applications: Simple basic operation, quick to use, efficient for a wide range of tasks such as fan applications, material handling, and basic positioning. Ideal for DR.. Series motors to control asynchronous and explosion-proof EDR. The speed of the motor.Other features:Control mode: support VVVF speed regulation (variable voltage and frequency conversion speed regulation, U/F = constant) and vector control, and can also be controlled by switching, analog or communication.Function: It can realize the functions of soft start, frequency conversion speed regulation, improvement of operation accuracy, change of power factor, over-current/over-voltage/overload protection of AC asynchronous motor.

Basic parametersApplicable motor power: 0.55kW.Rated output current: AC3.3A.Rated voltage: three-phase AC380-500V.Power frequency: 50Hz-60Hz±5%.Product Description:Series: Part of the MOVITRAC B-series drives, compact and versatile with their sleek modular design.Applications: Simple basic operation, quick to use, efficient for a wide range of tasks such as fan applications, material handling, and basic positioning. Ideal for DR.. Series motors to control asynchronous and explosion-proof EDR. The speed of the motor.Other features:Control mode: support VVVF speed regulation (variable voltage and frequency conversion speed regulation, U/F = constant) and vector control, and can also be controlled by switching, analog or communication.Function: It can realize the functions of soft start, frequency conversion speed regulation, improvement of operation accuracy, change of power factor, over-current/over-voltage/overload protection of AC asynchronous motor.

Basic parametersApplicable motor power: 1.1kW.Rated output current: AC3.1A.Power supply: three-phase AC380-500V, 50/60Hz.Overload capability: 125% in continuous operation, up to 150% in at least 60 seconds.Operating temperature: Rated operating temperature up to ambient temperature θ=50°C, derated operation at ambient temperature θ=60°C.Speed range: 0-5500rpm.Output frequency range: 0-150Hz in VFC mode, 0-600Hz in V/F mode.Product Description:Features: 4-quadrant operation capability with integrated brake chopper. The control mode is V/F control or VFC control mode, and the automatic braking rectifier is controlled by the frequency converter. It has a variety of functions, such as a stationary current function for fast starting, a heating current function to prevent condensation of the motor at low temperatures, a flying car start function to synchronize the inverter with the running motor, a lifting capacity, a DC braking function for decelerating the motor in 1-quadrant mode, a slip compensation for high static speed accuracy, and a sliding current limit for motor stall protection in the field of weak magnetism. It also has 2 complete sets of motor parameter sets, factory reset and parameter lock to prevent parameter changes.I/O configurations: 1 analog input, 6 digital inputs, 3 digital outputs (including 1 relay output), optional 1 additional analog input / 1 additional analog output. The TF (PTC Temperature Sensor) voltage supply and evaluation for monitoring the motor temperature and the TH evaluation for the motor temperature monitoring are integrated.Mechanical characteristics: Dimensions are 18.5cm high, 8cm wide, 16.3cm long, weight 1.5kg. The modular design and compact unit design minimizes the space requirements of the control cabinet and optimizes the volume utilization of the control cabinet.Protection: Protection functions such as overcurrent, ground fault, overload, inverter overheating, motor overheating (TF/TH), speed monitoring and monitoring of motor and regenerative limit power, and 5 error memories to record all relevant operating data at the time of error.Additional features: Integrated EMC line filters to meet different limits according to EN 61800-3 in different sizes. Features configurable input/output, discrete signal terminals. The size 0 product features separate power and signal terminals to insulate EMC capacitors to reduce leakage current and is suitable for IT systems, as well as a "cold plate" mount that allows for longer motor cable lengths.Overall, the SEW MC07B0011-5A3-4-00 frequency inverter is suitable for a wide range of industrial applications and provides efficient and reliable drive and control of synchronous and asynchronous motors.

Basic parametersApplicable motor power: 1.5kW.Rated output current: approx. AC4.0A.Power supply: three-phase AC380 - 500V, 50/60Hz.Overload capability: 125% typically in continuous operation and up to 150% for short periods of time (e.g., at least 60 seconds).Operating temperature: Rated operation at ambient temperature 50°C, derated operation at 60°C.Output frequency range: 0 - 150Hz in VFC mode and 0 - 600Hz in V/F mode.Product Description:Features: 4-quadrant operation, integrated brake chopper (non-S1 duty) optional. The control mode is V/F control or VFC control mode, and the automatic braking rectifier is controlled by the frequency converter. It is equipped with a variety of functions, such as a static current function for fast start, and a heating current function to prevent condensation of the motor at low temperatures. It also has 2 complete sets of motor parameter sets, factory reset and parameter lock to prevent parameter changes.I/O configurations: 1 analog input, 6 digital inputs, 3 digital outputs (including 1 relay output), optional 1 additional analog input / 1 additional analog output. The TF (PTC Temperature Sensor) voltage supply and evaluation for monitoring the motor temperature and the TH evaluation for the motor temperature monitoring are integrated.Mechanical characteristics: compact size, the specific size can refer to the general specification manual of this series of inverters, generally about 18.5cm high, 8cm wide, 16.3cm long, and about 1.5kg in weight. The modular design minimizes the space requirements of the control cabinet and optimizes the volume utilization of the control cabinet.Protection: Protection functions such as overcurrent, ground fault, overload, inverter overheating, motor overheating (TF/TH), speed monitoring and monitoring of motor and regenerative limit power, and 5 error memories to record all relevant operating data at the time of error.Other features: Can be connected to single-phase line power, coated modules and nickel-plated copper busbars. Wide operating temperature range for harsh industrial applications. Thanks to the expandable functionality of the SINAMICS components, EMC line filters can be integrated to meet different limits according to EN 61800 - 3 in different sizes. Features configurable input/output, discrete signal terminals. The size 0 product features separate power and signal terminals to insulate EMC capacitors to reduce leakage current and is suitable for IT systems, as well as a "cold plate" mount that allows for longer motor cable lengths.

Basic parametersApplicable motor power: 1.5kW.Rated output current: Approx. 4.0A.Power Specifications: Support three-phase AC 400 - 500V power input, power frequency is 50/60Hz.Overload capacity: Similar to the same series of frequency converters, it can withstand 150% of the rated current for a short time (e.g. 60 seconds) and 125% of the rated current during continuous operation, which can cope with motor start-up or short load fluctuations.Output Frequency Range: In V/F control mode, the output frequency range is typically 0 - 600Hz; In VFC (Vector Control) mode, the output frequency range is generally 0 - 150Hz, which can meet the diverse needs of different equipment for motor speed.Product Description:Control function: Support V/F control and VFC vector control, you can choose the appropriate control mode according to different application scenarios. It is equipped with a wide range of operating functions such as fast start, stationary current, heating current to prevent condensation of the motor at low temperatures, and speeding start.Input/output configuration: There is usually 1 analog input port for receiving external analog signals to continuously adjust the output frequency, speed and other parameters of the inverter. It has 6 digital input ports, which can receive external switching signals such as start, stop, forward and reverse control; 3 digital output ports, one of which is a relay output, for the output of the inverter's operating status signal. The TF (PTC Temperature Sensor) voltage supply and evaluation function for monitoring the motor temperature and the TH evaluation function for motor temperature monitoring are integrated.Protection function: It has a variety of protection functions such as overcurrent protection, grounding fault protection, overload protection, inverter overheating protection, motor overheating protection, etc., and also has a plurality of error memory, which can record the relevant operation data at the time of the error, which is convenient for maintenance personnel to troubleshoot.Mechanical characteristics and design: modular, compact design, compact structure, small size, save control cabinet installation space, and at the same time easy to install, debug and maintain. It can be used in harsh industrial applications with an ambient temperature rating of up to 50 degrees. The integrated EMC line filter reduces electromagnetic interference and meets the different limits specified in EN 61800 - 3.Communication and expansion: Communication connection with host computer or other equipment can be realized through optional communication modules (such as FSC11B, FSC12B, FSE24B, etc.), and a variety of communication protocols (such as Modbus, CANopen, etc.) are supported. Input/output expansion is allowed, and additional input and output ports can be added according to actual needs to meet more complex control requirements.

Basic parametersCompatible motor power: 2.2kW.Rated output current: AC5.5A.Power supply: three-phase AC380-400V, 50/60Hz.Overload capability: 125% typically in continuous operation and up to 150% for short periods of time (e.g., at least 60 seconds).Operating temperature: Rated operation at ambient temperature 50°C, derated operation at 60°C.Output frequency range: 0-150Hz in VFC mode, 0-600Hz in V/F mode.Product Description:Features: 4-quadrant operation, integrated brake chopper (non-S1 duty) optional. The control mode is V/F control or VFC control mode, and the automatic braking rectifier is controlled by the frequency converter. It is equipped with a variety of functions, such as a static current function for fast start, and a heating current function to prevent condensation of the motor at low temperatures. It also has 2 complete sets of motor parameter sets, factory reset and parameter lock to prevent parameter changes.I/O configurations: 1 analog input, 6 digital inputs, 3 digital outputs (including 1 relay output), optional 1 additional analog input / 1 additional analog output. The TF (PTC Temperature Sensor) voltage supply and evaluation for monitoring the motor temperature and the TH evaluation for the motor temperature monitoring are integrated.Mechanical characteristics: Compact size, 0L size. The modular design minimizes the space requirements of the control cabinet and optimizes the volume utilization of the control cabinet.Protection: Protection functions such as overcurrent, ground fault, overload, inverter overheating, motor overheating (TF/TH), speed monitoring and monitoring of motor and regenerative limit power, and 5 error memories to record all relevant operating data at the time of error.Other features: Can be connected to single-phase line power, coated modules and nickel-plated copper busbars. Wide operating temperature range for harsh industrial applications. Thanks to the expandable functionality of the SINAMICS components, EMC line filters can be integrated to meet different limits according to EN 61800 - 3 in different sizes. Features configurable input/output, discrete signal terminals. The size 0 product features separate power and signal terminals to insulate EMC capacitors to reduce leakage current and is suitable for IT systems, as well as a "cold plate" mount that allows for longer motor cable lengths.

Basic parametersCompatible motor power: This model is usually suitable for 4.0kW motor power, which can provide stable and efficient drive control for the corresponding power motor.Rated output current: The rated output current is about 9.0A, which can meet the power demand of the adaptation motor during normal operation and ensure the stable operation of the motor.Power Specifications:Voltage: three-phase AC 380 - 500V, which can adapt to the grid voltage standards in different regions and has a wide range of applicability.Frequency: 50/60Hz, compatible with different power supply frequency environments.Overload capacity: It has a certain overload capacity, generally in a short period of time (such as 60 seconds) can withstand 150% of the rated current, and can withstand 125% of the rated current in continuous operation, which makes the inverter can still operate reliably when the motor is started or encounters short-term load fluctuations, reducing downtime caused by overload.Output Frequency Range: Wide output frequency range from 0 - 600Hz in V/F control mode and 0 - 150Hz in VFC (vector control) mode. The wide frequency range can meet the diverse needs of motor speed in different application scenarios.Product Description:Control functionsVarious control modes: V/F control and VFC (vector control) are supported. The V/F control mode is simple, which is suitable for general occasions with low requirements for speed regulation accuracy; VFC vector control can achieve more accurate motor torque and speed control, which can meet the application scenarios with high requirements for motor performance, such as machine tools, conveyor lines and other equipment.Abundant running functions: with fast start, static current function, can make the motor reach the required speed in a short time; It is also equipped with a heating current function to prevent condensation of the motor at low temperatures, which can protect the motor in cold environments. In addition, the speed start function allows the inverter to be quickly synchronized with the running motor, improving the operating efficiency of the equipment.Input/output configurationAnalog input: Equipped with 1 analog input port, it can be used to receive external analog signals (such as 0 - 10V voltage signal or 4 - 20mA current signal) to realize continuous adjustment of the output frequency, speed and other parameters of the inverter.Digital inputs and outputs: 6 digital inputs and 3 digital outputs (including 1 relay output). The digital input can be used to receive external switching signals, such as start, stop, forward and reverse control, etc.; The digital output can be used to output the operating status signals of the inverter, such as operation, fault, alarm, etc., which is convenient for linkage control with other equipment.Motor temperature monitoring: The TF (PTC Temperature Sensor) voltage supply and evaluation function for monitoring the motor temperature and the TH evaluation function for motor temperature monitoring are integrated. When the temperature of the motor is too high, the inverter can take protective measures in time, such as reducing the output frequency, stopping the machine, etc., to avoid damage to the motor due to overheating.

Basic parametersApplicable motor power: 4.0kW.Rated output current: Approx. 8.5A.Power specification: three-phase AC 400 - 500V, power frequency 50/60Hz.Overload capability: typically 150% of the rated current for short periods of time (e.g., 60 seconds) and 125% of the rated current for continuous operation.Output Frequency Range: 0 - 600Hz in V/F control mode; 0 - 150Hz in VFC (Vector Control) mode.Product Description:Control function: Support V/F control and VFC vector control. It has the function of automatic identification of motor parameters, relying on the mathematical model of the motor, it can automatically identify the stator impedance, mutual inductance, magnetic saturation factor, inertia and other parameters of the motor, and calculate the actual torque, stator flux and rotor speed for real-time control. Band-to-Band control can also be realized, and PWM signals are generated by Band-Band control of flux and torque to control the inverter switching state.Input/output configuration: There is 1 analog input port for receiving external analog signals to adjust parameters such as output frequency. 6 digital input ports, which can receive control signals such as start, stop, forward and reverse; 3 digital output ports, 1 of which is a relay output, for outputting operating status signals. Integrated TF (PTC Temperature Sensor) voltage supply and evaluation function and TH evaluation function for motor temperature monitoring.Protection function: It has a variety of protection functions such as overcurrent protection, ground fault protection, overload protection, inverter overheating protection, motor overheating protection, etc. It has multiple error memories to record the operating data at the time of error occurrence and facilitate troubleshooting.Mechanical characteristics and design: modular, compact design, compact structure, small size, saving control cabinet installation space, easy to install, debugging and maintenance. It can adapt to harsh industrial environments with an ambient temperature rating of up to 50 degrees. The integrated EMC line filter reduces electromagnetic interference and meets the different limits specified in EN 61800 - 3.Communication and expansion: Communication connection with host computer or other equipment can be realized through optional communication modules (such as FSC11B, FSC12B, FSE24B, etc.), and a variety of communication protocols (such as Modbus, CANopen, etc.) are supported. Input/output expansion is allowed, and additional input and output ports can be added according to actual needs to meet more complex control requirements.

Basic parametersApplicable motor power: 5.5kW.Rated output current: 11.3A, 14.1A at 125% rated current.Power specification: three-phase 380 - 500V, frequency 50 - 60Hz±5%.Overload capability: 125% typically in continuous operation and up to 150% for short periods of time (e.g., at least 60 seconds).Output frequency range: 0 - 150Hz in VFC mode and 0 - 600Hz in V/F mode.Product Description:Control function: Adopt SVC current vector control without speed sensor, the control accuracy is 5%, and the steady speed control accuracy is ±7.5rpm. Wide speed range, high low-frequency load capacity, 150% load at 0.5Hz in SVC mode and 150% load at 1.0Hz in VVF mode. It supports linear acceleration and deceleration and S-curve acceleration and deceleration modes, and can independently enter the optimal adjustment state of overvoltage stall and over-loss rate, and effectively control the output current and voltage.I/O configurations: 1 analog input, 6 digital inputs, 3 digital outputs (including 1 relay output). Integrated TF (PTC Temperature Sensor) voltage supply and evaluation for monitoring motor temperature, as well as TH evaluation.Protection functions: It has protection functions such as overcurrent, ground fault, overload, inverter overheating, motor overheating (TF/TH), etc., and has 5 error memories to record the operating data at the time of error.Mechanical characteristics: the dimensions are 105×335×238mm, the weight is about 5kg, the structure is modular, and the compact design saves space in the control cabinet.Other features: Integrated EMC line filters for different limit classes according to EN 61800 - 3. It has a STO (Safe Torque Off) safety function and has passed the relevant safety certifications. It supports a variety of communication protocols, and can be connected to the host computer or other devices through the optional communication module.

Basic parametersApplicable motor power: 22kW.Rated output current: 46A.Power specification: three-phase 380 - 400V, frequency 50 - 60Hz±5%.Overload capability: 125% typically in continuous operation and up to 150% for short periods of time (e.g., at least 60 seconds).Output frequency range: 0 - 150Hz in VFC mode and 0 - 600Hz in V/F mode.Product Description:Control function: Adopt SVC current vector control without speed sensor, the control accuracy is 5%, and the steady speed control accuracy is ±7.5rpm. Wide speed range, high low-frequency load capacity, 150% load at 0.5Hz in SVC mode and 150% load at 1.0Hz in VVF mode. It has two modes: linear acceleration and deceleration and S-curve acceleration and deceleration, which can independently enter the optimal adjustment state of overvoltage stall and overrun, and effectively control the output current and voltage.I/O configuration: 1 analog input, 6 digital inputs, 3 digital outputs (including 1 relay output). Integrated TF (PTC Temperature Sensor) voltage supply and evaluation for monitoring motor temperature, as well as TH evaluation.Protection function: It has protection functions such as overcurrent, ground fault, overload, inverter overheating, motor overheating (TF/TH), etc., and is equipped with 5 error memories to record the operating data at the time of error.Mechanical characteristics: The dimensions are 105×335×238mm, the weight is about 5kg, it is a modular structure, compact design, which can save space in the control cabinet.Other features: Integrated EMC line filters for different limit classes according to EN 61800 - 3. It has a STO (Safe Torque Off) safety function and has passed the relevant safety certifications. It supports a variety of communication protocols, and can be connected to the host computer or other devices through the optional communication module.

Basic parametersAdaptable motor power: Compatible with 30kW motor, it can provide stable and efficient drive for motors of this power level to meet the power needs of various machinery and equipment in industrial production.Rated output current: The rated output current is about 63A, which determines the amount of continuous power that the inverter can provide to the motor to ensure the stable operation of the motor under rated working conditions.Power SpecificationsVoltage: Support three-phase AC 380 - 480V power input, can adapt to the grid voltage standards in different regions, enhance the versatility and applicability of the product.Frequency: The power supply frequency range is 50/60Hz, which is compatible with different power supply frequency environments.Overload capacityIt has some overload capability and can withstand 150% of the rated current for a short time (e.g., 60 seconds) and 125% of the rated current during continuous operation. This overload capability allows the inverter to operate reliably even when the motor is started or encounters short load fluctuations, reducing downtime due to overload and ensuring production continuity.Output frequency rangeIn V/F control mode, the output frequency range is 0 - 600Hz; In VFC (Vector Control) mode, the output frequency range is 0 - 150Hz. The wide frequency range can meet the diverse needs of motor speed in different application scenarios, such as setting a higher output frequency in equipment that requires high-speed operation, and using vector control mode in some occasions that require high speed accuracy.

Basic parametersApplicable motor power: 75kW, which can provide stable drive for the motor of this power.Rated output current: about 145A, which determines the size of the inverter to provide continuous power to the motor.Power specification: three-phase AC 380 - 500V power input, power frequency 50/60Hz.Overload capacity: The inverter of the same series can usually withstand 150% of the rated current for a short time (60 seconds) and 125% of the rated current for continuous operation, which can cope with motor start-up or short load fluctuations.Output Frequency Range: 0 - 600Hz in V/F control mode; VFC (Vector Control) mode 0 - 150Hz to meet the needs of different equipment for motor speed.Product Description:Control function: Support V/F control and VFC vector control, which can be selected according to the application scenario. It has operation functions such as fast start, stationary current, heating current to prevent motor condensation at low temperatures, and speed start.Input/output configuration: There is usually 1 analog input port for receiving external analog signals to adjust the output frequency, speed and other parameters of the inverter. There are 6 digital input ports, which can receive external switching signals such as start, stop, forward and reverse control; 3 digital output ports, 1 of which is a relay output, for the output of the inverter operating status signal. Integrated TF (PTC Temperature Sensor) voltage supply and evaluation function for monitoring motor temperature, as well as TH evaluation function.Protection function: It has a variety of protection functions such as overcurrent protection, ground fault protection, overload protection, inverter overheating protection, motor overheating protection, etc., as well as multiple error memory, which can record the operation data at the time of the error, which is convenient for maintenance personnel to troubleshoot.Mechanical characteristics and design: modular, compact design, compact structure, small size, saving control cabinet installation space, easy to install, debugging and maintenance. The integrated EMC line filter reduces electromagnetic interference and meets the different limits specified in EN 61800 - 3.Communication and expansion: Communication connection with host computer or other equipment can be realized through optional communication modules (such as FSC11B, FSC12B, FSE24B, etc.), and a variety of communication protocols (such as Modbus, CANopen, etc.) are supported. Input/output expansion is allowed, and additional input and output ports can be added according to actual needs to meet more complex control requirements.

Basic parametersRated power: 7.5kW.Input parameters: The rated voltage is three-phase AC 380 - 500V, the power supply frequency is 50 - 60Hz, and the input current is about 16A.Output parameters: output capacity about 12.5kVA, output current 17.5A, output frequency range 0 - 599Hz.Overload capacity: 150% overload allowed for 60s, 175% overload allowed for 2s.Degree of protection: IP20.Dimensions: 150mm wide, 355mm high, 300mm deep.Weight: approx. 9kg.Control functionsControl mode: Support voltage vector control (VFC), current vector control (CFC), etc., to achieve high-precision control of the motor.Built-in functions: Integrated IPOS positioning and sequence control system for speed control, single-axis position control, and more. Drive tasks such as positioning and curling can be completed through standardized control programs, and the user can set parameters through a wizard without complex programming.

Basic parametersRated power: 90kW.Current rating: Approx. 160A.Main supply voltage: AC 380 - 500V.Number of phases: three phases.Output frequency range: 0 - 400Hz.Overload capacity: 150% overload operation for 60s, 175% overload operation for 2s.Degree of protection: IP20, suitable for indoor cleaning environment.Control functionsControl mode: Support voltage vector control (VFC), current vector control (CFC) and other control methods, which can realize high-precision control of the motor.Built-in functions: Integrated IPOS positioning and sequence control system, which can easily realize speed control, single-axis position control and other functions, and can also complete driving tasks such as positioning and curling through standardized control programs, and users can set parameters through wizards without complex programming.

Rated power: 0.55kW.Input parameters: rated voltage is 380 - 500V for three-phase AC and 50 - 60Hz for power supply.Output parameters: The power of the adapted motor is 0.55kW, the output capacity is about 1.2kVA, the output current is about 2.5A, and the output frequency range is usually 0 - 400Hz.Overload capacity: generally 150% overload operation for 60s, 175% overload operation for 2s.Degree of protection: IP20, suitable for indoor cleaning environment.Dimensions: Width may be 45mm (0.55 - 1.5kW inverter width in the MOVIDRIVE "B" series), height and depth are not yet available, but can be estimated with reference to the dimensions of similar products in the same series such as the MDX61B0110 135mm×315mm×285mm.Weight: Refer to the same series of low-power products, which may be around 2 - 3kg.

Motor power: It is the less powerful of the MDX61B series, and the motor power is 1.1kW.Rated voltage: three-phase AC380 - 500V.Overload capacity: 150% overload allowed for 60s; 125% sustained overload; 200% short-term overload for 1s (for power of 1.5kW and below).Applicable temperature: operating temperature is 0°C - 60°C, storage temperature is - 25°C - 70°C.Degree of protection: IP20 (up to 30kW); IP10 (from 37kW). The drive may be IP20.

Basic parametersApplicable motor power: 0.75kW.Input parameters: three-phase 380 - 500V AC, 50/60Hz, input current 2.1A.Output parameters: output capacity 1.3kVA, output current 1.8A, output frequency range 0 - 650Hz.Overload capacity: 150% overload allowed for 60s; 125% sustained overload; 200% short overload 1s (for motors up to 1.5kW).Degree of protection: IP20.Dimensions: 105mm wide, 314mm high, 234mm deep, and weighs about 3.5kg.Control functionsControl mode: The use of advanced vector control and other algorithms can realize high-precision control of synchronous or asynchronous motors, and can output large torque at low speed.Built-in functions: Integrated IPOS positioning and sequencing control system for specific control tasks and logic operations. The application version of the inverter has a "0T" logo at the end, provides an application module interface, and standardized control programs can be used for positioning, curling and control drive tasks, and the user can set the parameters through a wizard without complex programming.Communication capabilitiesIt supports a variety of communication protocols, such as RS-232/RS485, PROFIBUS, INTERBUS, CAN, DEVICE-NET, SBUS and Ethernet Modbus TCP, etc., which can communicate and interact with the host computer or other devices to achieve remote control and monitoring

Basic parametersRated power: 37kW.Input parameters: three-phase AC 380 - 500V, power supply frequency 50 - 60Hz, input current 65.7A.Output parameters: output capacity 51.1kVA, output current 73A, output frequency range 0 - 599Hz (can be adjusted according to settings).Overload capacity: 150% overload allowed for 60s, 175% overload allowed for 2s.Degree of protection: IP20.Dimensions: Width 28cm, height 52cm, depth 30.7cm.Weight: 27kg.Control functionsControl mode: Support voltage vector control (VFC), current vector control (CFC), etc., to achieve high-precision control of the motor.Built-in functions: Integrated IPOS positioning and sequence control system for speed control, single-axis position control, and more. Drive tasks such as positioning and curling can be completed through standardized control programs, and the user can use the wizard to set the parameters without complex programming.

Power supply voltage: typically three-phase AC 380 - 500V, suitable for a variety of industrial voltage needs.Connection type: Three-phase connection, suitable for three-phase motors.Braking function: Built-in brake chopper for fast braking.Communication interface: Provide a variety of communication interfaces, such as PROFIBUS DP/FMS, INTERBUS - S, CAN, etc., which is convenient to communicate with the host computer or other equipment.Control technology: Vector control technology is used to achieve high-precision control of motor speed and torque.Features:High-precision control: Through vector control technology, the motor speed and torque are accurately controlled to improve the stability and control accuracy of the system.Fast dynamic response: It can quickly respond to changes in control instructions and realize rapid adjustment and control of the motor.A variety of protection functions: with a variety of protection functions such as over-current, over-voltage, under-voltage, over-temperature, etc., to ensure the safe operation of the motor and equipment.User-friendliness: Provide highly user-friendly operation interface and parameter setting mode, which is convenient for user debugging and maintenance.

Basic parametersRated power: 0.75kW.Input parameters: rated voltage is 380 - 500V for three-phase AC and 50 - 60Hz for power supply.Output parameters: The power of the adapted motor is 0.75kW, the output capacity is about 1.5kVA, the output current is about 4.0A, and the output frequency range is usually 0 - 400Hz.Overload capacity: 150% overload operation for 60s, 175% overload operation for 2s.Degree of protection: IP20, suitable for indoor cleaning environment.Dimensions: 72.5mm wide, 317mm high, 260mm deep.Weight: Approx. 2.0kg.Control functionsControl mode: Support a variety of control methods, such as voltage vector control (VFC), current vector control (CFC), etc., to achieve high-precision control of the motor.Built-in functions: Integrated IPOS positioning and sequence control system, which can easily realize speed control, single-axis position control and other functions, and can also complete driving tasks such as positioning and curling through standardized control programs, and users can set parameters through wizards without complex programming.

Input power: 3-phase 380 - 480V, 50/60HzOutput Power: The output voltage range is 0 - input supply voltage, and the output frequency range is 0 - 650Hz.Power and current parametersAdaptation to motor power: Adaptation of three-phase AC asynchronous motors with a power of about 0.8kW provides stable and reliable drive for motors of this power class.Rated output current: The rated output current is about 2.2AOverload capacity: It has a certain overload capacity, which can last for 60 seconds at 120% rated current and 3 seconds at 150% rated current, which can cope with motor start-up and load mutation.Ambient temperature: The operating ambient temperature range is -10°C - 40°C (derating is required above 40°C), and the storage temperature range is -25°C - 70°C.Humidity: 5% - 95% relative humidity (non-condensing), which can adapt to a more humid working environment, but avoid condensation and damage to the equipment.Protection level: The standard protection level is IP20, which can prevent solid foreign objects with a diameter greater than 12.5mm from entering the inside of the device, which plays a certain role in protecting the equipment.

Rated power: 1.1kW.Input parameters: rated voltage is three-phase AC 380 - 500V, power supply frequency 50 - 60Hz, input current 2.8A.Output parameters: output capacity 2.1kVA, output current 3.1A, output frequency range is usually 0 - 400Hz.Overload capacity: 150% overload operation for 60s, 200% short-time overload for 1s (for power of 1.5kW and below).Degree of protection: IP20, suitable for indoor cleaning environment, can prevent the intrusion of solid objects larger than 12mm.Dimensions: Width 9.5cm, height 31.7cm, depth 26cm.Weight: 2.8kg.Control functionsControl mode: Support voltage vector control (VFC), current vector control (CFC) and other control methods, which can realize high-precision control of the motor.Built-in functions: Integrated IPOS positioning and sequence control system, which can easily realize speed control, single-axis position control and other functions, and can also complete driving tasks such as positioning and curling through standardized control programs, and users can set parameters through wizards without complex programming.

Rated power: 1.5kW.Input parameters: three-phase AC 380 - 500V, power frequency 50 - 60Hz, input current 3.6A.Output parameters: output capacity 2.8kVA, output current 4A, output frequency range is usually 0 - 600Hz.Overload capacity: It has a high overload capacity to meet the needs of different loads.Degree of protection: IP20, suitable for indoor cleaning environment.Dimensions: 95mm wide, 317mm high, 260mm deep.Weight: Approx. 2.8kg.

Basic parametersInput: 3-phase 380 - 500V, 50/60Hz, 3.6A.Output: 2.8kVA, 4A, 1.5kW motor.Voltage range: Operates reliably in the bus voltage range of 3-phase 380 - 480V (-15% / 10%).Ambient temperature: Ambient temperatures up to 60°C during operation.Control functionsControl mode: support VVVF speed regulation (variable voltage and frequency speed regulation, U/F = constant) and vector control, which can theoretically divide the stator current current of the asynchronous motor into the current component that generates the magnetic field (magnetic field current) and the current component that generates torque (torque current), so as to achieve high-precision motor control.Built-in functions: Integrated IPOS positioning and sequencing control system as standard for specific control tasks and logic operations. The application version of the inverter logo ends with "0T", which provides the interface to the application module, and the standardized control program in the application module is specially used for positioning, curling and control drive tasks, the user only needs to enter the parameters required by the application, and the parameters can be set through the wizard without complex programming.Energy-saving featuresECO Mode: Built-in energy-saving mode for V/f and V2/f control, which saves energy by automatically adjusting the magnetic flux current. The drives also support the display of energy consumption values in kWh, CO2 and even local units.DC co-linkage: SINAMICS V20 frequency inverters with the same power rating can share the same DC bus, enabling energy reuse and reducing the need for energy-intensive braking and external components.

Rated power: 2.2kW.Input parameters: rated voltage is three-phase AC 380 - 500V, power supply frequency 50 - 60Hz, input current about 5A.Output parameters: output capacity of about 3.7kVA, output current 5.5A, output frequency range 0 - 599Hz.Overload Capacity: Typically withstands 125% sustained overload.Degree of protection: IP20, suitable for indoor cleaning environment.Dimensions: 105mm wide, 314mm high, 234mm deep.Weight: 3.5kg.Control functionsControl mode: Support a variety of control methods, such as voltage vector control (VFC), current vector control (CFC), etc., to achieve high-precision control of the motor.Built-in functions: Integrated IPOS positioning and sequence control system for easy speed control, single-axis position control and other functions. Drive tasks such as positioning and curling can also be completed through standardized control programs, and the user can set the parameters through a wizard without complex programming.

Basic parametersApplicable motor power: 3kW.Input parameters: three-phase 400V AC, 50Hz, input current 8.5A.Output parameters: output current 6.8A, output capacity 4.5kVA, output voltage range of three-phase 0 - 400V, output frequency range of 0 - 650Hz.Overload capacity: 150% overload allowed for 60s; 125% sustained overload; 200% short overload 1s.Degree of protection: IP20.Dimensions: 265mm× 305mm×210mm, weight about 4.72kg.

Rated power: 2.2kW.Input parameters: rated voltage is three-phase AC 380 - 500V, power supply frequency 50 - 60Hz, input current about 5A.Output parameters: output capacity of about 3.7kVA, output current 5.5A, output frequency range 0 - 599Hz.Overload Capacity: Typically withstands 125% sustained overload.Degree of protection: IP20, suitable for indoor cleaning environment.Dimensions: 105mm wide, 314mm high, 234mm deep.Weight: 3.5kg.Control functionsControl mode: Support a variety of control methods, such as voltage vector control (VFC), current vector control (CFC), etc., to achieve high-precision control of the motor.Built-in functions: Integrated IPOS positioning and sequence control system for easy speed control, single-axis position control and other functions. Drive tasks such as positioning and curling can also be completed through standardized control programs, and the user can set the parameters through a wizard without complex programming.