ModelIV2-CP50Supported languagesEnglish / Japanese / German / Chinese (Simplified) /Chinese (Traditional) / Korean /Italian / French / Spanish / Portuguese / Czech / Hungarian / Polish / Thai*1Display5.7" TFT color LCD, 640 × 480 (VGA)BacklightMethodWhite LEDDurationApprox. 50000 hours (25°C 77°F)Touch panelMethodAnalog resistiveActuating force0.8 N or lessIndicatorsPWR, SENSOREthernetStandard100BASE-TX/10BASE-T*2ConnectorM12 4-pin connector*2Expanded memoryUSB memory*3RatingPower voltage24 VDC ±10% (including ripple)Current consumption0.3 A or lessEnvironmental resistanceEnclosure ratingIP40Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation) *4Drop resistance1.3 m 4.3' onto concrete (2 times in an arbitrary direction)Vibration resistance10 to 55 Hz; double amplitude 0.7 mm 0.03"; 2 hours in each of the X, Y, and Z directionsMaterialMain unit case: PC, Power connector: Brass + Ni plating, Ethernet connector: Zinc + Ni plating / PA,USB connector cover: EDPM, Pen holder: PC, Adapter fixing hook: POM,LED lamp cover: PC, Mounting adapter: PC, Stylus: POMWeightMain unit: Approx. 450 gWith wall mounting adapter and stylus attached: Approx. 485 g*1 When connected to the IV2 Series. When connected to the IV Series, the supported languages are the same as the IV-M30.*2 Dedicated for use in connecting to the IV2 Series and IV Series.*3 Use only products recommended by KEYENCE.*4 If the ambient operating temperature exceeds 40°C 104°F, use the product under conditions where the absolute humidity is 85% RH or less at 40°C 104°F.

ModelIV2-G150MATypeNarrow field of view sensor modelReference distance40 to 150 mm 1.57" to 5.91"Field of viewInstallation distance of 40 mm 1.57":8 (H) × 6 (V) mm 0.31" (H) × 0.24" (V) toInstallation distance of 150 mm 5.91":32 (H) × 24 (V) mm 1.26" (H) × 0.94" (V)*1Indicators2 (the same display details for both indicators)Image receiving elementType1/3 inch monochrome CMOSNumber of pixels752 (H) × 480 (V)Focus adjustmentAutomatic*2Exposure time1/20 to 1/50000LightsIlluminationWhite LEDLighting methodSwitchable between pulse lighting and DC lightingEnvironmental resistanceEnclosure ratingIP67*3Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions*4Shock resistance500 m/s2 1640.4'/s2, 6 times in each of the 3 directions*4MaterialMain unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPUWeightApprox. 75 g*1 When using the magnifying lens attachment (OP-87902): 4 (H) × 3 (V) mm 0.16" (H) × 0.12" (V) (at installation distance of 18 mm 0.71") to 7 (H) × 5.2 (V) mm 0.28" (H) × 0.20" (V) (at installation distance of 27 mm 1.06")*2 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*3 Except when the polarized light filter attachment (OP-87899/OP-87900/OP-87901) or the magnifying lens attachment (OP-87902) is mounted.*4 Except when the IV2 dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV2-G30TypeStandard typeToolsAvailable modesStandard modeStandard mode built-in toolsOutline, Color area*1, Area*2, Edge pixels, Color average*1, Brightness average*2, Width, Diameter, Edge presence, Pitch, OCR, Color/brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge)Number of toolsDetection tools: 16 tools, position adjustment tool: 1 tool*3Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)IndicatorsPWR/ERR, OUT, TRIG, STATUS, LINK/ACT, SDImage historyNumber of storable images1000 images *4Save conditionsSelectable between NG only, NG and OK near threshold*5, and All *4Image data transferTransfer destinationSelectable between SD card and FTP serverTransfer formatSelectable between bmp, jpeg, iv2p, and txtTransfer conditionsSelectable between NG only, NG and OK near threshold*5, and AllAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *6RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistograms: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.), Image capture interval (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errorsOutput monitor: ON/OFF status by outputOther functionsImage capture functionImage buffer, Image capture range, Digital zoom (2×, 4×), HDR, High gain, Color filter*1, White balance*1, Brightness correctionTool functionsMask outline, Masking function, Color extraction/exclusion*1, Color histogram function*1, Monochrome histogram function*2, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings, Simulator*7InputTypeSwitchable between non-voltage input and voltage inputFor non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)Number of inputs8 (IN1 to IN8)FunctionIN1: External trigger, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypeOpen collector output; NPN/PNP switchable, N.O./N.C. switchableFor open collector NPN output: Maximum rating of 26.4 V, 50 mA, residual voltage of 1.5 V or lessFor open collector PNP output: Maximum rating of 26.4 V, 50 mA, residual voltage of 2 V or lessNumber of outputs8 (OUT1 to OUT8)FunctionEnable by assigning optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Ready, Strobe, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card errorEthernetStandard100BASE-TX/10BASE-TConnectorRJ45 8-pin connectorNetwork functionFTP client, SNTP clientInterface compatibilityBuilt-in EthernetEtherNet/IPⓇ, PROFINET, TCP/IP non-procedure communicationCommunication unitEtherCATⓇ, CC-Link, DeviceNetⓇ, PROFIBUS, RS-232C*8Expanded memorySD card (SD/SDHC) *9RatingPower voltage24 VDC ±10% (including ripple)Current consumption1.8 A or less (including communication unit and output load)Environmental resistanceAmbient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation)MaterialMain unit case: PC, Power connector: PA/POM, I/O connector: PA, Sensor head connector: Zinc + Ni plating/PA,Ethernet connector: Copper alloy + Ni plating, Main unit rear heat sink: Aluminum, Main unit rear DIN rail fixing tab: POM, Nameplate: PCWeightApprox. 330 g*1 Color type only.*2 Monochrome type only.*3 Tools can be installed by programs.*4 Saves to the sensor amplifier’s internal memory. The images saved to the sensor amplifier can be backed up to a USB memory stick inserted into the control panel (IV2-CP50) or to the PC where the software for the IV2 Series (IV2-H1) is being used.*5 Learning mode only.*6 Can also be displayed on the control panel (IV2-CP50) or the software for the IV2 Series (IV2-H1).*7 Usable on the software for the IV2 Series (IV2-H1).*8 When a communication unit (DL Series) is connected.*9 Use only products recommended by KEYENCE.

ModelIV2-G300CATypeWide field of view sensor modelReference distance40 to 300 mm 1.57" to 11.81"Field of viewInstallation distance of 40 mm 1.57":42 (H) × 31 (V) mm 1.65" (H) × 1.22" (V) toInstallation distance of 300 mm 11.81":275 (H) × 206 (V) mm 10.83" (H) × 8.11" (V)Indicators2 (the same display details for both indicators)Image receiving elementType1/3 inch color CMOSNumber of pixels752 (H) × 480 (V)Focus adjustmentAutomatic*1Exposure time1/25 to 1/50000LightsIlluminationWhite LEDLighting methodPulse lightingEnvironmental resistanceEnclosure ratingIP67*2Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions*3Shock resistance500 m/s2 1640.4'/s2, 6 times in each of the 3 directions*3MaterialMain unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPUWeightApprox. 75 g*1 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*2 Except when the polarized light filter attachment (OP-87899/OP-87900/OP-87901) or the magnifying lens attachment (OP-87902) is mounted.*3 Except when the IV2 dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV2-G30FTypeLearning/standard typeToolsAvailable modesLearning mode / Standard modeStandard mode built-in toolsOutline, Color area*1, Area*2, Edge pixels, Color average*1, Brightness average*2, Width, Diameter, Edge presence, Pitch, OCR, Color/brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge)Number of toolsDetection tools: 16 tools, position adjustment tool: 1 tool*3Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)IndicatorsPWR/ERR, OUT, TRIG, STATUS, LINK/ACT, SDImage historyNumber of storable images1000 images *4Save conditionsSelectable between NG only, NG and OK near threshold*5, and All *4Image data transferTransfer destinationSelectable between SD card and FTP serverTransfer formatSelectable between bmp, jpeg, iv2p, and txtTransfer conditionsSelectable between NG only, NG and OK near threshold*5, and AllAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *6RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistograms: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.), Image capture interval (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errorsOutput monitor: ON/OFF status by outputOther functionsImage capture functionImage buffer, Image capture range, Digital zoom (2×, 4×), HDR, High gain, Color filter*1, White balance*1, Brightness correctionTool functionsLearning mode: Additional learningStandard mode: Mask outline, Masking function, Color extraction/exclusion*1, Color histogram function*1, Monochrome histogram function*2, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings, Simulator*7InputTypeSwitchable between non-voltage input and voltage inputFor non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)Number of inputs8 (IN1 to IN8)FunctionIN1: External trigger, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypeOpen collector output; NPN/PNP switchable, N.O./N.C. switchableFor open collector NPN output: Maximum rating of 26.4 V, 50 mA, residual voltage of 1.5 V or lessFor open collector PNP output: Maximum rating of 26.4 V, 50 mA, residual voltage of 2 V or lessNumber of outputs8 (OUT1 to OUT8)FunctionEnable by assigning optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Ready, Strobe, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card errorEthernetStandard100BASE-TX/10BASE-TConnectorRJ45 8-pin connectorNetwork functionFTP client, SNTP clientInterface compatibilityBuilt-in EthernetEtherNet/IPⓇ, PROFINET, TCP/IP non-procedure communicationCommunication unitEtherCATⓇ, CC-Link, DeviceNetⓇ, PROFIBUS, RS-232C*8Expanded memorySD card (SD/SDHC) *9RatingPower voltage24 VDC ±10% (including ripple)Current consumption1.8 A or less (including communication unit and output load)Environmental resistanceAmbient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation)MaterialMain unit case: PC, Power connector: PA/POM, I/O connector: PA, Sensor head connector: Zinc + Ni plating/PA,Ethernet connector: Copper alloy + Ni plating, Main unit rear heat sink: Aluminum, Main unit rear DIN rail fixing tab: POM, Nameplate: PCWeightApprox. 330 g*1 Color type only.*2 Monochrome type only.*3 Tools can be installed by programs.*4 Saves to the sensor amplifier’s internal memory. The images saved to the sensor amplifier can be backed up to a USB memory stick inserted into the control panel (IV2-CP50) or to the PC where the software for the IV2 Series (IV2-H1) is being used.*5 Learning mode only.*6 Can also be displayed on the control panel (IV2-CP50) or the software for the IV2 Series (IV2-H1).*7 Usable on the software for the IV2 Series (IV2-H1).*8 When a communication unit (DL Series) is connected.*9 Use only products recommended by KEYENCE.

ModelIV2-G500CATypeStandard modelReference distance20 to 500 mm 0.79" to 19.69"Field of viewInstallation distance of 20 mm 0.79":10 (H) × 7.5 (V) mm 0.39" (H) × 0.30" (V) toInstallation distance of 500 mm 19.69":200 (H) × 150 (V) mm 7.87" (H) × 5.91" (V)Indicators2 (the same display details for both indicators)Image receiving elementType1/3 inch color CMOSNumber of pixels752 (H) × 480 (V)Focus adjustmentAutomatic*1Exposure time1/10 to 1/50000LightsIlluminationWhite LEDLighting methodSwitchable between pulse lighting and DC lightingEnvironmental resistanceEnclosure ratingIP67*2Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions*3Shock resistance500 m/s2 1640.4'/s2, 6 times in each of the 3 directions*3MaterialMain unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPUWeightApprox. 75 g*1 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*2 Except when the polarized light filter attachment (OP-87899/OP-87900/OP-87901) or the magnifying lens attachment (OP-87902) is mounted.*3 Except when the IV2 dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV2-G500MATypeStandard modelReference distance20 to 500 mm 0.79" to 19.69"Field of viewInstallation distance of 20 mm 0.79":10 (H) × 7.5 (V) mm 0.39" (H) × 0.30" (V) toInstallation distance of 500 mm 19.69":200 (H) × 150 (V) mm 7.87" (H) × 5.91" (V)Indicators2 (the same display details for both indicators)Image receiving elementType1/3 inch monochrome CMOSNumber of pixels752 (H) × 480 (V)Focus adjustmentAutomatic*1Exposure time1/10 to 1/50000LightsIlluminationWhite LEDLighting methodSwitchable between pulse lighting and DC lightingEnvironmental resistanceEnclosure ratingIP67*2Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions*3Shock resistance500 m/s2 1640.4'/s2, 6 times in each of the 3 directions*3MaterialMain unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPUWeightApprox. 75 g*1 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*2 Except when the polarized light filter attachment (OP-87899/OP-87900/OP-87901) or the magnifying lens attachment (OP-87902) is mounted.*3 Except when the IV2 dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV2-G600MATypeWide field of view sensor modelReference distance40 to 600 mm 1.57" to 23.62"Field of viewInstallation distance of 40 mm 1.57":42 (H) × 31 (V) mm 1.65" (H) × 1.22" (V) toInstallation distance of 600 mm 23.62":550 (H) × 412 (V) mm 21.65" (H) × 16.22" (V)Indicators2 (the same display details for both indicators)Image receiving elementType1/3 inch monochrome CMOSNumber of pixels752 (H) × 480 (V)Focus adjustmentAutomatic*1Exposure time1/50 to 1/50000LightsIlluminationInfrared LEDLighting methodPulse lightingEnvironmental resistanceEnclosure ratingIP67*2Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions*3Shock resistance500 m/s2 1640.4'/s2, 6 times in each of the 3 directions*3MaterialMain unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPUWeightApprox. 75 g*1 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*2 Except when the polarized light filter attachment (OP-87899/OP-87900/OP-87901) or the magnifying lens attachment (OP-87902) is mounted.*3 Except when the IV2 dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV2-GD05Installed distance0 to 30 mm*1MaterialOuter: PBT Inner: PCWeightApprox. 100 g*1 Distance from the front of the IV2-GD05 to the target.

ModelIV2-GD10Installed distance0 to 50mm*1MaterialOuter: PBT Inner: PCWeightApprox. 200 g*1 Distance from the front of the IV2-GD10 to the target.

ModelIV2-H1Included softwareIV2 Series: IV2-Navigator, IV Series: IV-NavigatorSystem requirementsInterfaceEquipped with an Ethernet (100BASE-TX) interfaceOSWindows 10 Home/Pro/EnterpriseWindows 7 (SP1 or higher) Home Premium/Professional/UltimateEither of the OS above needs to be pre-installed*1LanguagesEnglish / Japanese / German / Chinese (Simplified) /Chinese (Traditional) / Korean /Italian / French / Spanish / Portuguese / Czech / Hungarian / Polish / Thai*2ProcessorCompliant with OS system requirementsMemory capacity4 GB or moreRequired capacity for installation4 GB or more MonitorResolution: 1024 × 768 pixels or higher, Display color: High Color (16 bit) or higherOperating conditions.NET Framework 4.5.2 or later installed*2*3Microsoft Visual C++ 2015 Redistribution Package Update 3 or later installed*3*1 32-bit and 64-bit versions supported.*2 When connected to the IV2 Series. When connected to the IV Series, the supported languages are the same as the IV-M30.*3 .NET Framework 4.5.2 will be automatically installed during IV2-H1 installation if .NET Framework 4.5.2 or later version is not installed.※IV-Navigator starts when the IV Series is connected.

ModelIV3-500CATypeStandardInstalled distance50 mm 1.97" or more *1ToolsAvailable modesStandard mode / Sorting modeTool with standard modeLearning, Outline, Color area *2, Area *3, Edge pixels, Color average *2, Brightness average *3, Width, Diameter, Edge presence, Pitch,OCR, Color prohibit *4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob countNumber of toolsTotal: 65 tools *5Field of viewInstalled distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V) toInstalled distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V)Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)Image receiving elementType1/2.9 inch color CMOSNumber of pixels1280 (H) × 960 (V)Image historyNumber of storable images100 images *6Save conditionsSelectable between NG only, NG and OK near threshold *7, and All *6Focus adjustmentAuto *4Image data transferTransfer destinationSelectable between SD card, FTP server and SFTP serverTransfer formatSelectable between bmp, jpeg, iv3p, and txt, and file names can be modifiedTransfer conditionsSelectable between NG only, NG and OK near threshold *8, and AllExposure time12 μs to 10 msAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *8RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errorsOutput monitor: ON/OFF status by output *8LightsIlluminationWhite LEDLighting methodPulse lighting/ continuously lighting is switchable.Other functionsImage capture functionDigital zoom (2×, 4×), HDR, High gain, Color filter *2, White balance *2, Brightness correction, AI captureTool functionsAdditional learning, Mask outline, Masking function, Color extraction/exclusion *2, Color histogram function *2, Monochrome histogram function *3, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator *9, Additional FTP/SFTP Image Information,Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUNIndicatorsOUT, TRIG, STATUS, LINK/ACT, SDInputTypeSwitchable between non-voltage input and voltage inputFor no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)Number of inputs6 ports, 3 ports are selectable as IN/OUTFunctionIN1: External trigger,IN2, IN3, I/O1 to I/O3: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypePhoto MOS relay output, N.O./N.C. SwitchableMaximum rating 30 V 50 mA, residual voltage 1.5 V or less *10Number of outputs6 ports, 3 ports are selectable as IN/OUTFunctionEnable by assigning the optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool,Error, SD card error, Variety discrimination result, Master judgment resultPower/I/OConnectorM12 12 pin A code Male connectorPoEPoE power Class 3/4/6  *11EthernetStandard1000BASE-T/100BASE-TXConnectorM12 8 pin X code Female connectorNetwork functionFTP client, SFTP clientInterface compatibilityBuilt-in EthernetEtherNet/IP®, PROFINET *12, TCP/IP non-procedure communicationExpanded memorymicroSD card (microSD/microSDHC) *13RatingsPower voltage24 VDC +25%/-20% (including ripple) *14Current consumption3.3 A or less (without the AI Lighting unit, and including the output load)1.8 A or less (AI Lighting unit, and including the output load) *15Environmental resistanceEnclosure ratingIP67 *16Ambient temperature0 to +50°C 32 to 122°F (No freezing) *17Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *18Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *18MaterialMain unit case: Aluminum die-casting/PBT/TPUIndicator light cover: TPUEthernet connector: Aluminum die-casting/LCPFront cover: Acrylic (hard coating)Power connector: Aluminum die-casting/LCPNameplate: PETWater proof cap for the Power connector: PC+ABS alloyWater proof cap for the Ethernet connector: PCWeightApprox. 300 g 10.59 oz (without the AI Lighting unit)Approx. 495 g 17.47 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 Color type only.*3 Monochrome type only.*4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs.*5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools.*6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.*7 Learning tool only.*8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).*9 Usable on the software for the IV3 Series (IV3-H1).*10 Make sure to keep a total of each output with 120 mA or less.*11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation.*12 Conformance Class B, applicable protocol: LLDP, SNMP.*13 Use only products recommended by KEYENCE.*14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple).*15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted.*16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted.*17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*18 Except when the dome attachment (IV3-D10) is mounted.

ModelIV3-500MATypeStandardInstalled distance50 mm 1.97" or more *1ToolsAvailable modesStandard mode / Sorting modeTool with standard modeLearning, Outline, Color area *2, Area *3, Edge pixels, Color average *2, Brightness average *3, Width, Diameter, Edge presence, Pitch,OCR, Color prohibit *4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob countNumber of toolsTotal: 65 tools *5Field of viewInstalled distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V) toInstalled distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V)Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)Image receiving elementType1/2.9 inch monochrome CMOSNumber of pixels1280 (H) × 960 (V)Image historyNumber of storable images100 images *6Save conditionsSelectable between NG only, NG and OK near threshold *7, and All *6Focus adjustmentAuto *4Image data transferTransfer destinationSelectable between SD card, FTP server and SFTP serverTransfer formatSelectable between bmp, jpeg, iv3p, and txt, and file names can be modifiedTransfer conditionsSelectable between NG only, NG and OK near threshold *8, and AllExposure time12 μs to 10 msAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *8RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errorsOutput monitor: ON/OFF status by output *8LightsIlluminationInfrared LEDLighting methodPulse lightingOther functionsImage capture functionDigital zoom (2×, 4×), HDR, High gain, Color filter *2, White balance *2, Brightness correction, AI captureTool functionsAdditional learning, Mask outline, Masking function, Color extraction/exclusion *2, Color histogram function *2, Monochrome histogram function *3, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator *9, Additional FTP/SFTP Image Information,Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUNIndicatorsOUT, TRIG, STATUS, LINK/ACT, SDInputTypeSwitchable between non-voltage input and voltage inputFor no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)Number of inputs6 ports, 3 ports are selectable as IN/OUTFunctionIN1: External trigger,IN2, IN3, I/O1 to I/O3: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypePhoto MOS relay output, N.O./N.C. SwitchableMaximum rating 30 V 50 mA, residual voltage 1.5 V or less *10Number of outputs6 ports, 3 ports are selectable as IN/OUTFunctionEnable by assigning the optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool,Error, SD card error, Variety discrimination result, Master judgment resultPower/I/OConnectorM12 12 pin A code Male connectorPoEPoE power Class 3/4/6  *11EthernetStandard1000BASE-T/100BASE-TXConnectorM12 8 pin X code Female connectorNetwork functionFTP client, SFTP clientInterface compatibilityBuilt-in EthernetEtherNet/IP®, PROFINET *12, TCP/IP non-procedure communicationExpanded memorymicroSD card (microSD/microSDHC) *13RatingsPower voltage24 VDC +25%/-20% (including ripple) *14Current consumption3.3 A or less (without the AI Lighting unit, and including the output load)1.8 A or less (AI Lighting unit, and including the output load) *15Environmental resistanceEnclosure ratingIP67 *16Ambient temperature0 to +50°C 32 to 122°F (No freezing) *17Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *18Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *18MaterialMain unit case: Aluminum die-casting/PBT/TPUIndicator light cover: TPUEthernet connector: Aluminum die-casting/LCPFront cover: Acrylic (hard coating)Power connector: Aluminum die-casting/LCPNameplate: PETWater proof cap for the Power connector: PC+ABS alloyWater proof cap for the Ethernet connector: PCWeightApprox. 300 g 10.59 oz (without the AI Lighting unit)Approx. 495 g 17.47 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 Color type only.*3 Monochrome type only.*4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs.*5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools.*6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.*7 Learning tool only.*8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).*9 Usable on the software for the IV3 Series (IV3-H1).*10 Make sure to keep a total of each output with 120 mA or less.*11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation.*12 Conformance Class B, applicable protocol: LLDP, SNMP.*13 Use only products recommended by KEYENCE.*14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple).*15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted.*16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted.*17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*18 Except when the dome attachment (IV3-D10) is mounted.

ModelIV3-600CATypeWide viewInstalled distance50 mm 1.97" or more *1ToolsAvailable modesStandard mode / Sorting modeTool with standard modeLearning, Outline, Color area *2, Area *3, Edge pixels, Color average *2, Brightness average *3, Width, Diameter, Edge presence, Pitch,OCR, Color prohibit *4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob countNumber of toolsTotal: 65 tools *5Field of viewInstalled distance 50 mm 1.97": 51 (H) × 38 (V) mm 2.01" (H) × 1.50" (V) toInstalled distance 3000 mm 118.11": 2730 (H) × 2044 (V) mm 107.48" (H) × 80.47" (V)Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)Image receiving elementType1/2.9 inch color CMOSNumber of pixels1280 (H) × 960 (V)Image historyNumber of storable images100 images *6Save conditionsSelectable between NG only, NG and OK near threshold *7, and All *6Focus adjustmentAuto *4Image data transferTransfer destinationSelectable between SD card, FTP server and SFTP serverTransfer formatSelectable between bmp, jpeg, iv3p, and txt, and file names can be modifiedTransfer conditionsSelectable between NG only, NG and OK near threshold *8, and AllExposure time12 μs to 10 msAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *8RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errorsOutput monitor: ON/OFF status by output *8LightsIlluminationWhite LEDLighting methodPulse lighting/ continuously lighting is switchable.Other functionsImage capture functionDigital zoom (2×, 4×), HDR, High gain, Color filter *2, White balance *2, Brightness correction, AI captureTool functionsAdditional learning, Mask outline, Masking function, Color extraction/exclusion *2, Color histogram function *2, Monochrome histogram function *3, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator *9, Additional FTP/SFTP Image Information,Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUNIndicatorsOUT, TRIG, STATUS, LINK/ACT, SDInputTypeSwitchable between non-voltage input and voltage inputFor no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)Number of inputs6 ports, 3 ports are selectable as IN/OUTFunctionIN1: External trigger,IN2, IN3, I/O1 to I/O3: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypePhoto MOS relay output, N.O./N.C. SwitchableMaximum rating 30 V 50 mA, residual voltage 1.5 V or less *10Number of outputs6 ports, 3 ports are selectable as IN/OUTFunctionEnable by assigning the optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool,Error, SD card error, Variety discrimination result, Master judgment resultPower/I/OConnectorM12 12 pin A code Male connectorPoEPoE power Class 3/4/6  *11EthernetStandard1000BASE-T/100BASE-TXConnectorM12 8 pin X code Female connectorNetwork functionFTP client, SFTP clientInterface compatibilityBuilt-in EthernetEtherNet/IP®, PROFINET *12, TCP/IP non-procedure communicationExpanded memorymicroSD card (microSD/microSDHC) *13RatingsPower voltage24 VDC +25%/-20% (including ripple) *14Current consumption3.3 A or less (without the AI Lighting unit, and including the output load)1.8 A or less (AI Lighting unit, and including the output load) *15Environmental resistanceEnclosure ratingIP67 *16Ambient temperature0 to +50°C 32 to 122°F (No freezing) *17Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *18Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *18MaterialMain unit case: Aluminum die-casting/PBT/TPUIndicator light cover: TPUEthernet connector: Aluminum die-casting/LCPFront cover: Acrylic (hard coating)Power connector: Aluminum die-casting/LCPNameplate: PETWater proof cap for the Power connector: PC+ABS alloyWater proof cap for the Ethernet connector: PCWeightApprox. 300 g 10.59 oz (without the AI Lighting unit)Approx. 495 g 17.47 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 Color type only.*3 Monochrome type only.*4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs.*5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools.*6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.*7 Learning tool only.*8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).*9 Usable on the software for the IV3 Series (IV3-H1).*10 Make sure to keep a total of each output with 120 mA or less.*11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation.*12 Conformance Class B, applicable protocol: LLDP, SNMP.*13 Use only products recommended by KEYENCE.*14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple).*15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted.*16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted.*17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*18 Except when the dome attachment (IV3-D10) is mounted.

ModelIV3-600MATypeWide viewInstalled distance50 mm 1.97" or more *1ToolsAvailable modesStandard mode / Sorting modeTool with standard modeLearning, Outline, Color area *2, Area *3, Edge pixels, Color average *2, Brightness average *3, Width, Diameter, Edge presence, Pitch,OCR, Color prohibit *4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob countNumber of toolsTotal: 65 tools *5Field of viewInstalled distance 50 mm 1.97": 51 (H) × 38 (V) mm 2.01" (H) × 1.50" (V) toInstalled distance 3000 mm 118.11": 2730 (H) × 2044 (V) mm 107.48" (H) × 80.47" (V)Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)Image receiving elementType1/2.9 inch monochrome CMOSNumber of pixels1280 (H) × 960 (V)Image historyNumber of storable images100 images *6Save conditionsSelectable between NG only, NG and OK near threshold *7, and All *6Focus adjustmentAuto *4Image data transferTransfer destinationSelectable between SD card, FTP server and SFTP serverTransfer formatSelectable between bmp, jpeg, iv3p, and txt, and file names can be modifiedTransfer conditionsSelectable between NG only, NG and OK near threshold *8, and AllExposure time12 μs to 10 msAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *8RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errorsOutput monitor: ON/OFF status by output *8LightsIlluminationInfrared LEDLighting methodPulse lightingOther functionsImage capture functionDigital zoom (2×, 4×), HDR, High gain, Color filter *2, White balance *2, Brightness correction, AI captureTool functionsAdditional learning, Mask outline, Masking function, Color extraction/exclusion *2, Color histogram function *2, Monochrome histogram function *3, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator *9, Additional FTP/SFTP Image Information,Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUNIndicatorsOUT, TRIG, STATUS, LINK/ACT, SDInputTypeSwitchable between non-voltage input and voltage inputFor no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)Number of inputs6 ports, 3 ports are selectable as IN/OUTFunctionIN1: External trigger,IN2, IN3, I/O1 to I/O3: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypePhoto MOS relay output, N.O./N.C. SwitchableMaximum rating 30 V 50 mA, residual voltage 1.5 V or less *10Number of outputs6 ports, 3 ports are selectable as IN/OUTFunctionEnable by assigning the optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool,Error, SD card error, Variety discrimination result, Master judgment resultPower/I/OConnectorM12 12 pin A code Male connectorPoEPoE power Class 3/4/6  *11EthernetStandard1000BASE-T/100BASE-TXConnectorM12 8 pin X code Female connectorNetwork functionFTP client, SFTP clientInterface compatibilityBuilt-in EthernetEtherNet/IP®, PROFINET *12, TCP/IP non-procedure communicationExpanded memorymicroSD card (microSD/microSDHC) *13RatingsPower voltage24 VDC +25%/-20% (including ripple) *14Current consumption3.3 A or less (without the AI Lighting unit, and including the output load)1.8 A or less (AI Lighting unit, and including the output load) *15Environmental resistanceEnclosure ratingIP67 *16Ambient temperature0 to +50°C 32 to 122°F (No freezing) *17Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *18Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *18MaterialMain unit case: Aluminum die-casting/PBT/TPUIndicator light cover: TPUEthernet connector: Aluminum die-casting/LCPFront cover: Acrylic (hard coating)Power connector: Aluminum die-casting/LCPNameplate: PETWater proof cap for the Power connector: PC+ABS alloyWater proof cap for the Ethernet connector: PCWeightApprox. 300 g 10.59 oz (without the AI Lighting unit)Approx. 495 g 17.47 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 Color type only.*3 Monochrome type only.*4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs.*5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools.*6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.*7 Learning tool only.*8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).*9 Usable on the software for the IV3 Series (IV3-H1).*10 Make sure to keep a total of each output with 120 mA or less.*11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation.*12 Conformance Class B, applicable protocol: LLDP, SNMP.*13 Use only products recommended by KEYENCE.*14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple).*15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted.*16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted.*17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*18 Except when the dome attachment (IV3-D10) is mounted.

ModelIV3-CP50Display panel5.7" TFT color LCD640 × 480 dot (VGA)BacklightMethodWhite LEDDurationApprox. 50000 hours (25 ˚C 77°F)Touch panelMethodAnalog resistiveActuating force0.8 N or lowerLanguagesEnglish / Japanese / German / Chinese (Simplified) / Chinese (Traditional) /Korean /Italian / French / Spanish / Portuguese / Czech / Hungarian / Polish / Thai *1IndicatorsPWR, SENSOREthernetStandard100BASE-TX*2ConnectorM12 4 pin connector*2Expanded memoryUSB flash memory*3RatingsPower voltage24 VDC ±10% (including ripple)Current consumption0.3 A or lessEnvironmental resistanceEnclosure ratingIP40Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85%RH (No condensation)*4Drop resistance1.3 m 4.3' over the concrete (2 times each in the arbitrary direction)Vibration resistance10 to 55 Hz, 0.7 mm 0.03" double amplitude, 2 hours each for X, Y, and Z axesMaterialMain unit case: PCPower connector: brass + Ni coatEthernet connector: Zinc + Ni coat, PAUSB connector cover: EPDMPen holder: PCHook for adapter: POMLED lamp cover: PCMounting adapter: PCStylus: POMWeightControl panel: Approx. 450 g 15.89 ozA mounted with the wall mounting adapter and the stylus: Approx. 485 g 17.12 oz*1 When connected to the IV3 Series. When connected to the IV/IV2 Series, the supported languages are the same as the IV2-CP50.*2 Especially for connecting to the IV3 Series, IV2 Series, and IV Series.*3 Use a product recommended by KEYENCE.*4 If 18 the ambient temperature exceeds 40°C 104°F, use the sensor head in the absolute humidity of 40°C 104°F 85% RH or lower.

ModelIV3-G120ToolsAvailable modesStandard mode / Sorting modeTool with standard modeLearning, Outline, Color area *1, Area *2, Edge pixels, Color average *1, Brightness average *2, Width, Diameter, Edge presence, Pitch, OCR,Color prohibit *1, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob countNumber of toolsTotal: 65 tools *3Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)Image historyNumber of storable images100 images *4Save conditionsSelectable between NG only, NG and OK near threshold *5, and All *4Image data transferTransfer destinationSelectable between SD card, FTP server, and SFTP serverTransfer formatSelectable between bmp, jpeg, iv3p, and txt, and file names can be modifiedTransfer conditionsSelectable between NG only, NG and OK near threshold *5, and AllAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *6RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errorsOutput monitor: ON/OFF status by output *6Other functionsImage capture functionDigital zoom (2×, 4×), HDR, High gain, Color filter *1, White balance *1, Brightness correction, AI captureTool functionsAdditional learning, Mask outline, Masking function, Color extraction/exclusion *1Color histogram function *1, Monochrome histogram function *2, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator *7,Additional FTP/SFTP Image Information, Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUNIndicatorsPWR/ERR, OUT, TRIG, STATUS, LINK/ACT, SDInputTypeSwitchable between non-voltage input and voltage inputFor no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)Number of inputs8 (IN1 to IN8)FunctionIN1: External trigger, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypePhoto MOS relay output, N.O./N.C. SwitchableMaximum rating 26.4 V 50 mA, residual voltage 1.5 V or less *8Number of outputs8 (OUT1 to OUT8)FunctionEnable by assigning the optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error, Variety discrimination result, Master judgment resultEthernetStandard1000BASE-T/100BASE-TXConnectorRJ-45 8pin connectorNetwork functionFTP client, SFTP clientInterface compatibilityBuilt-in EthernetEtherNet/IP®, PROFINET *9, TCP/IP non-procedure communicationCommunication unitEtherCAT®, CC-Link, DeviceNet®, RS-232C, PROFIBUS *10Expanded memorySD card (SD/SDHC) *11RatingsPower voltage24 VDC ±10% (including ripple)Current consumption2.2 A or less (including a communication unit, without the AI Lighting unit, and including the output load)3.4 A or less (including a communication unit, with the AI Lighting unit, and including the output load)Environmental resistanceAmbient temperature0 to +50°C 32 to 122°F (No freezing) *12Relative humidity35 to 85%RH (No condensation)MaterialMain unit case: PCI/O terminal block: PAEthernet connector: Copper alloy + Ni platingMain unit rear DIN rail fixing tab: POMPower connector: PA/POMSensor head connector: Zinc + Ni plating/PAMain unit rear heat sink: AluminumNameplate: PCWeightApprox. 300 g 10.59 oz*1 Color type only.*2 Monochrome type only.*3 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools.*4 Saves to the sensor amplifier’s internal memory. The images saved to the sensor amplifier can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.*5 Learning tool only.*6 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).*7 Usable on the software for the IV3 Series (IV3-H1).*8 Make sure to keep a total of each output with 160 mA or less.*9 Conformance Class B, Applicable protocol: LLDP, SNMP.*10 When a communication unit (DL Series) is connected.*11 Use only products recommended by KEYENCE.*12 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.

ModelIV3-G500CATypeStandardInstalled distance50 mm 1.97" or more *1Field of viewInstalled distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V)Installed distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V)(typical example)Image receiving elementType1/2.9 inch color CMOSNumber of pixels1280 (H) × 960 (V)Focus adjustmentAuto *2Exposure time12 μs to 9 msLightsIlluminationWhite LEDLighting methodPulse /continuous lighting is switchable.Indicators2 (the same display details for both indicators)Environmental resistanceEnclosure ratingIP67 *3Ambient temperature0 to +50°C 32 to 122°F (No freezing) *4Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *5Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *5MaterialMain unit case: Zinc die-casting, Front cover: Acrylic, Operation indicator cover: TPUWeightApprox. 75 g 2.65 oz (without the AI Lighting unit)Approx. 225 g 7.94 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*3 Except when the polarizing filter (OP-88642/OP-88643/OP-88646/OP-88647) is mounted.*4 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*5 Except when the dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV3-G500MATypeStandardInstalled distance50 mm 1.97" or more *1Field of viewInstalled distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V)Installed distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V)(typical example)Image receiving elementType1/2.9 inch monochrome CMOSNumber of pixels1280 (H) × 960 (V)Focus adjustmentAuto *2Exposure time12 μs to 9 ms *3LightsIlluminationInfrared LEDLighting methodPulse lightingIndicators2 (the same display details for both indicators)Environmental resistanceEnclosure ratingIP67 *4Ambient temperature0 to +50°C 32 to 122°F (No freezing) *5Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *6Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *6MaterialMain unit case: Zinc die-casting, Front cover: Acrylic, Operation indicator cover: TPUWeightApprox. 75 g 2.65 oz (without the AI Lighting unit)Approx. 225 g 7.94 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*3 When the AI Lighting unit is mounted, the maximum exposure time is 6.25 ms.*4 Except when the polarizing filter (OP-88642/OP-88643/OP-88646/OP-88647) is mounted.*5 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*6 Except when the dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV3-G600CATypeWide viewInstalled distance50 mm 1.97" or more *1Field of viewInstalled distance 50 mm 1.97": 51 (H) × 38 (V) mm 2.01" (H) × 1.50" (V)Installed distance 3000 mm 118.11": 2730 (H) × 2044 (V) mm 107.48" (H) × 80.47" (V)(typical example)Image receiving elementType1/2.9 inch color CMOSNumber of pixels1280 (H) × 960 (V)Focus adjustmentAuto *2Exposure time12 μs to 9 msLightsIlluminationWhite LEDLighting methodPulse /continuous lighting is switchable.Indicators2 (the same display details for both indicators)Environmental resistanceEnclosure ratingIP67 *3Ambient temperature0 to +50°C 32 to 122°F (No freezing) *4Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *5Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *5MaterialMain unit case: Zinc die-casting, Front cover: Acrylic, Operation indicator cover: TPUWeightApprox. 75 g 2.65 oz (without the AI Lighting unit)Approx. 225 g 7.94 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*3 Except when the polarizing filter (OP-88642/OP-88643/OP-88646/OP-88647) is mounted.*4 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*5 Except when the dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV3-G600MATypeWide viewInstalled distance50 mm 1.97" or more *1Field of viewInstalled distance 50 mm 1.97": 51 (H) × 38 (V) mm 2.01" (H) × 1.50" (V)Installed distance 3000 mm 118.11": 2730 (H) × 2044 (V) mm 107.48" (H) × 80.47" (V)(typical example)Image receiving elementType1/2.9 inch monochrome CMOSNumber of pixels1280 (H) × 960 (V)Focus adjustmentAuto *2Exposure time12 μs to 9 ms *3LightsIlluminationInfrared LEDLighting methodPulse lightingIndicators2 (the same display details for both indicators)Environmental resistanceEnclosure ratingIP67 *4Ambient temperature0 to +50°C 32 to 122°F (No freezing) *5Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *6Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *6MaterialMain unit case: Zinc die-casting, Front cover: Acrylic, Operation indicator cover: TPUWeightApprox. 75 g 2.65 oz (without the AI Lighting unit)Approx. 225 g 7.94 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program.*3 When the AI Lighting unit is mounted, the maximum exposure time is 6.25 ms.*4 Except when the polarizing filter (OP-88642/OP-88643/OP-88646/OP-88647) is mounted.*5 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*6 Except when the dome attachment (IV2-GD05/IV2-GD10) is mounted.

ModelIV3-H1Included softwareFor IV3 Series: IV3-Navigator, For IV2 Series: IV2-Navigator, For IV Series: IV-NavigatorSystem requirementsInterfaceEquipped with the Ethernet (1000BASE-T) interfaceOSWindows 11 Home/Pro/Enterprise Windows 10 Home/Pro/Enterprise Windows 7 (SP1 or higher) Home Premium/Professional/Ultimate;either OS above needs to be preinstalled*1LanguagesEnglish / Japanese / German / Chinese (Simplified) / Chinese (Traditional) /Korean /Italian / French / Spanish / Portuguese / Czech / Hungarian / Polish / Thai *2ProcessorNeeds to be compliant with system requirements for OS.Memory capacity4 GB or moreRequired capacity for installationMonitorResolution: 1024 × 768 pixel or higher,Display: High Color (16 bit) or higherOperating conditions.NET Framework 4.5.2 must be installed*3Microsoft Visual C++ 2017 Redistributable Package must be installed.*3*1 Windows 7/Windows 10: Supports 32-bit and 64-bit versions.*2 When connected to the IV3 Series. When connected to the IV/IV2 Series, the supported languages are the same as the IV2-H1.*3 If this software is not installed, it will be automatically installed when IV3-H1 is installed.

ModelIV3-L5CCompatible sensorIV3-500CALightsIlluminationWhite LEDPower supplyPower is supplied by the connected sensorEnvironmental resistanceEnclosure ratingIP67 *1Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85%RH (No condensation)MaterialCase: Aluminum die-castingFront cover: AcrylicWeightApprox. 195 g 6.88 oz*1 Applicable only when mounted to a compatible sensor. Except when the polarizing filter (OP-88644/OP-88645/OP-88646/OP-88647) is mounted.

ModelIV3-LG6CCompatible sensorIV3-G600CALightsIlluminationWhite LEDPower supplyPower is supplied by the connected sensorEnvironmental resistanceEnclosure ratingIP67 *1Ambient temperature0 to +50°C 32 to 122°F (No freezing)Relative humidity35 to 85%RH (No condensation)MaterialUnit case: Aluminum die-casting/PBTSensor head connector: Zinc + Ni plating/PAFront cover: AcrylicCable: PVC, Ni plating, TPEEWeightApprox. 150 g 5.30 oz*1 Applicable only when mounted to a compatible sensor. Except when the polarizing filter (OP-88644/OP-88645/OP-88646/OP-88647) is mounted.

ModelKV-M4GMemoryFlash ROMTypeSDHCMemory capacity4GBRead/Write cycles60,000 operations (each block)Operating temperature-25 to +85°CStorage temperature-40 to +85°C

ModelOP-87908TypeVertical mounting bracketWeightApprox. 20 g

ModelOP-87443TypeMonitor power cableCable endM8 4-pin / Strand wireLength2 m 6.6'

ModelOP-87444TypeMonitor power cableCable endM8 4-pin / Strand wireLength5 m 16.4'

ModelOP-87445TypePanel power cableCable endM8 4-pin - strand wireLength10 m 32.8'