Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 1 m 3.281 ft
Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal)
(at a sensing distance of 1 m)
Sensing object Opaque object of ø2 mm ø0.079 in or more
Minimum sensing object (Typical) Opaque object of ø0.3 mm ø0.012 in
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Repeatability Perpendicular to sensing axis: 0.05 mm 0.0020 in or less
Repeatability (Typical)(perpendicular to sensing axis) 0.01 mm 0.0004 in or less
(all area)
(Note)Typical values when the sensitivity adjuster is optimally adjusted.
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)

Regulatory compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-501(P), LS-501(P)-C2
(Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less.
This is because there is a possibility of sensing becoming unstable.)
Sensing range:H-SP mode 1m 3.281 ft
(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)
(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.
In addition, the sensing range is the possible setting range for the reflector.
The sensor can detect an object less than 0.01 m 0.033 ft away.
Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.
In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object.
The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)