The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area.With the same numbers of external components, the efficiency of the PAM8403 is much better than that of Class-AB cousins. It can extend the battery life, which makes it well-suited for portable applications.

The PAM8403 is available in SOP-16 package

The LM2902/2904 series amplifiers consist of four and two independent high-gain operational amplifiers with very low input offset voltage specification. They have been designed to operate from a single power supply over a wide range of voltages; however operation from split power supplies is also possible. They offer low power supply current independent of the magnitude of the power supply voltage. 

The LM2902/2904 series are characterized for operation from -40? to +125? and the dual devices are available in SO-8 and the quad devices available in SO-14 and TSSOP-14 with industry standard pin-outs. Both use green mold compound as standard.

Application(s)

Embedded system

Precision power supplies

Industrial control

The AS324/324A consist of four independent, high gain and internally frequency compensated operational amplifiers. They are specifically designed to operate from a single power supply. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Typical applications include transducer amplifiers, DC gain blocks and most conventional operational amplifier circuits. The AS324/324A series are compatible with industry standard 324. AS324A has more stringent input offset voltage than AS324. The AS324 is available in SOIC-14, DIP-14 and TSSOP-14 packages, AS324A is available in SOIC-14 package.

Application(s)

Battery Charger

Cordless Telephone

Switching Power Supply

The AS358/358A consist of two independent, high gain and internally frequency compensated operational amplifiers, they are specifically designed to operate from a single power supply. Operation from split power supply is also possible and the low power supply current drain is independent of the magnitude of the power supply voltages. Typical applications include transducer amplifiers, DC gain blocks and most conventional operational amplifier circuits. The AS358/358A series are compatible with industry standard 358. AS358A has more stringent input offset voltage than AS358.

Application(s)

Battery Charger

Cordless Telephone

Switching Power Supply

The AZ431-A is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature coefficient and low output impedance, which make it ideal substitute for Zener diode in applications such as switching power supply, charger and other adjustable regulators. The output voltage of AZ431-A can be set to any value between VREF (2.5V) and the corresponding maximum cathode voltage (36V). The AZ431-A precision reference is offered in two voltage tolerance: 0.4% and 0.8%.                                      Application(s)

Charger

Voltage Adapter

Switching Power Supply

Graphic Card

Precision Voltage Reference

High Speed SPDT Analog Switch with Compact Packages          The PI5A124 are analog switches designed for single-supply operation. These high-precision devices are ideal for low-distortion audio, video, signal switching and routing. These switches are fully specified with +5V, and +3.3V supplies. With +5V, they guarantee <10Ω On-Resistance. On-Resistance matching between channels is within 2Ω. On-Resistance flatness is less than 55Ω over the specified range. These switches also guarantee fast switching speeds (tON <20ns). These products are available in 6-pin SOT23 plastic packages for operation over the industrial (-40oC to +85oC) temperature range.

1:4 Clock Driver for Intel PCI Express Chipsets   PI6C20400 is a high-speed, low-noise differential clock buffer designed to be companion to PI6C410B. The device distributes the differential SRC clock from PI6C410B to four differential pairs of clock outputs either with or without PLL. The clock outputs are controlled by input selection of SRC_STOP#, PWRDWN# and SMBus, SCLK and SDA. When input of either SRC_STOP# or PWRDWN# is low, the output clocks are Tristated. When PWRDWN# is low, the SDA and SCLK inputs must be Tri-stated.

PCIe 3.0, 2-Lane (4-Channel), Differential 2:1 Mux/DeMux. 3.3V                                 

The PI3PCIE3412A is an 8 to 4 differential channel multiplexer/demultiplexer switch. This solution can switch 2 full PCI Express® 3.0, lanes to one of two locations. Using a unique design technique, Diodes has been able to minimize the impedance of the switch such that the attenuation observed through the switch is mininal. The unique design technique also offers a layout targeted for PCI Express signals, which minimizes the channel to channel skew as well as channel to channel crosstalk as required by the PCI Express specification. PI3PCIE3412 can also be used for application up to 12Gbps.

16 Output LVDS Fanout Buffer                           

The PI6C5921516 is a high performance LVDS fanout buffer device which supports up to 1.5GHz frequency. This device is ideal for systems that need to distribute low jitter LVDS clock signals to multiple destinations.                               

Application(s)

Networking systems including switches and routers

High frequency backplane based computing and telecom platforms

4.0A GLASS PASSIVATED BRIDGE RECTIFIER                     Glass Passivated Die Construction

 High Case Dielectric Strength of 1500VRMS

 Low Reverse Leakage Current

 Surge Overload Rating to 150A Peak

 Ideal for Printed Circuit Board Applications

 UL Listed Under Recognized Component

Index, File Number E94661                             Case: GBU

 Case Material: Molded Plastic. UL Flammability

Classification Rating 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020C

 Terminals: Plated Leads. Solderable per MIL-STD-202,

Method 208

 Lead Free Plating (Tin Finish)

 Polarity: Marked on Body

 Mounting: Through Hole for #6 Screw

 Mounting Torque: 5.0 Inch-pounds Maximum

 Ordering Information: See Last Page

 Marking: Date Code and Type Number

 Weight: 6.6 grams (approximate)

1.0A RECTIFIER                                                                                                       

Diffused Junction

 High Current Capability and Low Forward Voltage Drop

 Surge Overload Rating to 30A Peak

 Low Reverse Leakage Current

 Lead Free Finish, RoHS Compliant                                               

    Case: DO-41

 Case Material: Molded Plastic. UL Flammability Classification

      Rating 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020D

 Terminals: Finish - Bright Tin. Plated Leads Solderable per

MIL-STD-202, Method 208

 Polarity: Cathode Band

 Ordering Information: See Page 2

 Marking: Type Number

 Weight: 0.30 grams (Approximate)

1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER         

 • Guard Ring Die Construction for Transient Protection 

• Low Leakage Current 

• Low Forward Voltage Drop                                   

• Case: SOD123 

• Case Material: Molded Plastic, “Green” Molding Compound. 

UL Flammability Classification Rating 94V-0 

• Moisture Sensitivity: Level 1 per J-STD-020 

• Terminals: Finish  Matte Tin Finish Annealed over Alloy 42 

Leadframe. Solderable per MIL-STD-202, Method 208 

• Polarity: Cathode Band 

• Weight: 0.01 grams (Approximate)

1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER                Glass Passivated Die Construction for High Reliability

 Surge Overload Rating to 30A Peak

 Ideally Suited for Automated Assembly                      

    Case: SMA/SMB

 Case Material: Molded Plastic. UL Flammability Classification 

Rating 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020

 Terminals: Lead-Free Plating (Matte Tin Finish). Solderable per 

MIL-STD-202, Method 208 

 Polarity: Cathode Band or Cathode Notch

 Weight: SMA - 0.064 grams (Approximate)

 SMB - 0.093 grams (Approximate)

3.0A SURFACE MOUNT FAST RECOVERY RECTIFIER                • Glass Passivated Die Construction 

• Fast Recovery Time for High Efficiency 

• Surge Overload Rating to 100A Peak 

• Ideally Suited for Automatic Assembly                   

• Case: SMB, SMC 

• Case Material: Molded Plastic. UL Flammability Classification 

Rating 94V-0 

• Moisture Sensitivity: Level 1 per J-STD-020 

• Terminals: Lead Free Plating (Matte Tin Finish). Solderable per 

MIL-STD-202, Method 208 

• Polarity: Cathode Band or Cathode Notch 

• Weight: SMB 0.093 grams (approximate) 

 SMC 0.21 grams (approximate) 

   1.0A SURFACE MOUNT ULTRA-FAST RECTIFIER                 

 Glass Passivated Die Construction 

 Ultra-Fast Recovery Time for High Efficiency 

 Surge Overload Rating to 30A Peak 

 High Current Capability 

 Ideally Suited for Automated Assembly     

  Case: SMA 

 Case Material: Molded Plastic. UL Flammability Classification  Rating 94V-0 

 Moisture Sensitivity: Level 1 per J-STD-020 

 Terminals: Lead Free Plating (Matte Tin Finish). Solderable per  MIL-STD-202, Method 208 

 Polarity: Cathode Band or Cathode Notch 

 Weight: 0.064 grams (Approximate) 

The AL1692 is a high performance, high power factor, high efficiency, and high current precision buck-boost and flyback dimmable LED controller/drivers for triac dimmable LED lamp applications. The AL1692 topology provides an accurate output current over wide line and load regulation. The wide switching frequency operates at boundary conduction mode (BCM) to ease EMI/EMC design and testing, to meet the latest regulatory standards.

The AL1692 controller with external MOSFET can support higher output power application, up to 25W. The AL1692 LED drivers have AL1692-30BA with 400V/3A and AL1692-20C with 600V/2A MOSFET. The AL1692 platform solutions can cover both 120Vac and 230Vac applications. The AL1692 has the built-in thermal fold-back protection trigger point to automatically reduce output current. Other protection features enhance LED lighting system's safety and reliability.

The AL1692 dimming curve is compliant with the NEMA SSL6 standard. The AL1692 applies to a wide range of dimmers, including leading edge and trailing edge dimmer, to achieve deep dimming down to 1%.

The AL1692 controller is available in SO-8 package. The Integrated MOSFET version AL1692-30BA and AL1692-20C are available in SO-7 package

LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1A (Switch) SOT-25      The AL8805 is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to 8 LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 6V to 36V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The AL8805 switches at frequency up to 1MHz. This allows the use of small size external components, hence minimizing the PCB area needed.Maximum output current of AL8805 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.4V or lower at CTRL switches off the output MOSFET simplifying PWM dimming    

0.5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER             • Low Forward Voltage Drop 

• Guard Ring Die Construction for Transient Protection 

• High Conductance                                         

 • Case: SOD-123 

• Case Material: Molded Plastic. UL Flammability Classification 

Rating 94V-0 

• Moisture Sensitivity: Level 1 per J-STD-020D 

• Lead Free Plating (Matte Tin Finish annealed over Alloy 42 

leadframe) Solderable per MIL-STD-202, Method 208 

• Polarity: Cathode Band 

• Marking Information: See Page 3 

• Ordering Information: See Page 3 

• Weight: 0.01 grams (approximate)

 Guard Ring Die Construction for Transient Protection

 Ideally Suited for Automated Assembly

 Low Power Loss, High Efficiency                           

  Case: SMA 

 Case Material: Molded Plastic. “Green” Molding Compound. 

UL Flammability Classification 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020

 Terminals: Lead Free Plating (Matte-Tin Finish). 

Solderable per MIL-STD-202, Method 208 

 Polarity: Cathode Band

 Weight: 0.064 grams (Approximate

SURFACE MOUNT SCHOTTKY BARRIER DIODE                      Low Forward Voltage Drop 

 Guard Ring Construction for Transient Protection 

 Negligible Reverse Recovery Time 

 Low Reverse Capacitance 

 Ultra-Small Surface Mount Package                         

   Case: SOD523 

 Case Material: Molded Plastic, "Green" Molding Compound. UL 

Flammability Classification Rating 94V-0 

 Moisture Sensitivity: Level 1 per J-STD-020 

 Terminals: Lead Free Plating (Matte Tin Finish). Solderable per 

MIL-STD-202, Method 208 

 Polarity: Cathode Band 

 Weight: 0.002 grams (approximate

40V SURFACE MOUNT SCHOTTKY BARRIER DIODE               

  A surface mount Schottky Barrier Diode featuring low forward voltage drop suitable for high frequency rectification and reverse voltage protection.

Application(s)

Mobile telecomms, PCMIA & SCSI

DC-DC Conversion

High frequency rectification

switching diode                                          • Case: SOD123

• Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Matte Tin Finish annealed over Alloy 42 leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208

• Polarity: Cathode Band

• Weight: 0.01 grams (approximate)                       

 • Fast Switching Speed

• Surface Mount Package Ideally Suited for Automated Insertion

• For General Purpose Switching Applications

• High Conductance

• Totally Lead-Free & Fully RoHS Compliant 

• Halogen and Antimony Free. “Green” Device

• Qualified to AEC-Q101 Standards for High Reliability

300mW DUAL SURFACE MOUNT ZENER DIODE                       Dual Zeners in Common Anode Configuration

 300mW Power Dissipation Rating

 Ideally Suited for Automated Insertion

  VZ for Both Diodes in One Case is  5%

 Common Cathode Style Available: See DZ23 Series         Case: SOT23

 Case Material: Molded Plastic, “Green” Molding Compound. 

UL Flammability Classification Rating 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020

 Terminals: Matte Tin Finish Annealed over Alloy 42 Leadframe 

(Lead Free Plating). Solderable per MIL-STD-202, Method 208

 Polarity: See Diagram

 Approximate Weight: 0.008 grams

SURFACE MOUNT FAST SWITCHING DIODE ARRAY                 

• Fast Switching Speed 

• Ultra-Small Surface Mount Package 

• For General Purpose Switching Applications 

• High Conductance                                       

• Case: SOT363 

• Case Material: Molded Plastic, “Green” Molding Compound. 

UL Flammability Classification Rating 94V-0 

• Moisture Sensitivity: Level 1 per J-STD-020D 

• Terminals: Matte Tin Finish annealed over Alloy 42 leadframe 

(Lead Free Plating). Solderable per MIL-STD-202, Method 208 

• Polarity: See Diagram 

• Weight: 0.006 grams (approximate

SURFACE MOUNT FAST SWITCHING DIODE                                          

Fast Switching Speed

 Small Surface Mount Package 

 For General Purpose Switching Applications

 Totally Lead-Free & Fully RoHS Compliant     

 Halogen and Antimony Free. “Green” Device 

 Qualified to AEC-Q101 Standards for High Reliability

 PPAP Capable                                   

 Case: SOD323 

 Case Material: Molded Plastic, “Green” Molding Compound.

UL Flammability Classification Rating 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020

 Terminals: Matte Tin Finish Annealed Over Alloy 42 Leadframe 

(Lead-Free Plating). Solderable per MIL-STD-202, Method 208

 Polarity: Cathode Band

 Weight: 0.006 grams (Approximate)

Diodes - General Purpose, Power, Switching Small Signal Diode 

DIODE GEN PURP 75V 150MA SOD323F                   

  • Fast Switching Speed

• Small Surface Mount Package 

• For General Purpose Switching Applications

• High Conductance

• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3) 

• Qualified to AEC-Q101 Standards for High Reliability

• PPAP Capable (Note 4)

8A SBR®  SUPER BARRIER RECTIFIER POWERDI                 

    Ultra Low Forward Voltage Drop 

 Patented Super Barrier Rectifier Technology 

 Soft, Fast Switching Capability

 150°C Operating Junction Temperature                   Case: POWERDI5 

 Case Material: Molded Plastic, “Green” Molding compound. UL 

Flammability Classification Rating 94V-0 

 Moisture Sensitivity: Level 1 per J-STD-020 

 Terminals: Finish - Matte Tin annealed over Copper leadframe. 

Solderable per MIL-STD-202, Method 208 

 Polarity: See Below 

 Weight: 0.093 grams (approximate)