The TL-POE10R is a self-developed PoE separator developed by TP-LINK, which complies with the IEEE 802.3af standard and can separate the power and data signals transmitted over the network cable. The TL-POE10R can be used in conjunction with IEEE 802.3af-compliant power supply devices (such as TP-LINK's TL-POE150S, TL-SF1008P, and TL-SG3424P) to provide data and power for network devices that do not support PoE. TL-POE10R can output 5V/9V/12V three voltages, and can be used with power supply equipment, which can flexibly expand home and office networks without being limited by the layout of power lines. IEEE 802.3af compliant It provides 5V/9V/12VDC three-step output The maximum transmission distance is up to 100 meters Gigabit Ethernet port Plug and play, no management required

TL-POE100S adopts non-standard PoE design, providing 1 input port (LAN port) and 1 output port (PoE port), the output voltage is 53.5VDC, the output power of the whole machine is up to 16W, and the transmission distance is up to 100m. The TL-POE100S power supply is built-in, no configuration required, plug and play. It can provide power supply and data transmission for IP cameras, APs and other devices that directly support non-standard PoE power supply. It can also be used with a PoE splitter to supply power and transmit data to common devices that do not support PoE power supply. Non-standard PoE design, 53.5VDC output The power supply is up to 16W The power supply distance is up to 100m Built-in power supply, plug and play, no management required

TL-POE150S is a jumper power supply device independently developed by TL-LINK, which fully complies with the IEEE 802.3af standard and can load electric energy on the network cable for transmission, with a maximum transmission distance of 100m. The TL-POE150S automatically detects and identifies IEEE 802.3af-compliant powered devices and automatically matches the output power to power them. By using it with the TL-POE10R, it can expand the traditional power line network and reduce the use of power lines. It complies with the IEEE 802.3af PoE power supply standard and has an output power of 15.4W The PoE power supply distance can reach 100m Gigabit Ethernet port Comes with a 53.5V power adapter Automatically detect and identify the powered device and automatically match the output power Plug and play, no management required

The standard PoE splitter TL-POE160R is fully compliant with the IEEE 802.3af standard, which separates the power and data signals transmitted over the network cable, and provides two outputs: 12V/1.0A and 9V/1.0A. By working with standard PoE power supply equipment (TL-SF1009P, TL-SG3424P, TL-POE160S, etc.), it can provide stable power and data transmission for non-PoE devices, and flexibly expand the network without being limited by the layout of power lines. IEEE 802.3af compliant It provides 12V/1.0A and 9V/1.0A outputs The maximum transmission distance is up to 100 meters

TL-POE170S is a PoE power supply device independently developed by TL-LINK, which conforms to the IEEE 802.3af/at standard, and can load electric energy on the network cable for transmission, with a maximum transmission distance of 100m. The TL-POE170S automatically detects and identifies IEEE 802.3af/at compliant powered devices and automatically matches the output power to power them. IEEE 802.3af/at compliant The maximum output power is up to 30W The maximum power supply distance is up to 100m Automatically detect and identify the powered device and automatically match the output power Gigabit Ethernet port External 53.5V power adapter Plug and play, no management required

TL-SF1005P is an unmanaged PoE switch independently developed by TP-LINK, with 4 100 Gigabit ports supporting PoE+ power supply, compliant with IEEE 802.3af/at standard, with a single-port PoE power of up to 30W and a maximum PoE output power of 62W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. 5 x 10/100M adaptive RJ45 ports, ports 1~4 support IEEE 802.3af/at standard PoE power supply The single-port POE power can reach 30W, and the maximum PoE output power of the whole machine is 62W Supports IEEE802.3X full-duplex flow control and backpressure half-duplex flow control Auto MDI/MDIX is supported All ports are capable of wire-speed forwarding All 100 megabits Five 10/100 Base-T RJ45 ports are available. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Four 10/100 Base-T RJ45 ports support PoE+ power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 62W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. When the output power of the whole device exceeds the standard, the PoE port will be disconnected from the power supply of the last power-on port to prevent the device from overloading. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TL-SF1009P is an unmanaged PoE switch independently developed by TP-LINK, with 8 100 Gigabit ports supporting IEEE 802.3af/at standard PoE+ power supply, a single-port PoE power of up to 30W, and the maximum PoE output power of the whole machine is increased to 62W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. Eight 10/100 Base-T RJ45 ports support PoE power supply 1 x 10/100 Base-T RJ45 uplink port The PoE power supply power of the whole machine is increased to 62W, and the PoE power supply power of a single port reaches 30W Supports IEEE 802.3af/at PoE power supply standard PoE power delivery ports support the priority mechanism The housing supports wall-mounted holes All 100 megabits Nine 10/100 Base-T RJ45 ports are available. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100 Base-T RJ45 ports support PoE power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is increased to 62W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the host has good heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TL-SF1010P is an unmanaged PoE switch independently developed by TP-LINK, with 8 100 Gigabit ports supporting IEEE 802.3af/at standard PoE+ power supply, a single port PoE power of up to 30W, and the maximum PoE output power of the whole machine is increased to 72W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. Eight 10/100 Base-T RJ45 ports support PoE power supply Two 10/100 Base-T RJ45 uplink ports The PoE power supply power of the whole machine is increased to 72W, and the PoE power supply power of a single port reaches 30W Supports IEEE 802.3af/at PoE power supply standard PoE power delivery ports support the priority mechanism The housing supports wall-mounted holes All 100 megabits Provides 10 x 10/100 Base-T RJ45 ports. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100 Base-T RJ45 ports support PoE power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is increased to 62W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the host has good heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. The equipment meets the national CCC standard, fully meets the safety requirements, and is safe and reliable to use. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TL-SG1005P is an unmanaged PoE switch independently developed by TP-LINK, with 4 Gigabit ports supporting PoE+ power supply, complying with IEEE 802.3af/at standard, with a single-port PoE power of up to 30W and a maximum PoE output power of 60W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. 5 x 10/100/1000M adaptive RJ45 ports, ports 1~4 support IEEE 802.3af/at standard PoE power supply The single-port POE power can reach 30W, and the maximum PoE output power of the whole machine is 60W Supports IEEE802.3X full-duplex flow control and backpressure half-duplex flow control Auto MDI/MDIX is supported All ports are capable of wire-speed forwarding Rich port specifications Provides 5 x 10/100/1000M RJ45 ports. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function It provides 4 PoE power supply ports and a PoE output power of 60W to meet the needs of PoE power supply networks such as home visual security and wireless coverage. It complies with the IEEE 802.3af/at PoE power supply standard, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. When the remaining power is insufficient, the PoE port will be prioritized to disconnect the power supply from the last power-on port to prevent the device from being overloaded. The equipment is stable and reliable The low-power design of the host has good heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act). Comply with network standards IEEE 802.3、IEEE 802.3u、IEEE 802.3x Compliant with IEEE 802.3af/at PoE power supply standard

TL-SG1218P is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1~16 support PoE+ function, comply with IEEE 802.3af/at standard, single-port PoE power up to 30W, and the maximum PoE output power of the whole machine is 180W. It supports three working modes: standard switching, video surveillance, and VLAN isolation. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, simple and convenient to use, suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to build cost-effective PoE networks. The whole machine provides 18 10/100/1000Base-T RJ45 ports 16 Gigabit RJ45 ports support PoE+ power supply The maximum PoE power supply power of the whole machine is 180W, and the maximum PoE power supply power of a single port is 30W PoE power delivery ports support the priority mechanism It supports three working modes: video surveillance, VLAN isolation, and standard switching Full Gigabit ports Provides 18 10/100/1000Base-T RJ45 ports. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function The 16 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the PoE power supply requirements of visual security, teleconferencing systems, wireless coverage and other scenarios. In line with IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 180W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. Three modes of operation The standard switching mode ---- all ports communicate freely, which is suitable for common data transmission environment; The video surveillance mode ---- specially designed for surveillance application scenarios to improve the stuttering and mosaic phenomenon in the surveillance network. VLAN isolation mode --- suitable for scenarios where wireless APs are connected, suppressing network storms and improving network performance. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. The power supply independently developed by TP-LINK and the high redundancy design provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power), PoE power warning indicator (PoE Max), and port status indicator (Link/Act).

TL-SG1226P is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1~24 support PoE+ function, in line with IEEE 802.3af/at standard, single-port PoE power up to 30W, and the maximum PoE output power of the whole machine is 225W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, simple and convenient to use, suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to build cost-effective PoE networks. 24 x 10/100/1000Base-T RJ45 ports (PoE+ power conceded) 2 independent Gigabit SFP ports The maximum PoE power supply power of the whole machine is 225W, and the maximum PoE power supply power of a single port is 30W PoE power delivery ports support the priority mechanism Full Gigabit ports Provides 24 x 10/100/1000Base-T RJ45 ports and 2 independent Gigabit SFP ports. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function The 24 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the PoE power supply requirements for scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 225W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power), PoE power warning indicator (PoE Max), port status indicator (Link/Act), and rate indicator (1000Mbps).

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 5 x 10/100/1000Base-T RJ45 ports Gigabit RJ45 ports 1~4 support IEEE 802.3af/at standard PoE power supply The maximum PoE power supply power of the whole machine is 60 W, and the maximum PoE power supply power of a single port is 30 W Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection It supports three working modes: cloud management, VLAN isolation, and standard switching Full Gigabit ports The TL-SG2005P provides five 10/100/1000Mbps RJ45 ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. It supports standard PoE power supply function TL-SG2005P ports 1~4 support PoE+ power supply, follow the IEEE 802.3af/at standard, and meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SG2005P is 60W, and the maximum PoE power supply power of a single port is 30W. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 9 x 10/100/1000Base-T RJ45 ports, 1 x Gigabit SFP optical port Gigabit RJ45 ports 1~8 support IEEE 802.3af/at standard PoE power supply The maximum PoE power supply power of the whole machine is 57W, and the maximum PoE power supply power of a single port is 30W Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection It supports three working modes: cloud management, VLAN isolation, and standard switching Full Gigabit ports The TL-SG2210P provides 9 x 10/100/1000Mbps RJ45 ports and 1 x 1000Mbps SFP port. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. It supports standard PoE power supply function TL-SG2210P ports 1~8 support PoE+ power supply and follow the IEEE 802.3af/at standard to meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SG2210P is 57W, and the maximum PoE power supply power of a single port is 30W. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 16 x 10/100/1000Base-T RJ45 ports (supports standard PoE+ power supply) 2 x 1000Mbps SFP ports The maximum PoE power supply power of the whole machine is 180W, and the maximum PoE power supply power of a single port is 30W Compliant with IEEE 802.3af/at PoE power supply standard, the port supports power supply priority Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection It supports three working modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only versions 4.0 and 9.0 of this model support ERPS Full Gigabit ports The TL-SG2218P provides 16 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. It supports standard PoE power supply function TL-SG2218P ports 1~16 support PoE+ power supply and follow the IEEE 802.3af/at standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SG2218P is 180W, and the maximum PoE power supply power of a single port is 30W. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 24 x 10/100/1000Base-T RJ45 ports (supports standard PoE+ power supply) 2 x 1000Mbps SFP ports The maximum PoE power supply power of the whole machine is 225W, and the maximum PoE power supply power of a single port is 30W Compliant with IEEE 802.3af/at PoE power supply standard, the port supports power supply priority Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection It supports three working modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only version 7.0 and above support ERPS Full Gigabit ports The TL-SG2226P provides 24 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. It supports standard PoE power supply function TL-SG2226P ports 1~24 support PoE+ power supply, follow the IEEE 802.3af/at standard, and meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SG2226P is 225W, and the maximum PoE power supply power of a single port is 30W. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" 10 Gigabit Uplink Cloud Management PoE Switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily started by novices without the need for professional IT operation and maintenance personnel; using a new generation of high-performance hardware and software platform, it provides flexible and cost-effective Gigabit + 10 Gigabit ports, and supports flexible 802.1Q VLAN, port monitoring, port aggregation, QoS, Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 24 x 10/100/1000Mbps RJ45 ports (support standard PoE+ power supply) 4 x 1/2.5/10Gbps SFP+ ports The maximum PoE power supply power of the whole machine is 220W, and the maximum PoE power supply power of a single port is 30W Compliant with IEEE 802.3af/at PoE power supply standard, the port supports power supply priority Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 10 Gigabit uplink port The TL-SH2428P provides 24 ports of 10/100/1000Mbps RJ45 and 4 ports of 1/2.5/10Gbps SFP+. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. Supports standard PoE+ power supply function TL-SH2428P ports 1~24 support PoE+ power supply and follow the IEEE 802.3af/at standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SH2428P is 220W, and the maximum PoE power supply power of a single port is 30W. Supports fast PoE and permanent PoE. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

TP-LINK's newly developed 5 series 10 Gigabit uplink Layer 3 network management PoE switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full Gigabit access and uplink ports, support Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, easy to manage and maintain, meet users' requirements for easy management, high security and low cost networking of network equipment, suitable for campus, hotel and enterprise campus network access, aggregation, Core a variety of application scenarios. 48 x 10/100/1000Base-T RJ45 ports, PoE+ power supply 6 independent SFP+ ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display The maximum PoE power supply power of the whole machine is 495W, and the maximum PoE power supply power of a single port is 30W Supports dynamic RIP routing, static routing, and ARP proxy DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast listening, and IPv6 are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol, dynamically generates and updates routing tables, and solves the routing problem of small and medium-sized networks after subnets are divided. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security is supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function The PoE model supports PoE+ power supply and follows the IEEE 802.3af/at standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TL-SE5630PB is a newly developed and launched 5 series 2.5 Layer 3 managed PoE switch by TP-LINK, which adopts a new generation of high-performance hardware and software platform, provides flexible 2.5G access and cost-effective 10 Gigabit uplink ports, supports IEEE 802.3af/at/bt PoE standards, and has a single-port PoE power of up to 90W and a maximum PoE output power of 760W. The device also supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, which is easy to manage and maintain, and can meet the PoE networking requirements of hotels, campuses, and enterprise campuses to upgrade WiFi 6 wireless networks. 24 x 2.5G/1G/100M/10M adaptive RJ45 ports, 6 x 10G/2.5G/1G SFP+ ports All 24 RJ45 ports support IEEE 802.3bt standard PoE power supply and are compatible with IEEE 802.3at/af standard The maximum PoE output power of the whole machine is up to 760W, and the maximum PoE output power of a single port is up to 90W It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, ARP proxy, and DHCP server Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported 2.5G access, 10 Gigabit uplink It provides 24 2.5G RJ45 electrical ports, which are backward compatible with 1000/100/10M to meet the high-speed access requirements of terminal devices (such as APs). Six 10G/2.5G/1G SFP+ optical ports are provided. All ports are capable of wire-speed forwarding, giving full play to performance. 90W for a single port, 760W for the whole machine, and high-power PoE++ power supply All 24 RJ45 ports support IEEE 802.3bt PoE power supply and are backward compatible with IEEE 802.3af/at standard. The maximum PoE output power of the whole machine is 760W, and the maximum PoE output power of the port is 90W, which meets the high-power PoE power supply requirements of visual security, teleconferencing system, wireless coverage and other scenarios. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. Strong business processing capabilities It supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. Easy operation and maintenance It supports TP-LINK commercial flat tilts, making it easy to remotely manage and maintain equipment and reduce on-site O&M costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TL-SF1006LP is an unmanaged PoE switch independently developed by TP-LINK, with 4 100 Gigabit ports supporting PoE+ power supply, complying with IEEE 802.3af/at standard, with a single-port PoE power of 30W and a maximum PoE output power of 41W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. 6 x 10/100M adaptive RJ45 ports, ports 1~4 support IEEE 802.3af/at standard PoE power supply The single-port POE power can reach 30W, and the maximum PoE output power of the whole machine is 41W Supports IEEE802.3X full-duplex flow control and backpressure half-duplex flow control Auto MDI/MDIX is supported All ports are capable of wire-speed forwarding All 100 megabits Six 10/100 Base-T RJ45 ports are available. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Four 10/100 Base-T RJ45 ports support PoE+ power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 41W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TL-SF1006PM is an unmanaged PoE switch independently developed by TP-LINK, with 4 100 Gigabit ports supporting PoE+ power supply, in line with IEEE 802.3af/at standard, with a single-port PoE power of 30W and a maximum PoE output power of 41W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. 6 x 10/100M adaptive RJ45 ports, ports 1~4 support IEEE 802.3af/at standard PoE power supply The single-port POE power can reach 30W, and the maximum PoE output power of the whole machine is 41W Supports IEEE802.3X full-duplex flow control and backpressure half-duplex flow control Auto MDI/MDIX is supported All ports are capable of wire-speed forwarding All 100 megabits Six 10/100 Base-T RJ45 ports are available. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Four 10/100 Base-T RJ45 ports support PoE+ power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 41W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TL-SF1009PE is an unmanaged PoE switch independently developed by TP-LINK, with 8 100 Gigabit ports supporting PoE+ power supply, in line with IEEE 802.3af/at standard, with a single port PoE power of up to 30W and a maximum PoE output power of 125W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. Eight 10/100 Base-T RJ45 ports support PoE+ power supply 1 x 10/100 Base-T RJ45 uplink port The PoE power supply power of the whole machine is up to 125W, and the PoE power supply power of a single port is up to 30W PoE power delivery ports support the priority mechanism All 100 megabits Nine 10/100 Base-T RJ45 ports are available. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100 Base-T RJ45 ports support PoE+ power supply to meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 125W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. The equipment meets the national CCC standard, fully meets the safety requirements, and is safe and reliable to use. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TP-LINK's newly developed PoE switching module includes 5/9 ports, 100 Gigabit/Gigabit products, supports IEEE 802.3af/at PoE power supply standard, is designed for home weak current box, easy to install, plug and play, and meets the needs of households for PoE power supply network. Nine 10/100 Base-T RJ45 ports are available RJ45 ports 1~8 support IEEE 802.3af/at PoE power supply standard The PoE power supply power of the whole machine is up to 56W, and the PoE power supply power of a single port is up to 30W PoE power delivery ports support the priority mechanism It is designed for family weak current box, and the size is 225mm*74mm*24mm The spacing between the transverse mounting screws is 213mm, and the spacing between the longitudinal mounting screws is 50mm Rich port specifications PoE switching module series products provide multiple port combinations of 5FE, 9FE, 5GE, and 9GE. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Provide 4/8 PoE power supply ports to meet the needs of PoE power supply networks such as home visual security and wireless coverage. It complies with the IEEE 802.3af/at PoE power supply standard, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. Designed for weak current boxes Modular strip design, Mini body, perfect fit for the mainstream weak current box/information box on the market. The shell size is 225mm*74mm, the spacing between the transverse mounting screws is 213mm, and the spacing of the longitudinal mounting screws is 50mm. The equipment is stable and reliable The low-power design of the host has good heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. The equipment meets the national CCC standard, fully meets the safety requirements, and is safe and reliable to use. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act, PoE).

TL-SF1010P is a steel-shell unmanaged PoE switch independently developed by TP-LINK, with 8 100 Gigabit ports supporting PoE power supply, in line with IEEE 802.3at/af standard, with a single-port PoE power of 30W and a maximum PoE output power of 62W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, no configuration required, simple and convenient to use, meet the needs of high-density PoE power supply network environment, suitable for hotels, campuses, factory dormitories, small and medium-sized enterprises to build a cost-effective network. 10 x 10/100M adaptive RJ45 ports, ports 1~8 support IEEE 802.3at/af standard PoE power supply The single-port POE power can reach 30W, and the maximum PoE output power of the whole machine is 62W Supports IEEE802.3X full-duplex flow control and backpressure half-duplex flow control Auto MDI/MDIX is supported PoE ports support a prioritization mechanism All 100 megabits Provides 10 x 10/100 Base-T RJ45 ports. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100 Base-T RJ45 ports support PoE power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. It complies with the IEEE 802.3at/af PoE power supply standard, and the maximum PoE output power of the whole machine is 62W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TP-LINK's newly developed PoE switching module includes 5/9 ports, 100 Gigabit/Gigabit products, supports IEEE 802.3af/at PoE power supply standard, is designed for home weak current box, easy to install, plug and play, and meets the needs of households for PoE power supply network. Provides 5 x 10/100/1000Mbps RJ45 ports RJ45 ports 1~4 support IEEE 802.3af/at PoE power supply standard The PoE power supply power of the whole machine is up to 57W, and the PoE power supply power of a single port is up to 30W PoE power delivery ports support the priority mechanism It is designed for family weak current box, and the size is 225mm*74mm*24mm The spacing between the transverse mounting screws is 213mm, and the spacing between the longitudinal mounting screws is 50mm Rich port specifications PoE switching module series products provide multiple port combinations of 5FE, 9FE, 5GE, and 9GE. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Provide 4/8 PoE power supply ports to meet the needs of PoE power supply networks such as home visual security and wireless coverage. It complies with the IEEE 802.3af/at PoE power supply standard, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. Designed for weak current boxes Modular strip design, Mini body, perfect fit for the mainstream weak current box/information box on the market. The shell size is 225mm*74mm, the spacing between the transverse mounting screws is 213mm, and the spacing of the longitudinal mounting screws is 50mm. The equipment is stable and reliable The low-power design of the host has good heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. The equipment meets the national CCC standard, fully meets the safety requirements, and is safe and reliable to use. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act, PoE).

TL-SG1009PH is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1-8 support PoE+ function, comply with IEEE 802.3af/at standard, single-port PoE power up to 30W, and the maximum PoE output power of the whole machine is 76W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. The TL-SG1009PH is simple and convenient to use, no configuration required, plug-and-play, and can flexibly expand home and office networks without being limited by the layout of power lines. Eight 10/100/1000Base-T RJ45 ports support PoE+ power supply One 10/100/1000Base-T RJ45 uplink port The maximum PoE power supply power of the whole machine is 76W, and the maximum PoE power supply power of a single port is 30W PoE power delivery ports support the priority mechanism Full Gigabit ports Provides 9 x 10/100/1000Base-T RJ45 ports, including 8 PoE ports and 1 Uplink port. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 76W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the main machine, the all-steel shell naturally dissipates heat, and the stable operation of the product can be ensured without fan, and it is quieter without noise. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable 76W PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. The user can easily understand the working status of the device through the power indicator (Power) and the port status indicator (Link/Act).

TP-LINK's newly developed PoE switching module includes 5/9 ports, 100 Gigabit/Gigabit products, supports IEEE 802.3af/at PoE power supply standard, is designed for home weak current box, easy to install, plug and play, and meets the needs of households for PoE power supply network. Provides 9 x 10/100/1000Mbps RJ45 ports RJ45 ports 1~8 support IEEE 802.3af/at PoE power supply standard The PoE power supply power of the whole machine is up to 54W, and the PoE power supply power of a single port is up to 30W PoE power delivery ports support the priority mechanism It is designed for family weak current box, and the size is 225mm*74mm*24mm The spacing between the transverse mounting screws is 213mm, and the spacing between the longitudinal mounting screws is 50mm Rich port specifications PoE switching module series products provide multiple port combinations of 5FE, 9FE, 5GE, and 9GE. All ports support non-blocking wire-speed forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Provide 4/8 PoE power supply ports to meet the needs of PoE power supply networks such as home visual security and wireless coverage. It complies with the IEEE 802.3af/at PoE power supply standard, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. Designed for weak current boxes Modular strip design, Mini body, perfect fit for the mainstream weak current box/information box on the market. The shell size is 225mm*74mm, the spacing between the transverse mounting screws is 213mm, and the spacing of the longitudinal mounting screws is 50mm. The equipment is stable and reliable The low-power design of the host has good heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. The equipment meets the national CCC standard, fully meets the safety requirements, and is safe and reliable to use. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act, PoE).

TL-SG1210DP is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1~8 support PoE+ function, in line with IEEE 802.3af/at standard, single-port PoE power up to 30W, and the maximum PoE output power of the whole machine is 67W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, simple and convenient to use, suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to build cost-effective PoE networks. Eight 10/100/1000Base-T RJ45 ports support PoE+ power supply 2 x 10/100/1000Base-T RJ45 ports The maximum PoE power supply power of the whole machine is 67W, and the maximum PoE power supply power of a single port is 30W PoE power delivery ports support the priority mechanism It supports three working modes: video surveillance, VLAN isolation, and standard switching Full Gigabit ports Provides 10 x 10/100/1000Base-T RJ45 ports. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 67W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. Three modes of operation The standard switching mode ---- all ports communicate freely, which is suitable for common data transmission environment; The video surveillance mode ---- specially designed for surveillance application scenarios to improve the stuttering and mosaic phenomenon in the surveillance network. VLAN isolation mode --- suitable for scenarios where wireless APs are connected, suppressing network storms and improving network performance. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 8 x 10/100/1000Base-T RJ45 ports Gigabit RJ45 ports 1~8 support IEEE 802.3af/at standard PoE power supply The maximum PoE power supply power of the whole machine is 67W, and the maximum PoE power supply power of a single port is 30W Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection It supports three working modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management Full Gigabit ports The TL-SG2008MP provides eight 10/100/1000Mbps RJ45 ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. It supports standard PoE power supply function TL-SG2008MP ports 1~8 support PoE+ power supply and comply with the IEEE 802.3af/at standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SG2008MP is 67W, and the maximum PoE power supply power of a single port is 30W. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 16 x 10/100/1000Base-T RJ45 ports (supports standard PoE+ power supply) The maximum PoE power supply power of the whole machine is 110W, and the maximum PoE power supply power of a single port is 30W Compliant with IEEE 802.3af/at PoE power supply standard, the port supports power supply priority Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection It supports three working modes: cloud management, VLAN isolation, and standard switching *Bluetooth function of this model requires a dedicated adapter TL-NUB1200 *The Bluetooth function of this model needs to be supported after the version is upgraded *Only version 3.0 and above support ERPS Full Gigabit ports The TL-SG2016MP offers 16 x 10/100/1000Mbps RJ45 ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. It supports standard PoE power supply function TL-SG2016MP ports 1~16 support PoE+ power supply and follow the IEEE 802.3af/at standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SG2016MP is 110W, and the maximum PoE power supply power of a single port is 30W. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 24 x 10/100/1000Base-T RJ45 ports (supports standard PoE+ power supply) The maximum PoE power supply power of the whole machine is 190W, and the maximum PoE power supply power of a single port is 30W Compliant with IEEE 802.3af/at PoE power supply standard, the port supports power supply priority Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection It supports three working modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only versions 8.0 and above support ERPS Full Gigabit ports TL-SG2024MP provides 24 x 10/100/1000Mbps RJ45. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. It supports standard PoE power supply function TL-SG2024MP ports 1~24 support PoE+ power supply and comply with the IEEE 802.3af/at standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SG2024MP is 190W, and the maximum PoE power supply power of a single port is 30W. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.