The TP-LINK TL-U8 game streaming switch contains 8 USB 2.0 ports, which must be connected to the mobile device with a special data cable, and connected to the network through a Gigabit RJ45 interface to realize the wired Internet access of the mobile device, and obtain a lower latency and more stable and smooth Internet experience than wireless Internet access. 8 USB 2.0 ports for wired high-speed Internet access The USB port provides 5V/1A charging externally Gigabit uplink port, high-speed forwarding, no lag in game live streaming Compatible with iOS/Android system, with special data cable, suitable for a large number of mobile devices It provides two working modes: standard switching and VLAN isolation to adapt to different network environments The switch can be switched by flipping the switch Desktop housing, plug-and-play, no management required Port performance Provides one Gigabit RJ45 uplink port to achieve wire-speed forwarding. Provides 8 USB 2.0 ports for wired high-speed Internet access; Each USB port provides 5V/1A charging; Two modes of operation It provides a mode switching switch, which supports two working modes: "standard switching" and "VLAN isolation", and optimizes and supports a variety of application scenarios. Simple to use Tabletop housing, plug-and-play, no management required, dynamic LED indicators for easy status indication and troubleshooting.

TL-SG1048 is TP-LINK's fully gigabit unmanaged switch product designed for Internet cafes, enterprises, campuses and smart communities, providing 48 x 10/100/1000M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, plug and play, can be racked. 48 x 10/100/1000M adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported Support MAC address self-learning and full-duplex working mode Plug and play, no management required, rack-mounted Port performance Provides 48 10/100/1000M adaptive RJ45 ports, all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Simple to use 19-inch standard rack-mounted, plug-and-play, no management required, and dynamic LED indicators provide simple working status alerts and troubleshooting.

TL-SG1226 is a Layer 2 fully gigabit unmanaged Ethernet switch product independently developed by TP-LINK, providing 24 x 10/100/1000M RJ45 ports and 2 Gigabit SFP fiber module expansion slots, with line-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability. 24 x 10/100/1000M adaptive RJ45 ports, 2 x Gigabit SFP fiber module expansion slots All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported It provides three working modes: standard switching, VLAN isolation, and network cloning to adapt to different network environments The switch can be switched by flipping the switch Plug and play, rack-mountable Port performance It provides 24 x 10/100/1000M adaptive RJ45 ports and 2 Gigabit SFP fiber module expansion slots, all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Three modes of operation It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking. Simple to use The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 5 x 10/100/1000Base-T RJ45 ports Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation Supports cable detection and loopback protection It supports three modes: cloud management, VLAN isolation, and standard switching Full Gigabit ports The TL-SG2005 provides five 10/100/1000Mbps RJ45 ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 8 x 10/100/1000Base-T RJ45 ports Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation Supports cable detection and loopback protection It supports three modes: cloud management, VLAN isolation, and standard switching Full Gigabit ports The TL-SG2008 provides eight 10/100/1000Mbps RJ45 ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 16 x 10/100/1000Base-T RJ45 ports Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation Supports cable detection and loopback protection It supports three modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only version 6.0 and above of this model supports ERPS Full Gigabit ports The TL-SG2016 provides 16 10/100/1000Mbps RJ45 ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely. Easy to install Support plug and play Rack mount is supported

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 24 x 10/100/1000Base-T RJ45 ports Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation Supports cable detection and loopback protection It supports three modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only version 6.0 and above of this model supports ERPS Full Gigabit ports The TL-SG2024 provides 24 ports of 10/100/1000Mbps RJ45. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed and launched 2 series web management switches use a new generation of high-performance hardware and software platforms, provide flexible and cost-effective full gigabit ports, support flexible 802.1Q VLAN, port monitoring, port aggregation, QoS, bandwidth control and other common functions, easy to manage and maintain, suitable for campus, hotel and enterprise campus network access application scenarios. 48 x 10/100/1000Base-T RJ45 ports 802.1Q VLAN, MTU VLAN, and port VLAN are supported Supports QoS, bandwidth control, and storm suppression Supports port aggregation, port monitoring, port isolation, and port traffic statistics Supports cable detection and loopback protection It supports three modes: web management, VLAN isolation, and standard switching Full Gigabit ports Provide 4/8/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users. Simple and practical network management functions The device can be managed and maintained through the web interface. 802.1Q VLAN, MTU VLAN, and port VLAN are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and three priority modes based on ports, 802.1P, and DSCP to optimize bandwidth configuration. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. Port mirroring is supported, and data from a port is forwarded to the mirrored port for network monitoring. Port monitoring is supported, and the traffic information of each port is counted to facilitate traffic monitoring and network anomaly analysis. It supports bandwidth control, configures port data input/output transmission rates, and reasonably allocates and utilizes bandwidth. Storm suppression is supported to limit the broadcast traffic allowed to be received by the port to prevent broadcast storms from seriously slowing down network performance. One-click to switch working modes Web management mode: The switch supports network management functions such as VLANs, port aggregation, and port monitoring, and can be managed and maintained through the web interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, so ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 4 x 10/100/1000Base-T RJ45 ports 1 Gigabit SFP optical port Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port aggregation, port traffic statistics, port monitoring, and port isolation It supports three modes: cloud management, VLAN isolation, and standard switching Full Gigabit ports The TL-SG2105 provides 4 x 10/100/1000Mbps RJ45 ports and 1 x 1000Mbps SFP port. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 8 x 10/100/1000Base-T RJ45 ports 2 Gigabit SFP optical ports Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation It supports three modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only version 3.0 and above support ERPS Full Gigabit ports The TL-SG2210 provides 8 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 16 x 10/100/1000Base-T RJ45 ports 2 Gigabit SFP optical ports Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation It supports three modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only version 3.0 and above support ERPS Full Gigabit ports The TL-SG2218 provides 16 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 24 x 10/100/1000Base-T RJ45 ports 2 Gigabit SFP optical ports Support remote management of business cloud APP and web It supports ERPS ring network protocol, RPL configuration, supports 5 ring networks, and convergence time ≤ 50ms It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation It supports three modes: cloud management, VLAN isolation, and standard switching *Only version 3.0 and above of this model supports cloud management *Only version 3.0 and above support ERPS Full Gigabit ports The TL-SG2226 provides 24 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

TP-LINK's newly developed 3 series full gigabit network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support complete security protection mechanisms, perfect ACL/QoS policies and flexible VLAN functions, are easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, and are suitable for campus, hotel and enterprise campus network access and aggregation in a variety of application scenarios. 8 x 10/100/1000Base-T RJ45 ports 2 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication IEEE 802.1Q VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Supports port security, port monitoring, and port isolation Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 3 series full gigabit network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support complete security protection mechanisms, perfect ACL/QoS policies and flexible VLAN functions, are easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, and are suitable for campus, hotel and enterprise campus network access and aggregation in a variety of application scenarios. 16 x 10/100/1000Base-T RJ45 ports 2 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication IEEE 802.1Q VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Supports port security, port monitoring, and port isolation Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 3 series full gigabit network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support complete security protection mechanisms, perfect ACL/QoS policies and flexible VLAN functions, are easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, and are suitable for campus, hotel and enterprise campus network access and aggregation in a variety of application scenarios. 24 x 10/100/1000Base-T RJ45 ports 2 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication IEEE 802.1Q VLAN, QoS, ACL, spanning tree, and multicast are supported Supports port security, port monitoring, and port isolation Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 3 series full gigabit network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support complete security protection mechanisms, perfect ACL/QoS policies and flexible VLAN functions, are easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, and are suitable for campus, hotel and enterprise campus network access and aggregation in a variety of application scenarios. 24 x 10/100/1000Base-T RJ45 ports 4 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication IEEE 802.1Q VLAN, QoS, ACL, spanning tree, and multicast are supported Supports port security, port monitoring, and port isolation Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 3 series full gigabit network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support complete security protection mechanisms, perfect ACL/QoS policies and flexible VLAN functions, are easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, and are suitable for campus, hotel and enterprise campus network access and aggregation in a variety of application scenarios. 48 x 10/100/1000Base-T RJ45 ports 4 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication IEEE 802.1Q VLAN, QoS, ACL, spanning tree, and multicast are supported Supports port security, port monitoring, and port isolation Cloud management, web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 5 series full gigabit layer 3 network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, suitable for campus, hotel and enterprise campus network access, aggregation, Core a variety of application scenarios. 8 x 10/100/1000Base-T RJ45 ports 2 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, and ARP proxy DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/12 (optical port)/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capability to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol, dynamically generates and updates routing tables, and solves the routing problem of small and medium-sized networks after subnets are divided. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance It supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 5 series full gigabit layer 3 network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, suitable for campus, hotel and enterprise campus network access, aggregation, Core a variety of application scenarios. 16 x 10/100/1000Base-T RJ45 ports 2 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, and ARP proxy DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/12 (optical port)/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capability to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol, dynamically generates and updates routing tables, and solves the routing problem of small and medium-sized networks after subnets are divided. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance It supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 5 series full gigabit layer 3 network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, suitable for campus, hotel and enterprise campus network access, aggregation, Core a variety of application scenarios. 24 x 10/100/1000Base-T RJ45 ports 4 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, and ARP proxy DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/12 (optical port)/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capability to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol, dynamically generates and updates routing tables, and solves the routing problem of small and medium-sized networks after subnets are divided. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance It supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 5 series full gigabit layer 3 network management switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full gigabit access and uplink ports, support layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, easy to manage and maintain, meet users' needs for easy management, high security and low cost networking of network equipment, suitable for campus, hotel and enterprise campus network access, aggregation, Core a variety of application scenarios. 48 x 10/100/1000Base-T RJ45 ports 4 independent Gigabit SFP ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, and ARP proxy DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported Full Gigabit ports The whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/12 (optical port)/16/24/48 multi-specification port products, all ports have gigabit wire-speed forwarding capability to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol, dynamically generates and updates routing tables, and solves the routing problem of small and medium-sized networks after subnets are divided. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance It supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed full-gigabit stacked Layer 3 network management switch adopts a new generation of high-performance hardware and software platform, provides flexible and cost-effective full-gigabit access and uplink ports, supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, is easy to manage and maintain, and meets users' needs for easy management, high security and low cost networking of network equipment. Core a variety of application scenarios. 24 x 10/100/1000Base-T RJ45 ports 4 independent Gigabit SFP ports It supports TP-LINK commercial cloud platform management Stacking is supported, up to 8 stacking units OSPF/RIP dynamic routing, static routing, and ARP proxy are supported DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported Full Gigabit ports It supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. Strong business processing capabilities OSPFv2, OSPFv3, RIP, and RIPng dynamic routing protocols are supported, and routing tables are dynamically generated and updated to solve routing problems after small and medium-sized networks are divided into subnets. IPV4 and IPV6 static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. Easy operation and maintenance It supports TP-LINK commercial cloud platform management and easily realizes remote O&M. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 3 series Gigabit upper network management switches adopt a new generation of high-performance hardware and software It provides flexible 100 Gigabit access and cost-effective Gigabit uplink ports, supports complete security protection mechanisms, perfect ACL/QoS policies and rich VLAN functions, is easy to manage and maintain, and is widely used in China Small business, hotel, and campus network access and aggregation application scenarios. 8 x 10/100Base-T RJ45 ports 1 x 10/100/1000Base-T RJ45 port 1 independent Gigabit SFP port Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication IEEE 802.1Q VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Supports port security, port monitoring, and port isolation Web management, CLI command line, and SNMP are supported 100 Gigabit access, Gigabit uplink The full series supports the combination of "100 Gigabit Ethernet port + Gigabit Ethernet port/optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. 8/16/24/48 multi-specification port products are provided, and all ports have wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TP-LINK's newly developed 3 series Gigabit uplink management switches adopt a new generation of high-performance hardware and software platforms, provide flexible 100 Gigabit access and cost-effective Gigabit uplink ports, support complete security protection mechanisms, perfect ACL/QoS policies and rich VLAN functions, are easy to manage and maintain, and are widely used in small and medium-sized enterprises, hotels and campus network access and aggregation application scenarios. 24 x 10/100Base-T RJ45 ports 2 x 10/100/1000Base-T ports Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication IEEE 802.1Q VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Supports port security, port monitoring, and port isolation Web management, CLI command line, and SNMP are supported 100 Gigabit access, Gigabit uplink The full series supports the combination of "100 Gigabit Ethernet port + Gigabit Ethernet port/optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. 8/16/24/48 multi-specification port products are provided, and all ports have wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. PoE power supply function (only supported by PoE models). The PoE model supports the IEEE 802.3af/at PoE power supply standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface. Easy operation and maintenance Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TL-SF1005M is a 5-port 100 Gigabit Ethernet switch with a molded case, providing five 10/100M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, plug and play. Provide 5 x 10/100M adaptive RJ45 ports Molded case body, small and exquisite The two-color injection molding process reflects technology and beauty LED panel indicator to dynamically display device connection and operation status The port supports automatic flipping, which is more convenient to use MAC address self-learning is supported High-speed transmission, stable online Five 10/100M adaptive RJ45 ports are provided, and all ports can achieve wire-speed forwarding. Enterprise-level standards are used to build traffic switches, with comprehensive performance optimization and overall product performance. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Small and exquisite, two-color injection molding Adopt a square shell design, uphold the simple design philosophy; The body size is only 72mm x 65mm x 24.5mm, and the length of the body is smaller than that of a bank card, saving users every inch of space; Creative Germany introduces two-color injection molding process, and the surface is crystal clear like a feather coat; Versatile mist gray is selected, and the color is calm and elegant like gray lead; Polishing the perfect R angle arc, the feel is delicate and comfortable like jade; Innovative craftsmanship and design aesthetics complement each other, reflecting the perfect combination of technology and beauty. plug and play Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting.

TL-SF1016L is a two-layer manageable corridor access switch product developed by TP-LINK for cell, campus and other networks, providing 16 10/100M adaptive RJ45 ports, each port supports MDI/MDIX automatic flip function and can achieve wire-speed forwarding. The switch supports features such as port-based VLANs, 802.1Q tag VLAN-based policies, port-based and 802.1p priority-based QoS policies, and port rate limiting, making it suitable for cost-effective solutions for implementing high-reliability corridor access. At the same time, the switch provides two management ports to meet local management requirements, and the uplink port adopts lightning protection design, which has good manageability and environmental adaptability. 16 x 10/100M adaptive RJ45 ports All ports are capable of wire-speed forwarding It supports 6 levels of port rate limiting to flexibly control user bandwidth Port isolation, port VLAN, and 802.1Q tag VLAN are supported Support local management, graphical client configurator Built-in switching power supply, effectively resist voltage fluctuations, uplink port lightning protection design The body is lightweight, easy to install, and can be mounted on the rack Simple and practical management Provide graphical user configuration program, simple and easy to use; Provide two management ports for local management; It supports the import/export of configuration files, one-time configuration, and multiple uses, which can greatly reduce the workload of network administrators. Port rate limiting The egress and ingress rates of each port can be limited to 6 levels of port rate limits between 256kbps~8Mbps to meet the needs of bandwidth management. VLAN management Ports can only communicate with uplink ports to meet the isolation requirements between users. It supports port-based VLAN mode, which can be divided into different network regions according to needs, which is simple and convenient. It supports 802.1Q Tag VLANs, which can realize VLAN division across switches and meet the requirements of network area division in a larger range. QoS Port-based and 802.1p-based priority modes are supported, which can prioritize the forwarding of important service data (such as video and voice) and improve network performance. Hardware performance The uplink port is designed for lightning protection, which greatly reduces the economic loss caused by lightning damage to the user. The low-power, fanless design effectively reduces the noise of the equipment and improves the reliability of the product. Built-in switching power supply, 100-240V wide voltage working range, effectively resist voltage fluctuations; All-steel shell design, easy to install, rack-mounted.

TL-SG1005+ is a molded 5-port Gigabit Ethernet switch with 5 x 10/100/1000M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, plug and play. 5 x 10/100/1000M adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported Support MAC address self-learning and full-duplex working mode Desktop molded housing, plug and play, no management required Port performance Five 10/100/1000M adaptive RJ45 ports are provided, and all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting.

TL-SG1005D is a fully gigabit unmanaged switch product, providing five 10/100/1000M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, plug and play. 5 x 10/100/1000M adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported Support MAC address self-learning and full-duplex working mode Desktop housing, plug-and-play, no management required Port performance Five 10/100/1000M adaptive RJ45 ports are provided, and all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting.

TL-SG1005M is a molded 5-port Gigabit Ethernet switch with five 10/100/1000M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, plug and play. 5 x 10/100/1000M adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported Support MAC address self-learning and full-duplex working mode Desktop molded housing, plug and play, no management required Port performance Five 10/100/1000M adaptive RJ45 ports are provided, and all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting.

TL-SG1005U is a newly designed molded case 5-port Gigabit Ethernet switch, providing 5 x 10/100/1000Mbps adaptive RJ45 ports, all ports support wire-speed forwarding and auto-rollover, plug and play. Provides 5 x 10/100/1000Mbps adaptive RJ45 ports All ports support wire-speed forwarding and automatic rollover Plug and play, no management required Tabletop plastic case, small and simple Two-color process, reflecting technology and beauty Port performance Five 10/100/1000M adaptive RJ45 ports are provided, and all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting. Two-tone craftsmanship, simple and exquisite Creatively introduced two-color injection molding process, the surface of the upper cover is crystal clear, and the polishing is perfect R angle arc, and the feel is delicate and comfortable like jade. Design aesthetics and innovative craftsmanship complement each other to give products a unique and stylish quality.