MOTIX™ TLE9843-2QX is a part of the TLE984x product family. The TLE984x product family integrates an Arm® Cortex® M0 microcontroller core along with relay drivers, high side switches, LIN transceiver and a power supply system that enables the device to operate at the vehicle battery level.

The TLE984x family offers scalability in terms of Flash memory sizes ranging from 36kB to 64kB with pin-compatible devices. The TLE984x family was specifically designed to fit to a wide range of LIN-slave applications where a small package form factor and a minimum number of external components are essential, e.g. window lift. 

The TLE984x product family is offered in a leadless VQFN-48 package to save board space.

Summary of Features:

Arm® Cortex® M0 MCU

System clock up to 40MHz

52kB Flash memory, including 4K EEPROM emulation

4KB RAM

2 High-Side & 2 Low-Side Switches with PWM capability

5V power supply output

Integrated LIN transceiver compatible with LIN standard 2.2 and SAE J2602-supports fast programming via LIN

8-bit ADC with 7 channels for Voltage and Temperature supervision

10-bit ADC with 13 channels (6 Analog Inputs, 5 HV Monitor inputs and battery sense)

On chip oscillator & PLL

PWM signal generator and 16 bit timers

XMC4400 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex™-M4. As one of its key features it offers a high-resolution PWM unit with a tiny resolution of 150ps. This unique peripheral makes it especially suitable for digital power conversion in applications like solar inverters as well as SMPS and uninterruptible power supplies (UPS). Other applications are motor controllers, sense&control and IO devices for factory automation and user interface systems (HMI). XMC4400 is supported by Infineon's integrated development platform DAVE™ 3, which makes convenient, fast and application-orientated software development possible.                             

Summary of Features:

ARM® Cortex™-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)

8-channel DMA + dedicated DMAs for USB and Ethernet

Supply voltage range: 3.13 - 3.63V

USB 2.0 full-speed on-the-go

CPU Frequency: 120MHz

eFlash:512kB including hardware ECC

80kB SRAM

Package: TQFP-64

4xΔΣ-Demodulator

Temperature range: -40°.....85°

10/100 Ethernet MAC (/w IEEE 1588)

2x CAN, 64 MO

USIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]

32-bit Microcontrollers with ARM® Cortex®-M0 with smart application oriented features. The XMC1200 series belongs to the XMC1000 Family of industrial microcontrollers based on the ARM Cortex-M0 processor core. The XMC1200 series devices are optimized for LED Lighting applications and Human-Machine interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency.

Summary of Features:

32KB Flash, 16KB RAM

Supply voltage range 1.8 - 5.5 V

4 x 16-bit timers

10 channel 12-bit ADC, 2 x parallel sampling

2 channel USIC (configurable to SPI, UART, IIC, IIS)

LED brightness & color control module (BCCU)

2 x Comparators

Core frequency: 32[MHZ]

Peripherals clock: 64[MHZ]

Temperature Sensor

Pseudo Random Number Gererator

Real Time Clock

Watch Dog Timer

PG-TSSOP-16

Temperature range: -40 - 105°C

32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. XMC1000 is the number one choice for bringing traditional 32-bit designs to the next level, addressing a broad application spectrum from typical 32-bit applications up to digital power conversion and even field-oriented motor control. XMC1300 family can integrate all the control and analog interface functions required for sensor less Field Oriented Control (FOC), brushless (BLDC), brushed DC and PMSM motors.

Summary of Features:

64KB Flash, 16KB RAM

Supply voltage range: 1.8 - 5.5V

MATH co-processor for CORDIC & HW Divide

8 x 16-bit special purpose timers, dead time generation

Hall Sensor & Encoder I/F

LED brightness & color control module (BCCU)

12 channel 12-bit ADC, 2 x parallel sampling

2 channel USIC (configurable to SPI, UART, IIC, IIS)

3 x Comparators

Peripherals Clock: 64 [MHZ]

Temperature Sensor

Pseudo Random Number Gererator

Real Time Clock

Watch Dog Timer

PG-TSSOP-38

Temperature range: -40 - 105°C

Analog comparators with only 3 mv input offset voltage and a propagation delay of 30 ns

XMC4500 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex®-M4 core resulting in a power pack for energy-efficient industrial applications.

XMC4500 controllers feature a configurable peripheral set that allow to tailor the device to specific application needs. To capitalize fully on this flexibility, Infineon offers an industry-proven development environment DAVE™ that greatly eases SW development. DAVE™ 3 hosts a graphical user interface, low-level drivers, application libraries, an auto code generation engine and interfaces to generic or customer-selected development tools.                                 

Summary of Features:

ARM® Cortex®-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)

IEEE 1588 compliant Ethernet MAC

USB 2.0 full-speed on-the-go

CPU Frequency: 120MHz

eFlash: 1,024kB including hardware ECC

160kB SRAM

Package: PG-LQFP-144

USIC 6ch [Quad SPI, SCI/UART, I²C, I²S, LIN]

3x CAN, 64 MO

4x ΔΣ-Demodulator

Supply voltage range: 3.13 - 3.63V

Long-term availability with >15 years

Temperature range: -40°......125°    

The XMC4700 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4700 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications.             

Summary of Features:

ARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC

4 channel ΔΣ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range: -40 - 125°C

Safety package supporting SIL-2/3

The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities.                                                  Summary of Features:                                            ARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC4 channel ΔΣ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC

4 channel ΔΣ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC Interface

The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities.                                                  Summary of Features:                                            ARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC4 channel ∆Σ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC

4 channel △Σ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC Interface

The XMC4100/4200 series belongs to the XMC4000 family of industrial microcontrollers based on the ARM Cortex-M4 processor core. the XMC4100/4200 series of microcontrollers take advantage of Infineon's decades of experience in microcontroller design, providing an optimized solution to meet the performance challenges of today's embedded control applications. The XMC4100/4200 series devices combine the extended functionality and performance of the ARM Cortex-M4 core with powerful on-chip peripheral subsystems and on-chip memory units.                                                 Summary of Features:

256KBFlash, 40 KB Ram

Supply voltage range: 3.13 - 3.63V

USIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]

1x PWM Timers (CCU8), 16-64Bit 8ch + Dead-Time

2x CAN, 64 MO

Peripherals Clock: 80 [MHZ]

Core frequency: 80 [MHZ]

Motor Control Hall and Encoder Interface

Industrial Connectivity

Package: VQFN-48

Temperature range: -40°… 125°

High Resolution PWM 150ps

Long Term Availability with >15 years

Free DAVE™ IDE and DAVE Apps

32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. The XMC1400 series devices are optimized for motor control, power conversion and LED Lighting applications and Human-Machine Interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency. The performance of XMC1400 will be increased with 70% over existing XMC1000 due to the 48 [MHz] of the core frequency and the 2 Can nodes interfaces.                                             

Summary of Features:

128KB Flash, 16KB RAM

Core frequency: 48[MHz]

Peripherals clock: 96 [MHZ]

Supply voltage range: 1.8 - 5.5 V

96MHz MATH co-processor for CORDIC & HW Divide

8x 96MHz 16-bit special purpose timers, dead time generation

Hall Sensor & Encoder I/F

LED brightness & color control module (BCCU)

12 channel 12-bit ADC, 2 x parallel sampling

2 channel USIC (configurable to SPI, UART, IIC, IIS)

3 x comparators

Temperature sensor

Pseudo random number generator

Real time clock

Watch dog timer

PG-TSSOP-38

Temperature range: -40 - 105°C

70%+ performance over existing XMC1000