Potential Applications:

Air Conditioner

Dishwasher

Fan

PFC

Pump

Washing Machine

KA9238HA1(sleeve) Kaku KAKU AC axial flow sleeve FAN 92*92*38mm ,AC/DC AC,Size(MM) 92*92*38,Bearing Sleeve ,Voltage(V) 110/120,Frequency(Hz) 50/60,Current(A) 0.1/0.08,Power(W) 20/18,Speed(RPM) 2700/3200,Max Air Flow(CFM) 18/22,Max Static Pressure(Inch-H2O) 0.12/0.15,Noise(dB) 30/32,Weight(g) 210

MOTIX™ TLE9843-2QX is a part of the TLE984x product family. The TLE984x product family integrates an Arm® Cortex® M0 microcontroller core along with relay drivers, high side switches, LIN transceiver and a power supply system that enables the device to operate at the vehicle battery level.

The TLE984x family offers scalability in terms of Flash memory sizes ranging from 36kB to 64kB with pin-compatible devices. The TLE984x family was specifically designed to fit to a wide range of LIN-slave applications where a small package form factor and a minimum number of external components are essential, e.g. window lift. 

The TLE984x product family is offered in a leadless VQFN-48 package to save board space.

Summary of Features:

Arm® Cortex® M0 MCU

System clock up to 40MHz

52kB Flash memory, including 4K EEPROM emulation

4KB RAM

2 High-Side & 2 Low-Side Switches with PWM capability

5V power supply output

Integrated LIN transceiver compatible with LIN standard 2.2 and SAE J2602-supports fast programming via LIN

8-bit ADC with 7 channels for Voltage and Temperature supervision

10-bit ADC with 13 channels (6 Analog Inputs, 5 HV Monitor inputs and battery sense)

On chip oscillator & PLL

PWM signal generator and 16 bit timers

XMC4400 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex™-M4. As one of its key features it offers a high-resolution PWM unit with a tiny resolution of 150ps. This unique peripheral makes it especially suitable for digital power conversion in applications like solar inverters as well as SMPS and uninterruptible power supplies (UPS). Other applications are motor controllers, sense&control and IO devices for factory automation and user interface systems (HMI). XMC4400 is supported by Infineon's integrated development platform DAVE™ 3, which makes convenient, fast and application-orientated software development possible.                             

Summary of Features:

ARM® Cortex™-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)

8-channel DMA + dedicated DMAs for USB and Ethernet

Supply voltage range: 3.13 - 3.63V

USB 2.0 full-speed on-the-go

CPU Frequency: 120MHz

eFlash:512kB including hardware ECC

80kB SRAM

Package: TQFP-64

4xΔΣ-Demodulator

Temperature range: -40°.....85°

10/100 Ethernet MAC (/w IEEE 1588)

2x CAN, 64 MO

USIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]

32-bit Microcontrollers with ARM® Cortex®-M0 with smart application oriented features. The XMC1200 series belongs to the XMC1000 Family of industrial microcontrollers based on the ARM Cortex-M0 processor core. The XMC1200 series devices are optimized for LED Lighting applications and Human-Machine interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency.

Summary of Features:

32KB Flash, 16KB RAM

Supply voltage range 1.8 - 5.5 V

4 x 16-bit timers

10 channel 12-bit ADC, 2 x parallel sampling

2 channel USIC (configurable to SPI, UART, IIC, IIS)

LED brightness & color control module (BCCU)

2 x Comparators

Core frequency: 32[MHZ]

Peripherals clock: 64[MHZ]

Temperature Sensor

Pseudo Random Number Gererator

Real Time Clock

Watch Dog Timer

PG-TSSOP-16

Temperature range: -40 - 105°C

32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. XMC1000 is the number one choice for bringing traditional 32-bit designs to the next level, addressing a broad application spectrum from typical 32-bit applications up to digital power conversion and even field-oriented motor control. XMC1300 family can integrate all the control and analog interface functions required for sensor less Field Oriented Control (FOC), brushless (BLDC), brushed DC and PMSM motors.

Summary of Features:

64KB Flash, 16KB RAM

Supply voltage range: 1.8 - 5.5V

MATH co-processor for CORDIC & HW Divide

8 x 16-bit special purpose timers, dead time generation

Hall Sensor & Encoder I/F

LED brightness & color control module (BCCU)

12 channel 12-bit ADC, 2 x parallel sampling

2 channel USIC (configurable to SPI, UART, IIC, IIS)

3 x Comparators

Peripherals Clock: 64 [MHZ]

Temperature Sensor

Pseudo Random Number Gererator

Real Time Clock

Watch Dog Timer

PG-TSSOP-38

Temperature range: -40 - 105°C

Analog comparators with only 3 mv input offset voltage and a propagation delay of 30 ns

XMC4500 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex®-M4 core resulting in a power pack for energy-efficient industrial applications.

XMC4500 controllers feature a configurable peripheral set that allow to tailor the device to specific application needs. To capitalize fully on this flexibility, Infineon offers an industry-proven development environment DAVE™ that greatly eases SW development. DAVE™ 3 hosts a graphical user interface, low-level drivers, application libraries, an auto code generation engine and interfaces to generic or customer-selected development tools.                                 

Summary of Features:

ARM® Cortex®-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)

IEEE 1588 compliant Ethernet MAC

USB 2.0 full-speed on-the-go

CPU Frequency: 120MHz

eFlash: 1,024kB including hardware ECC

160kB SRAM

Package: PG-LQFP-144

USIC 6ch [Quad SPI, SCI/UART, I²C, I²S, LIN]

3x CAN, 64 MO

4x ΔΣ-Demodulator

Supply voltage range: 3.13 - 3.63V

Long-term availability with >15 years

Temperature range: -40°......125°    

The XMC4700 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4700 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications.             

Summary of Features:

ARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC

4 channel ΔΣ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range: -40 - 125°C

Safety package supporting SIL-2/3

The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities.                                                  Summary of Features:                                            ARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC4 channel ΔΣ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC

4 channel ΔΣ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC Interface

The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities.                                                  Summary of Features:                                            ARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC4 channel ∆Σ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz

2048kB Flash, 352kB RAM

Data and IP Protection on Flash

Supply voltage range: 3.13 - 3.63V

EtherCAT ® node

6 x CAN nodes

EthernetMAC, USB-OTG, SD/MMC

6 channel USIC (configurable to SPI, UART, IIC, IIS)

External Bus Unit

4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion

2 channel 12bit DAC

4 channel △Σ Demodulator

24 x 16-bit special purpose timers, dead time generation

2 x Position Interface

Watch Dog Timer, Real Time Clock

XMC4000 Functional Safety Package

Package: LQFP144

Temperature range:-40 - 125°C

SDIO/SD/MMC Interface

The XMC4100/4200 series belongs to the XMC4000 family of industrial microcontrollers based on the ARM Cortex-M4 processor core. the XMC4100/4200 series of microcontrollers take advantage of Infineon's decades of experience in microcontroller design, providing an optimized solution to meet the performance challenges of today's embedded control applications. The XMC4100/4200 series devices combine the extended functionality and performance of the ARM Cortex-M4 core with powerful on-chip peripheral subsystems and on-chip memory units.                                                 Summary of Features:

256KBFlash, 40 KB Ram

Supply voltage range: 3.13 - 3.63V

USIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]

1x PWM Timers (CCU8), 16-64Bit 8ch + Dead-Time

2x CAN, 64 MO

Peripherals Clock: 80 [MHZ]

Core frequency: 80 [MHZ]

Motor Control Hall and Encoder Interface

Industrial Connectivity

Package: VQFN-48

Temperature range: -40°… 125°

High Resolution PWM 150ps

Long Term Availability with >15 years

Free DAVE™ IDE and DAVE Apps

32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. The XMC1400 series devices are optimized for motor control, power conversion and LED Lighting applications and Human-Machine Interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency. The performance of XMC1400 will be increased with 70% over existing XMC1000 due to the 48 [MHz] of the core frequency and the 2 Can nodes interfaces.                                             

Summary of Features:

128KB Flash, 16KB RAM

Core frequency: 48[MHz]

Peripherals clock: 96 [MHZ]

Supply voltage range: 1.8 - 5.5 V

96MHz MATH co-processor for CORDIC & HW Divide

8x 96MHz 16-bit special purpose timers, dead time generation

Hall Sensor & Encoder I/F

LED brightness & color control module (BCCU)

12 channel 12-bit ADC, 2 x parallel sampling

2 channel USIC (configurable to SPI, UART, IIC, IIS)

3 x comparators

Temperature sensor

Pseudo random number generator

Real time clock

Watch dog timer

PG-TSSOP-38

Temperature range: -40 - 105°C

70%+ performance over existing XMC1000      

• Latest Trench Power AlphaMOS (αMOS MV) technology

• Very Low RDS(ON)

• Low Gate Charge

• Optimized for fast-switching applications

• RoHS and Halogen-Free Compliant                         

Application                                                 

• Synchronus Rectification in DC/DC and AC/DC Converters

• Isolated DC/DC Converters in Telecom and Industrial

The IDW30C65D2 from Infineon Technologies is a Power Diode with Forward Current 15 to 30 A, Forward Voltage 1.6 to 2.2 V, Repetitive Peak Reverse Voltage 650 V, Non-Repetitive Peak Forward Current 100 A, Recovery Time 51 nS. 

Summary of Features:

1.35 V temperature-stable forward voltage (VF)

Highest softness-factor for ultimate softness and low EMI filtering

Lowest Irrm to provide low turn-on losses on the boost switch

For applications switching between 18 kHz and 40 kHz

Potential Applications:

Telecom

Server

PC Power

UPS

Welding

Adapter

Air condition

Home appliance

AC-DC

Advanced Process Technology

Ula Low On-Resistance

Dynamic dv/dt Rating

175°C Operating Temperature

Fast Switching

Fully Avalanche RatedLead-Free                             

 Fifth Generation HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast  witching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications. The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy. The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. The through-hole version (IRF640NL) is available for lowprofile application.                 

Advanced Process Technology

Ula Low On-Resistance

Dynamic dv/dt Rating

175°C Operating Temperature

Fast Switching

Fully Avalanche RatedLead-Free                               

Fifth Generation HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications.

The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy.

The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application.

The through-hole version (IRF640NL) is available for lowprofile application.                 

Planar cell sucture for wide SOA

Optimized for broadest availability from disibution partners

Product qualification according to JEDEC standard

Silicon optimized for applications switching below <100KHz

Indusy standard surface-mount power package

Capable of being wave-soldered                                   

RoHS Compliant

Low RDS(on)

Dynamic dv/dt Rating

Fast Switching

Dual N-Channel MOSFET

Planar cell sucture for wide SOA

Optimized for broadest availability from disibution partners

Product qualification according to JEDEC standard

Silicon optimized for applications switching below <100KHz

Indusy standard surface-mount power package

Capable of being wave-soldered                                     

RoHS Compliant

Low RDS(on)

Dynamic dv/dt Rating

Fast Switching

Dual P-Channel MOSFET

Planar cell sucture for wide SOA

Optimized for broadest availability from disibution partners

Product qualification according to JEDEC standard

Silicon optimized for applications switching below <100KHz

Indusy standard surface-mount power package

Capable of being wave-soldered                                     

RoHS Compliant

Indusy-leading quality

Fully Characterized Avalanche Voltage and Current

Low Gate-to-Drain Charge to Reduce Switching Losses

Fully Characterized Capacitance Including Effective Coss to Simplify Design

Optimized for broadest availability from distribution partners

Product qualification according to JEDEC standard

Optimized for 10 V gate-drive voltage (called normal level)

Industry standard surface-mount power package

Capable of being wave-soldered

RoHS Compliant

Industry-leading quality

Low RDS(ON) at 4.5V VGS

Fully Characterized Avalanche Voltage and Current

Ultra-Low Gate Impedance                                       

RoHS Compliant

Industry-leading quality

Low RDS(ON) at 4.5V VGS

Fully Characterized Avalanche Voltage and Current

Ultra-Low Gate Impedance                                   

Synchronous MOSFET for Notebook

   Processor Power

Synchronous Rectifier MOSFET for

Isolated DC-DC Converters in

Networking Systems

Lead-Free

High Frequency 3.3V and 5V input Point- of-Load Synchronous Buck Converters for Netcom and Computing Applications

Power Management for Netcom, Computing and Portable Applications

Lead-Free                                                     

 
Ultra-Low Gate Impedance

Very Low RDS(on)

Fully Characterized Avalanche Voltage and Current

Optimized for broadest availability from distribution partners

Optimized for 4.5V gate-drive voltage(called Logic level), capable of being driven at 2.5V gate-drive voltage (called Super Logic level)

Reduced design complexity in high-side configuration (vs N-channel device)

Easier interface to Microcontroller (vs N-channel device)

Low specific on-state resistance (RDS(on)*A)

Very low energy storage in output capacitance (Eoss) @400V

Low gate charge (Qg)

Fieldproven CoolMOS™ quality

CoolMOS™ technology has been manufactured by Infineon since 1998

650V Cool MOSªCE Power Transistor Cool MOS™ isa revolutionary technology for high voltage power MOSFETs, designed according to the super junction(SJ) principle and pioneered by Infineon Technologies. Cool MOS™CE is a price-er form an ce optimized platform enabling to target cost sensitive application sin Consumer and Lighting markets by still meeting highest efficiency standards. The new series provides all benefit so fa fast switching Super junction MOSFET while not sacrificing ease of use and offering the best cost down performance ratio available on the market.

The latest 800V Cool MOS™ P7  series sets a new bench mark in 800V super junction technologies and combines best-in-class performance with state of the art ease-of-use,resulting from Infineon’s over 18 years

pioneering super junction technology innovation.

Potential applications:

Recommended for hard and soft switching fly back to pologies for LED Lighting, low power Charger sand Adapters,Audio, AUX power and Industrial power. Also suitable for PFC stage in Consumer applications and Solar.

The IR MOSFET family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications.The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. 

Planar cell structure for wide SOA

Optimized for broadest availability from distribution partners

Product qualification according to JEDEC standard

Silicon optimized for applications switching below <100kHz

Industry standard through-hole power package

High-current rating                                               

The IR MOSFET family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications.The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design.                             

 Planar cell structure for wide SOA

Optimized for broadest availability from distribution partners

Product qualification according to JEDEC standard

Silicon optimized for applications switching below <100kHz

Industry standard through-hole power package

High-current rating  

           

The IR MOSFET™ family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications. The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. The optimized gate drive options enables designers the flexibility of selecting super, logic or normal level drives.                                         

Optimized for broadest availability from distribution partners

Product qualification according to JEDEC standard

Industry standard through-hole power package

High-current carrying capability package

Applications

High Efficiency Synchronous Rectification in SMPS

Uninterruptible Power Supply

High Speed Power Switching

Hard Switched and High Frequency Circuits