TL-FC111A is a 100 Gigabit single-mode single-fiber optical fiber transceiver, which provides a 100 Gigabit electrical port and a 100 Gigabit SC optical port, which can convert the electrical port signal to the optical port signal, and carry out long-distance data transmission through optical fiber. The TL-FC111A uses wavelength division multiplexing technology, with a transmit wavelength of 1550nm and a receive wavelength of 1310nm, and receives and transmits data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 20 km. TL-FC111A is recommended to be used in conjunction with TL-FC111B to give full play to the product performance. 1 x 100 Gigabit SC optical port, 1 x 100 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1550nm (transmit), 1310nm (receive)

TL-FC111B is a 100 Gigabit single-mode single-fiber optical fiber transceiver, which provides a 100 Gigabit electrical port and a 100 Gigabit SC optical port, which can convert the electrical port signal to the optical port signal and carry out long-distance data transmission through optical fiber. The TL-FC111B uses wavelength division multiplexing technology, with a transmit wavelength of 1310nm and a receive wavelength of 1550nm, to receive and transmit data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 20 km. TL-FC111B is recommended to be used in conjunction with TL-FC111A to give full play to the product performance. 1 x 100 Gigabit SC optical port, 1 x 100 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive)

TL-FC114B is a 100 Gigabit single-mode single-fiber optical fiber transceiver, providing 4 100 Gigabit electrical ports and 1 100 Gigabit SC optical port, which can convert electrical port signals to optical port signals and conduct long-distance data transmission through optical fibers. The TL-FC114B uses wavelength division multiplexing technology, with a transmit wavelength of 1310nm and a receive wavelength of 1550nm, receiving and sending data simultaneously through a single mode optical fiber, with a maximum transmission distance of 20 km. TL-FC114B is recommended to be used in conjunction with TL-FC111A to give full play to product performance. 1 x 100 Gigabit SC optical port, 4 x 100 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive)

TL-FC114PB is a 100 Gigabit single-mode single-fiber optical fiber transceiver that supports PoE function, providing 4 100 Gigabit electrical ports and 1 100 Gigabit SC optical port that supports PoE function, which can convert electrical port signals to optical port signals and transmit data over long distances through optical fibers. The TL-FC114PB uses wavelength division multiplexing technology, transmits 1310nm and receives 1550nm, and receives and transmits data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 20 kilometers. The TL-FC114PB has a built-in dedicated PSE chip, supports multi-point detection technology, accurately samples the real-time current, and provides safe and stable power supply for the powered equipment. The TL-FC114PB supports intelligent power management, which can intelligently disconnect the power supply of low-priority ports according to the port priority when the total power exceeds the rated standard, so as to avoid power overrun and ensure continuous and stable power supply to important ports. TL-FC114PB has perfect protection mechanisms such as over-current, over-voltage, surge, short circuit, etc., and each port is equipped with independent circuits and fuses, which can still ensure the normal operation of other ports even if individual lines fail. TL-FC114PB is recommended to be used in conjunction with TL-FC111A to give full play to the performance of the product. 1 100 Gigabit SC optical port, 4 100 Gigabit RJ45 Ethernet ports with PoE function Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive) Supports the IEEE802.3at standard and is compatible with IEEE802.3af powered devices The PoE output power of the whole machine is 57W, and it supports intelligent power management and port priority mechanism, and the maximum output of a single port can reach 30W

TL-FC123AB is a 100 Gigabit single-mode single-fiber optical fiber transceiver, providing 3 100 Gigabit electrical ports and 2 100 Gigabit SC optical ports, which can convert electrical port signals to optical port signals and carry out long-distance data transmission through optical fibers. The TL-FC123AB has both A and B optical ports, which is convenient for pairing with the peer and can form a cascade topology, which is more flexible than conventional single-port fiber transceivers. The TL-FC123AB uses wavelength division multiplexing technology, which allows each optical port to receive and transmit data simultaneously with a single single-mode optical fiber, and the maximum transmission distance can be up to 20 kilometers. *TL-FC123AB can be used with TL-FC111A and TL-FC114B. 2 100 Gigabit SC optical ports, 3 100 Gigabit RJ45 network ports Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: A-terminal: 1550nm (transmit), 1310nm (receive), B-terminal: 1310nm (transmit), 1550nm (receive)

TL-FC1400 is a highly integrated fiber optic transceiver center device, which can integrate up to 14 fiber optic transceivers and provide unified power supply, with a simple structure and easy management and maintenance. TL-FC1400 is fully compatible with the new version of TP-LINK's single-port fiber optic transceivers, including 100 Gigabit/Gigabit, single fiber/dual fiber, single mode/multi-mode and other specifications. The TL-FC1400 supports hot-swappable operation of each fiber optic transceiver, making it very flexible to use. The TL-FC1400 adopts a proven and reliable built-in switching power supply design to support long-term stable operation, and provides over-voltage and over-current protection to ensure that every fiber optic transceiver has a safe and stable power input. Fully compatible with the new version of TP-LINK's single-port fiber optic transceiver It adopts a mature and reliable built-in switching power supply design to provide safe and stable power output Standard 19-inch 2U rack design

TL-FC1420 is a highly integrated fiber optic transceiver center device, which can integrate up to 14 fiber optic transceivers and provide unified power supply, with a simple structure and easy management and maintenance. TL-FC1420 is fully compatible with the new version of TP-LINK's single-port optical transceivers, including 100 Gigabit/Gigabit, single fiber/dual fiber, single mode/multi-mode and other specifications. The TL-FC1420 supports hot-swappable operation of each fiber optic transceiver, making it very flexible to use. TL-FC1420 has two built-in high-reliability switching power supplies, redundant backup with each other, which can support long-term stable operation, and provides over-voltage and over-current protection to ensure that each fiber optic transceiver has a safe and stable power input. Fully compatible with the new version of TP-LINK's single-port fiber optic transceiver Built-in 2 high-reliability switching power supplies, redundant backup Standard 19-inch 2U rack design

Different from the previous unmanaged optical fiber transceivers, TP-LINK cloud optical fiber provides efficient, simple, secure and easy-to-use remote management methods, supports intelligent deployment, automatic configuration networking, abnormal alarm and other functions, and can easily get started without professional IT operation and maintenance personnel. Application scenarios for network access in hotels and enterprise campuses. 1 x 100/1000Mbps SC fiber port, 1 x 10/100/1000Mbps RJ45 network port Based on wavelength division multiplexing technology (transmit wavelength 1550nm, receive wavelength 1310nm), single-mode single-fiber transmission, the maximum distance can reach 20 km It supports remote management of business cloud APP, web and local web management It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports QoS, bandwidth control, and broadcast storm suppression It is recommended to use it with TL-FC2311B-20 or TL-FC2314B-20 Full Gigabit port, supporting 20km single-mode single-fiber transmission The TL-FC2311A-20 provides one 100/1000Mbps SC fiber port and one 10/100/1000Mbps RJ45 network port. Using WDM (wavelength division multiplexing) technology, the transmit wavelength is 1550nm, the receiving wavelength is 1310nm, and the single fiber transmits and receives, saving half of the optical fiber wiring cost. With single-mode optical fiber, the transmission distance can reach up to 20km. It is recommended to use it with TL-FC2311B-20 or TL-FC2314B-20. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, just scan the QR code on the fuselage to add a fiber optic transceiver, and automatically identify all devices connected to the fiber optic transceiver. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Simple and practical network management functions 802.1P-based and DSCP-based QoS priority management modes are supported to optimize bandwidth configurations. Bandwidth control and broadcast storm suppression are supported, greatly improving overall network performance.

Different from the previous unmanaged optical fiber transceivers, TP-LINK cloud optical fiber provides efficient, simple, secure and easy-to-use remote management methods, supports intelligent deployment, automatic configuration networking, abnormal alarm and other functions, and can easily get started without professional IT operation and maintenance personnel. Application scenarios for network access in hotels and enterprise campuses. 1 x 100/1000Mbps SC fiber port, 1 x 10/100/1000Mbps RJ45 network port Based on wavelength division multiplexing technology (transmit wavelength 1550nm, receive wavelength 1310nm), single-mode single-fiber transmission, up to 3 km It supports remote management of business cloud APP, web and local web management It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports QoS, bandwidth control, and broadcast storm suppression It is recommended to use it with TL-FC2311B-3 or TL-FC2314B-3 Full gigabit port, supporting 3km single-mode and single-fiber transmission The TL-FC2311A-3 provides one 100/1000Mbps SC fiber port and one 10/100/1000Mbps RJ45 network port. Using WDM (wavelength division multiplexing) technology, the transmit wavelength is 1550nm, the receiving wavelength is 1310nm, and the single fiber transmits and receives, saving half of the optical fiber wiring cost. With single-mode fiber, the transmission distance can reach up to 3km. It is recommended to use it with TL-FC2311B-3 or TL-FC2314B-3. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, just scan the QR code on the fuselage to add a fiber optic transceiver, and automatically identify all devices connected to the fiber optic transceiver. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Simple and practical network management functions 802.1P-based and DSCP-based QoS priority management modes are supported to optimize bandwidth configurations. Bandwidth control and broadcast storm suppression are supported, greatly improving overall network performance.

Different from the previous unmanaged optical fiber transceivers, TP-LINK cloud optical fiber provides efficient, simple, secure and easy-to-use remote management methods, supports intelligent deployment, automatic configuration networking, abnormal alarm and other functions, and can easily get started without professional IT operation and maintenance personnel. Application scenarios for network access in hotels and enterprise campuses. 1 x 100/1000Mbps SC fiber port, 1 x 10/100/1000Mbps RJ45 network port Based on wavelength division multiplexing technology (transmit wavelength 1310nm, receive wavelength 1550nm), single-mode single-fiber transmission, up to 20 km It supports remote management of business cloud APP, web and local web management It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports QoS, bandwidth control, and broadcast storm suppression Recommended for use with TL-FC2311A-20 Full Gigabit port, supporting 20km single-mode single-fiber transmission The TL-FC2311B-20 provides one 100/1000Mbps SC fiber port and one 10/100/1000Mbps RJ45 network port. Using WDM (wavelength division multiplexing) technology, the transmit wavelength is 1310nm, the receiving wavelength is 1550nm, and the single fiber transmits and receives, saving half of the optical fiber wiring cost. With single-mode optical fiber, the transmission distance can reach up to 20km. Recommended for use with TL-FC2311A-20. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, just scan the QR code on the fuselage to add a fiber optic transceiver, and automatically identify all devices connected to the fiber optic transceiver. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Simple and practical network management functions 802.1P-based and DSCP-based QoS priority management modes are supported to optimize bandwidth configurations. Bandwidth control and broadcast storm suppression are supported, greatly improving overall network performance.

Different from the previous unmanaged optical fiber transceivers, TP-LINK cloud optical fiber provides efficient, simple, secure and easy-to-use remote management methods, supports intelligent deployment, automatic configuration networking, abnormal alarm and other functions, and can easily get started without professional IT operation and maintenance personnel. Application scenarios for network access in hotels and enterprise campuses. 1 x 100/1000Mbps SC fiber port, 1 x 10/100/1000Mbps RJ45 network port Based on wavelength division multiplexing technology (transmit wavelength 1310nm, receive wavelength 1550nm), single-mode single-fiber transmission, up to 3 km It supports remote management of business cloud APP, web and local web management It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports QoS, bandwidth control, and broadcast storm suppression It is recommended to use it with TL-FC2311A-3 Full gigabit port, supporting 3km single-mode and single-fiber transmission TL-FC2311B-3 provides one 100/1000Mbps SC fiber port and one 10/100/1000Mbps RJ45 network port. Using WDM (wavelength division multiplexing) technology, the transmit wavelength is 1310nm, the receiving wavelength is 1550nm, and the single fiber transmits and receives, saving half of the optical fiber wiring cost. With single-mode fiber, the transmission distance can reach up to 3km. It is recommended to use it with TL-FC2311A-3. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, just scan the QR code on the fuselage to add a fiber optic transceiver, and automatically identify all devices connected to the fiber optic transceiver. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Simple and practical network management functions 802.1P-based and DSCP-based QoS priority management modes are supported to optimize bandwidth configurations. Bandwidth control and broadcast storm suppression are supported, greatly improving overall network performance.

Different from the previous unmanaged optical fiber transceivers, TP-LINK cloud optical fiber provides efficient, simple, secure and easy-to-use remote management methods, and supports functions such as intelligent deployment, automatic configuration networking, and abnormal alarms. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 1 x 100/1000Mbps SC fiber port, 4 x 10/100/1000Mbps RJ45 network port Based on wavelength division multiplexing technology (transmit wavelength 1310nm, receive wavelength 1550nm), single-mode single-fiber transmission, up to 20 km It supports remote management of business cloud APP, web and local web management It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port aggregation, port traffic statistics, port monitoring, and port isolation Recommended for use with TL-FC2311A-20 Full Gigabit port, supporting 20km single-mode single-fiber transmission The TL-FC2314B-20 provides one 100/1000Mbps SC fiber port and four 10/100/1000Mbps RJ45 ports. Using WDM (wavelength division multiplexing) technology, the transmit wavelength is 1310nm, the receiving wavelength is 1550nm, and the single fiber transmits and receives, saving half of the optical fiber wiring cost. With single-mode optical fiber, the transmission distance can reach up to 20km. Recommended for use with TL-FC2311A-20. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, just scan the QR code on the fuselage to add a fiber optic transceiver, and automatically identify all devices connected to the fiber optic transceiver. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection automatically detects the network topology and automatically repairs the loop as soon as it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

Different from the previous unmanaged optical fiber transceivers, TP-LINK cloud optical fiber provides efficient, simple, secure and easy-to-use remote management methods, and supports functions such as intelligent deployment, automatic configuration networking, and abnormal alarms. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 1 x 100/1000Mbps SC fiber port, 4 x 10/100/1000Mbps RJ45 network port Based on wavelength division multiplexing technology (transmit wavelength 1310nm, receive wavelength 1550nm), single-mode single-fiber transmission, up to 3 km It supports remote management of business cloud APP, web and local web management It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port aggregation, port traffic statistics, port monitoring, and port isolation It is recommended to use it with TL-FC2311A-3 Full gigabit port, supporting 3km single-mode and single-fiber transmission The TL-FC2314B-3 provides one 100/1000Mbps SC fiber port and four 10/100/1000Mbps RJ45 network ports. Using WDM (wavelength division multiplexing) technology, the transmit wavelength is 1310nm, the receiving wavelength is 1550nm, and the single fiber transmits and receives, saving half of the optical fiber wiring cost. With single-mode fiber, the transmission distance can reach up to 3km. It is recommended to use it with TL-FC2311A-3. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, just scan the QR code on the fuselage to add a fiber optic transceiver, and automatically identify all devices connected to the fiber optic transceiver. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection automatically detects the network topology and automatically repairs the loop as soon as it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

The TL-FC311A-20 is a gigabit single-mode single-fiber optical fiber transceiver, which provides a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and carry out long-distance data transmission through optical fiber. TL-FC311A-20 adopts wavelength division multiplexing technology, transmit wavelength 1550nm, receive wavelength 1310nm, receive and transmit data through a single-mode fiber at the same time, the maximum transmission distance is 20 kilometers. TL-FC311A-20 is recommended to be used in conjunction with TL-FC311B-20 to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1550nm (transmit), 1310nm (receive)

The TL-FC311A-3 is a gigabit single-mode single-fiber optical fiber transceiver that provides a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and transmit data over long distances through optical fiber. The TL-FC311A-3 uses wavelength division multiplexing technology, with a transmit wavelength of 1550nm and a receive wavelength of 1310nm, and receives and transmits data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 3 km. TL-FC311A-3 is recommended to be used in conjunction with TL-FC311B-3 to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 3 kilometers Operating wavelength: 1550nm (transmit), 1310nm (receive)

The TL-FC311A-40 is a Gigabit single-mode single-fiber fiber transceiver, which provides a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and transmit data over long distances through optical fiber. The TL-FC311A-40 uses wavelength division multiplexing technology, with a transmit wavelength of 1550nm and a receive wavelength of 1310nm, and receives and transmits data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 40 kilometers. TL-FC311A-40 is recommended to be used in conjunction with TL-FC311B-40 to give full play to the product's performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 40 kilometers Operating wavelength: 1550nm (transmit), 1310nm (receive)

The TL-FC311A-60 is a gigabit single-mode single-fiber fiber transceiver, providing a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and carry out long-distance data transmission through optical fiber. TL-FC311A-60 adopts wavelength division multiplexing technology, transmit wavelength 1550nm, receive wavelength 1490nm, receive and transmit data through a single-mode optical fiber at the same time, with a maximum transmission distance of 60 km. TL-FC311A-60 is recommended to be used in conjunction with TL-FC311B-60 to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 60 kilometers Operating wavelength: 1550nm (transmit), 1490nm (receive)

The TL-FC311A-S is a Gigabit single-mode single-fiber optical fiber transceiver, providing a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and transmit data over long distances through optical fiber. TL-FC311A-S adopts wavelength division multiplexing technology, transmit wavelength 1550nm, receive wavelength 1310nm, receive and transmit data through a single-mode fiber at the same time, and the maximum transmission distance is 1 km. The TL-FC311A-S is recommended to be used in conjunction with the TL-FC311B-S to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 1 km Operating wavelength: 1550nm (transmit), 1310nm (receive)

TL-FC311B-20 is a gigabit single-mode single-fiber fiber transceiver, providing a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert electrical port signals to optical port signals and conduct long-distance data transmission through optical fiber. TL-FC311B-20 adopts wavelength division multiplexing technology, with a transmit wavelength of 1310nm and a receive wavelength of 1550nm, which receives and transmits data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 20 kilometers. TL-FC311B-20 is recommended to be used in conjunction with TL-FC311A-20 to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive)

The TL-FC311B-3 is a Gigabit single-mode single-fiber optical fiber transceiver, providing a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and carry out long-distance data transmission through optical fiber. TL-FC311B-3 adopts wavelength division multiplexing technology, transmit wavelength 1310nm, receive wavelength 1550nm, receive and transmit data through a single-mode optical fiber at the same time, and the maximum transmission distance is 3 km. TL-FC311B-3 is recommended to be used in conjunction with TL-FC311A-3 to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 3 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive)

TL-FC311B-40 is a Gigabit single-mode single-fiber fiber transceiver, providing a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert electrical port signals to optical port signals and conduct long-distance data transmission through optical fibers. TL-FC311B-40 adopts wavelength division multiplexing technology, transmit wavelength 1310nm, receive wavelength 1550nm, receive and transmit data through a single-mode optical fiber at the same time, with a maximum transmission distance of 40 km. TL-FC311B-40 is recommended to be used in conjunction with TL-FC311A-40 to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 40 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive)

The TL-FC311B-60 is a Gigabit single-mode single-fiber fiber transceiver, providing a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and carry out long-distance data transmission through optical fiber. TL-FC311B-60 adopts wavelength division multiplexing technology, transmit wavelength 1490nm, receive wavelength 1550nm, receive and send data through a single-mode fiber at the same time, the maximum transmission distance is 60 kilometers. TL-FC311B-60 is recommended to be used in conjunction with TL-FC311A-60 to give full play to the product performance. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 60 kilometers Operating wavelength: 1490nm (transmit), 1550nm (receive)

TL-FC311B-P3 is an innovative optical fiber product launched by TP-LINK, which integrates optical fiber transceiver and power supply functions, and adopts a drawer-type housing structure, which can easily cope with the impact of rain, snow, high temperature and other bad weather, and meet the needs of various indoor and outdoor scenarios. TL-FC311B-P3 provides a gigabit electrical port and a gigabit SC optical port to support electrical and optical signal conversion, and adopts wavelength division multiplexing technology, the transmit wavelength is 1310nm, the receiver wavelength is 1550nm, and the data can be received and sent simultaneously through a single-mode optical fiber, and the maximum transmission distance can reach 3 kilometers. The TL-FC311B-P3 also provides a 12VDC output interface, which can be used to power the device at any time, eliminating the need for additional power supply equipment. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port, 1 DC output port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 3 kilometers The transmit wavelength is 1310nm, and the receive wavelength is 1550nm The stable output voltage is 12V, and the maximum output power is 15.6W 170-240VAC voltage input, adapt to the national mains It adopts drawer-type rainproof design, PC fireproof and flame-retardant shell It can be mounted on a wall or pole It can be adapted to the mainstream network cameras on the market

The TL-FC311B-S is a gigabit single-mode single-fiber fiber optic transceiver that provides a 1000Mbps electrical port and a 1.25Gbps SC optical port, which can convert the electrical port signal to the optical port signal and transmit data over long distances through optical fiber. The TL-FC311B-S uses wavelength division multiplexing technology, transmit wavelength 1310nm, receive wavelength 1550nm, receive and transmit data simultaneously through a single-mode optical fiber, and the maximum transmission distance is 1 km. TL-FC311B-S is recommended to be used in conjunction with TL-FC311A-S to give full play to the performance of the product. 1 Gigabit SC optical port, 1 Gigabit RJ45 network port Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 1 km Operating wavelength: 1310nm (transmit), 1550nm (receive)

The TL-FC312-20 is a gigabit single-mode dual-fiber optical fiber transceiver, which provides a 1000Mbps electrical port and a pair of 1.25Gbps SC optical ports, which can convert the electrical port signal to the optical port signal and transmit data over long distances through optical fiber. TL-FC312-20 adopts standard SC interface, working wavelength 1310nm, single-mode dual-fiber transmission, up to 20 km. 1 pair of Gigabit SC optical ports and 1 Gigabit RJ45 network port Single-mode and dual-fiber transmission, with a maximum transmission distance of 20 kilometers Operating wavelength: 1310nm

TL-FC312B-P3 is an innovative optical fiber product launched by TP-LINK, which integrates optical fiber transceiver and power supply functions, and adopts a drawer-type housing structure, which can easily cope with the impact of rain, snow, high temperature and other bad weather, and meet the needs of various indoor and outdoor scenarios. TL-FC312B-P3 provides two gigabit electrical ports and one gigabit SC optical port to support electrical and optical signal conversion, and adopts wavelength division multiplexing technology, with a transmit wavelength of 1310nm and a reception wavelength of 1550nm, which can receive and send data simultaneously through a single-mode optical fiber, and the maximum transmission distance can reach 3 kilometers. The TL-FC311B-P3 also provides two 12VDC output ports, which can be used to power the device at any time, eliminating the need for additional power supply equipment. 1 Gigabit SC optical port, 2 Gigabit RJ45 network ports, 2 DC output ports Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 3 kilometers The transmit wavelength is 1310nm, and the receive wavelength is 1550nm Stable output voltage of 12V, maximum output power of 21.6W 170-240VAC voltage input, adapt to the national mains It adopts drawer-type rainproof design, PC fireproof and flame-retardant shell It can be mounted on a wall or pole It can be adapted to the mainstream network cameras on the market

TL-FC313F is a new fiber optic transceiver launched by TP-LINK, providing a Gigabit SFP port and a Gigabit RJ45 port to support optical and electrical signal conversion. The TL-FC313F requires an external optical module, and users can flexibly choose gigabit single-mode/multi-mode, single-fiber/dual-fiber, and SFP optical modules with different transmission distances according to actual networking requirements. 1 Gigabit SFP port, 1 Gigabit RJ45 port An external optical module is required, which is plug and play It can be used with gigabit single-mode/multi-mode, single-fiber/dual-fiber SFP optical modules

TL-FC314B-20 is a gigabit single-mode single-fiber optical fiber transceiver, providing four 1000Mbps electrical ports and one 1.25Gbps SC optical port, which can convert electrical port signals to optical port signals and transmit data over long distances through optical fibers. TL-FC314B-20 adopts wavelength division multiplexing technology, with a transmit wavelength of 1310nm and a receive wavelength of 1550nm, which receives and transmits data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 20 kilometers. TL-FC314B-20 is recommended to be used in conjunction with TL-FC311A-20 to give full play to the product performance. 1 Gigabit SC optical port, 4 Gigabit RJ45 network ports Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive)

TL-FC314B-3 is a gigabit single-mode single-fiber optical fiber transceiver, providing four 1000Mbps electrical ports and one 1.25Gbps SC optical port, which can convert electrical port signals to optical port signals and conduct long-distance data transmission through optical fibers. The TL-FC314B-3 uses wavelength division multiplexing technology, with a transmit wavelength of 1310nm and a receive wavelength of 1550nm, which receives and transmits data simultaneously through a single-mode optical fiber, with a maximum transmission distance of 3 km. TL-FC314B-3 is recommended to be used in conjunction with TL-FC311A-3 to give full play to the product performance. 1 Gigabit SC optical port, 4 Gigabit RJ45 network ports Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 3 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive)

The TL-FC314PB-20 is a Gigabit single-mode single-fiber fiber transceiver that supports PoE function, providing four 1000Mbps electrical ports and one 1.25Gbps SC optical port that supports PoE function, which can convert electrical port signals to optical port signals and conduct long-distance data transmission through optical fibers. TL-FC314PB-20 uses wavelength division multiplexing technology, transmits wavelength 1310nm, receives wavelength 1550nm, receives and transmits data simultaneously through a single-mode optical fiber, and transmits data at a maximum distance of 20 kilometers. The TL-FC314PB-20 has a built-in dedicated PSE chip, supports multi-point detection technology, accurately samples real-time current, and provides safe and stable power supply for the powered equipment. The TL-FC314PB-20 supports intelligent power management, which can intelligently disconnect the power supply of low-priority ports according to the port priority when the total power exceeds the rated standard, so as to avoid power overrun and ensure continuous and stable power supply to important ports. TL-FC314PB-20 has perfect protection mechanisms such as over-current, over-voltage, surge, short circuit, etc., and each port is equipped with independent circuits and fuses, which can still ensure the normal operation of other ports even if individual lines fail. TL-FC314PB-20 is recommended to be used in conjunction with TL-FC311A-20 to give full play to the product performance. 1 Gigabit SC optical port and 4 Gigabit RJ45 Ethernet ports with PoE function Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers Operating wavelength: 1310nm (transmit), 1550nm (receive) Supports the IEEE802.3at standard and is compatible with IEEE802.3af powered devices The PoE output power of the whole machine is 57W, and it supports intelligent power management and port priority mechanism, and the maximum output of a single port can reach 30W