This, the thinnest, 2.5mm (.098") pitch connector, is 8.1mm (.319") in height after mounting and 3.8mm (.150") in width. It is designed to meet the demand for the high density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.

Features

• Compact and slim

This connector is designed to be compact and unusually thin. It measures only 8.1mm (.319") high after mounting and is just 3.8mm (.150") wide.

• Highly reliable contact

The contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying.

• Polarizing guides

The header and housing have guides to prevent improper mating.

• Whisker prevention

The contact material is treated with a reflow process, and the square post is copper-undercoated and tin/lead-plated for whisker prevention.

• Easy and effective crimping

Although the contact is compact, it has a long wire strip length, 2.6±0.4mm (.102"±.016"). This long length is very useful for automatic crimping and when crimping shielded wires.

The B2B-XH-A parts manufactured by JST are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The B2B-XH-A components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the B2B-XH-A Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.

The B2B-PH-SM4-TB(LF)(SN) is CONN HEADER PH TOP 2POS 2MM SMD, that includes Natural Color, they are designed to operate with a PH Series, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Termination features such as Solder, Mounting Type is designed to work in Surface Mount, as well as the Solder Retention Features, the device can also be used as Header, Shrouded Connector Type. In addition, the Contact Finish is Tin, the device is offered in 2 Number of Positions, the device has a All of Number of Positions Loaded, and Pitch is 0.079" (2.00mm), and the Number of Rows is 1, and Contact Type is Male Pin, and the Fastening Type is Detent Lock, and Contact Mating Length is 0.130" (3.30mm).

The B2B-PH-SM4-TBT(LF)(SN) is CONN HEADER PH TOP 2POS 2MM SMD, that includes Solder Termination, they are designed to operate with a PH Series, Pitch is shown on datasheet note for use in a 0.079" (2.00mm), that offers Packaging features such as Digi-ReelR Alternate Packaging, Number of Rows is designed to work in 1, as well as the All Number of Positions Loaded, the device can also be used as 2 Number of Positions. In addition, the Mounting Type is Surface Mount, the device is offered in Solder Retention Features, the device has a Detent Lock of Fastening Type, and Contact Type is Male Pin, and the Contact Mating Length is 0.130" (3.30mm), and Contact Finish is Tin, and the Connector Type is Header, Shrouded, and Color is Natural.

B2B-PH-TW-S (LF)(SN) with circuit diagram, that includes Receptacle, Female Sockets Convert From Adapter End, they are designed to operate with a Receptacle, Female Sockets Convert To Adapter End, Mounting Type is shown on datasheet note for use in a Free Hanging (In-Line), that offers Number of Positions features such as 2, Number of Rows is designed to work in 1, as well as the 0.079" (2.00mm) Pitch, the device can also be used as PH Series.

This small, field-proven connector for printed circuit boards is reliable and has a large current carrying capacity. It can be used with a wide variety of signal, power supply, and output circuits that appear in consumer electronic products.

• Proven box contact

• Compact connector with a large capacity

• Secure contact and mounting

Specifications

• Current rating: 10A AC, DC (AWG #16)

• Voltage rating: 250V AC, DC

• Temperature range: -25˚C to +85˚C

(including temperature rise in applying electrical current)

• Contact resistance: Initial value/ 10m Ω max.

After environmental testing/ 20m Ω max.

• Insulation resistance: 1,000M Ω min.

• Withstanding voltage: 1,500V AC/minute

• Applicable wire: AWG #22 to #16

• Applicable PC board thickness: 1.6mm

The B4B-PH-SM4-TB(LF)(SN)(P) parts manufactured by JST are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The B4B-PH-SM4-TB(LF)(SN)(P) components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the B4B-PH-SM4-TB(LF)(SN)(P) Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.

The B4B-PH-SM4-TB(LF)(SN) is CONN HEADER PH TOP 4POS 2MM SMD, that includes Natural Color, they are designed to operate with a PH Series, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Termination features such as Solder, Mounting Type is designed to work in Surface Mount, as well as the Solder Retention Features, the device can also be used as Header, Shrouded Connector Type. In addition, the Contact Finish is Tin, the device is offered in 4 Number of Positions, the device has a All of Number of Positions Loaded, and Pitch is 0.079" (2.00mm), and the Number of Rows is 1, and Contact Type is Male Pin, and the Fastening Type is Detent Lock, and Contact Mating Length is 0.130" (3.30mm).

The B4B-PH-SM3-TB is CONN HEADER PH TOP 4POS 2MM SMD, that includes Solder Termination, they are designed to operate with a PH Series, Pitch is shown on datasheet note for use in a 0.079" (2.00mm), that offers Packaging features such as Cut Tape (CT), Number of Rows is designed to work in 1, as well as the All Number of Positions Loaded, the device can also be used as 4 Number of Positions. In addition, the Mounting Type is Surface Mount, the device is offered in Solder Retention Features, the device has a Detent Lock of Fastening Type, and Contact Type is Male Pin, and the Contact Mating Length is 0.130" (3.30mm), and Contact Finish is Tin-Lead, and the Connector Type is Header, Shrouded, and Color is Natural.

The B4B-PH-K-S(LF)(SN) is CONN HEADER PH TOP 4POS 2MM, that includes Natural Color, they are designed to operate with a Header, Shrouded Connector Type, Contact Finish is shown on datasheet note for use in a Tin, that offers Contact Mating Length features such as 0.130" (3.30mm), Contact Type is designed to work in Male Pin, as well as the Detent Lock Fastening Type, the device can also be used as Through Hole Mounting Type. In addition, the Number of Positions is 4, the device is offered in All Number of Positions Loaded, the device has a 1 of Number of Rows, and Packaging is Bulk, and the Pitch is 0.079" (2.00mm), and Series is PH, and the Termination is Press-Fit, Solder.

The B5B-XH-A(LF)(SN) parts manufactured by JST are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The B5B-XH-A(LF)(SN) components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

This small, field-proven connector for printed circuit boards is reliable and has a large current carrying capacity. It can be used with a wide variety of signal, power supply, and output circuits that appear in consumer electronic products.

• Proven box contact

• Compact connector with a large capacity

• Secure contact and mounting

Specifications

• Current rating: 10A AC, DC (AWG #16)

• Voltage rating: 250V AC, DC

• Temperature range: -25˚C to +85˚C

(including temperature rise in applying electrical current)

• Contact resistance: Initial value/ 10m Ω max.

After environmental testing/ 20m Ω max.

• Insulation resistance: 1,000M Ω min.

• Withstanding voltage: 1,500V AC/minute

• Applicable wire: AWG #22 to #16

• Applicable PC board thickness: 1.6mm

The BM02B-XASS-TF(LF)(SN) parts manufactured by JST are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The BM02B-XASS-TF(LF)(SN) components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the BM02B-XASS-TF(LF)(SN) Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.

The BM02B-SURS-TF(LF)(SN) is CONN HDR SUR TOP 2POS 0.8MM TIN, that includes Natural Color, they are designed to operate with a SUR Series, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Termination features such as Solder, Mounting Type is designed to work in Surface Mount, as well as the Solder Retention Features, the device can also be used as Header, Shrouded Connector Type. In addition, the Contact Finish is Tin, the device is offered in 2 Number of Positions, the device has a All of Number of Positions Loaded, and Pitch is 0.031" (0.80mm), and the Number of Rows is 1, and Contact Type is Outer Shroud Contact.

The BM02B-SRSS-TBT(LF)(SN) is CONN WIRE HDR 2POS 1MM STSMD, that includes Solder Termination, they are designed to operate with a SR Series, Pitch is shown on datasheet note for use in a 0.039" (1.00mm), that offers Packaging features such as Tape & Reel (TR) Alternate Packaging, Number of Rows is designed to work in 1, as well as the All Number of Positions Loaded, the device can also be used as 2 Number of Positions. In addition, the Mounting Type is Surface Mount, the device is offered in Solder Retention Features, the device has a Male Pin of Contact Type, and Contact Finish is Tin, and the Connector Type is Header, Shrouded, and Color is Natural.

The BM02B-XASS-TF is CONN HDR XA 2POS 2.5MM TIN SMD, that includes Natural Color, they are designed to operate with a Header, Shrouded Connector Type, Contact Finish is shown on datasheet note for use in a Tin-Lead, that offers Contact Type features such as Male Pin, Fastening Type is designed to work in Locking Ramp, as well as the Solder Retention Features, the device can also be used as Surface Mount Mounting Type. In addition, the Number of Positions is 2, the device is offered in All Number of Positions Loaded, the device has a 1 of Number of Rows, and Packaging is Tape & Reel (TR), and the Pitch is 0.098" (2.50mm), and Series is XA, and the Termination is Solder.

Features

• Ultra-compact insulation displacement connector

1.0mm (.039") pitch and only 3.0mm (.118") high (side entry type). This connector is only about 61% as large as the smallest conventional (JST) IDC designs.

• Header designed for vacuum pick and place robotics

Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum grippig equipment. Since there is enough flat surface for secure vacuum gripping, this miniature surface mount connector is versatile for designers and economic for manufacturing.

• Twin U-slot insulation displacement section

The insulation displacement section connected to each wire consists of two tin-plated slots (twin U-slots), which ensures reliable connection.

• 3-point grip construction

The 3-point insulation grip feature and the strain relief ensure a firm grip on terminated wires and protection of the insulation displacement connection from possible damage.

The BM05B-GHS-TBT parts manufactured by JST are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The BM05B-GHS-TBT components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the BM05B-GHS-TBT Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.

The BM04B-ZESS-TBT(LF)(SN) is CONN HEADER VERT SMD 4POS ZE, that includes Natural Color, they are designed to operate with a ZE Series, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Termination features such as Solder, Mounting Type is designed to work in Surface Mount, as well as the Solder Retention Features, the device can also be used as Header, Shrouded Connector Type. In addition, the Contact Finish is Tin, the device is offered in 4 Number of Positions, the device has a All of Number of Positions Loaded, and Pitch is 0.059" (1.50mm), and the Number of Rows is 1, and Contact Type is Outer Shroud Contact, and the Fastening Type is Locking Ramp.

The BM05B-AUHKS-GA-TB(LF)(SN) is CONN HEADER 5 POSITION, that includes Solder Termination, they are designed to operate with a AUH Series, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Number of Rows features such as 1, Number of Positions Loaded is designed to work in All, as well as the 5 Number of Positions, the device can also be used as Surface Mount, Right Angle Mounting Type. In addition, the Features is Solder Retention, the device is offered in Detent Lock Fastening Type, the device has a Male Blade of Contact Type, and Contact Finish is Gold, and the Connector Type is Header, Shrouded, and Color is Black.

The BM04B-SRSS-TB(LF)(SN) is CONN HEADER SH 4POS TOP 1MM TIN, that includes Natural Color, they are designed to operate with a Header, Shrouded Connector Type, Contact Finish is shown on datasheet note for use in a Tin, that offers Contact Type features such as Male Pin, Features is designed to work in Solder Retention, as well as the Surface Mount Mounting Type, the device can also be used as 4 Number of Positions. In addition, the Number of Positions Loaded is All, the device is offered in 1 Number of Rows, the device has a Digi-ReelR Alternate Packaging of Packaging, and Pitch is 0.039" (1.00mm), and the Series is SR, and Termination is Solder.

The BM04B-SRSS-TBT(LF)(SN) is CONN HEADER SH 4POS TOP 1MM TIN, that includes Tin Contact Finish, they are designed to operate with a Surface Mount Mounting Type, Series is shown on datasheet note for use in a SR, that offers Features features such as Solder Retention, Termination is designed to work in Solder, as well as the Natural Color, the device can also be used as Male Pin Contact Type. In addition, the Connector Type is Header, Shrouded, the device is offered in Digi-ReelR Alternate Packaging Packaging, the device has a All of Number of Positions Loaded, and Number of Positions is 4, and the Number of Rows is 1, and Pitch is 0.039" (1.00mm).

[JST-MFG]

2.0mm pitch/Disconnectable Crimp style connectors

This is a thin, low-profile 2.0mm pitch connector 8.0mm in height after mounting and 4.5mm in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.

• Reliable contact

• Fully shrouded header

• Printed circuit board retention mechanism

• Surface mount model (SMT)

The S2B-ZR-SM4A-TF(LF)(SN) parts manufactured by JST are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The S2B-ZR-SM4A-TF(LF)(SN) components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the S2B-ZR-SM4A-TF(LF)(SN) Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.

The S2B-ZR-SM3A-TF is CONN HEADER ZH SIDE 2POS 1.5MM, that includes Natural Color, they are designed to operate with a ZH Series, Packaging is shown on datasheet note for use in a Digi-ReelR, that offers Termination features such as Solder, Mounting Type is designed to work in Surface Mount, Right Angle, as well as the Solder Retention Features, the device can also be used as Header, Shrouded Connector Type. In addition, the Contact Finish is Tin-Lead, the device is offered in 2 Number of Positions, the device has a All of Number of Positions Loaded, and Pitch is 0.059" (1.50mm), and the Number of Rows is 1, and Contact Type is Male Pin, and the Fastening Type is Detent Lock.

The S2B-ZR-3.4(LF)(SN) is CONN SHROUDED HEADER 2 POS 1.5MM, that includes Press-Fit Termination, they are designed to operate with a ZH Series, Pitch is shown on datasheet note for use in a 0.059" (1.50mm), that offers Packaging features such as Bulk, Number of Rows is designed to work in 1, as well as the All Number of Positions Loaded, the device can also be used as 2 Number of Positions. In addition, the Mounting Type is Through Hole, Right Angle, the device is offered in Detent Lock Fastening Type, the device has a Male Pin of Contact Type, and Contact Mating Length is 0.094" (2.40mm), and the Contact Finish is Tin, and Connector Type is Header, Shrouded, and the Color is Natural.

S2B-ZR-SM4A-K-TF(LF)(SN) (P) with circuit diagram manufactured by JST. The S2B-ZR-SM4A-K-TF(LF)(SN) (P) is available in SMD Package, is part of the IC Chips.

The SM16B-ZPDSS-TF parts manufactured by JST are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The SM16B-ZPDSS-TF components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the SM16B-ZPDSS-TF Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.

SM16B-ZESS-TB(LF)(SN) with pin details, that includes Natural Color, they are designed to operate with a ZE Series, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Termination features such as Solder, Mounting Type is designed to work in Surface Mount, Right Angle, as well as the Solder Retention Features, the device can also be used as Header, Shrouded Connector Type. In addition, the Contact Finish is Tin, the device is offered in 16 Number of Positions, the device has a All of Number of Positions Loaded, and Pitch is 0.059" (1.50mm), and the Number of Rows is 1, and Contact Type is Outer Shroud Contact, and the Fastening Type is Locking Ramp.

The SM16B-SURS-TF(LF)(SN) is CONN HEADER 16PS .8MM TIN SIDE E, that includes Solder Termination, they are designed to operate with a SUR Series, Pitch is shown on datasheet note for use in a 0.031" (0.80mm), that offers Packaging features such as Digi-ReelR Alternate Packaging, Number of Rows is designed to work in 1, as well as the All Number of Positions Loaded, the device can also be used as 16 Number of Positions. In addition, the Mounting Type is Surface Mount, Right Angle, the device is offered in Solder Retention Features, the device has a Outer Shroud Contact of Contact Type, and Contact Finish is Tin, and the Connector Type is Header, Shrouded, and Color is Natural.

SM16B-XSRS(LF)(SN) with circuit diagram, that includes Natural Color, they are designed to operate with a Header, Shrouded Connector Type, Contact Finish is shown on datasheet note for use in a Tin, that offers Contact Type features such as Outer Shroud Contact, Mounting Type is designed to work in Surface Mount, Right Angle, as well as the 16 Number of Positions, the device can also be used as All Number of Positions Loaded. In addition, the Number of Rows is 1, the device is offered in Bulk Packaging, the device has a 0.023" (0.60mm) of Pitch, and Series is XSR, and the Termination is Solder.